This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 744 |
---|---|
SPECfp_rate_base95 | 722 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 2 | 73.5 | 906 | 2 | 74 | 905 |
102.swim | 2 | 118 | 1315 | 2 | 117 | 1319 |
103.su2cor | 2 | 50.3 | 501 | 2 | 50 | 504 |
104.hydro2d | 2 | 140 | 308 | 2 | 140 | 309 |
107.mgrid | 2 | 71.6 | 629 | 2 | 70 | 641 |
110.applu | 2 | 87.5 | 452 | 2 | 87 | 457 |
125.turb3d | 2 | 101 | 732 | 2 | 101 | 729 |
141.apsi | 2 | 57.5 | 658 | 2 | 55 | 693 |
145.fpppp | 2 | 122 | 1412 | 2 | 101 | 1718 |
146.wave5 | 2 | 49.7 | 1086 | 2 | 49 | 1104 |
SPECfp_rate_base95 | 722 | |||||
SPECfp_rate95 | 744 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Fort Collins, CO |
Test Date: | Feb-99 |
Hardware Avail: | May-99 |
Software Avail: | May-99 |
Hardware Information:
Model Name: | HP 9000 Model J5000 |
---|---|
CPU: | 440 MHz PA-RISC 8500 |
FPU: | Integrated |
Number of CPU(s): | 2 |
Primary Cache: | 1/2MBI+1MBD on-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 2 GB |
Disk Subsystem: | 1-9GB LVD SCSI Disk |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B.10.20.07 B3907CA |
File System: | HP-UX LVM with HFS |
System State: | Multi-user |
Notes:
Base Flags: all: +Oall +Odataprefetch -Wl,-a,archive Peak Flags: Linker: 145: -Wl,-a,archive; all others: -Wl,-a,archive,+FPD 101: +O3 +Onolimit +Odataprefetch +Oaggressive 102: +Oall +Odataprefetch +Onovectorize +Onofltacc +Onolooptransform +Onoloopblock +Ocache_pad_common 103: +Oall +Odataprefetch 104: +Oall +Onovectorize +Onofltacc +Odataprefetch 107: +O3 +Onolimit +Onofltacc +Oinline_budget=1000000 +Oloop_unroll=8 +Odataprefetch 110: +Oall +Onovectorize +Onofltacc +Odataprefetch 125: +Oall +Odataprefetch +Oagressive 141: +O3 +Onolimit +Oaggressive +Onofltacc 145: +O4 +Olibcalls +Onofltacc +Onolimit +Ovectorize +Oinline_budget=1000000 +I/+P 146: +Oall +Odataprefetch Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Jun 15 11:31:08 1999First published at SPEC.org on 08-Jun-1999