This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 48.6 |
---|---|
SPECfp_base95 | 46.7 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 47.6 | 77.6 | 47 | 78.2 |
102.swim | 8600 | 79.8 | 108 | 78 | 110 |
103.su2cor | 1400 | 49.5 | 28.3 | 49 | 28.3 |
104.hydro2d | 2400 | 100 | 24.0 | 99 | 24.2 |
107.mgrid | 2500 | 70.2 | 35.6 | 64 | 39.1 |
110.applu | 2200 | 66.0 | 33.3 | 64 | 34.3 |
125.turb3d | 4100 | 104 | 39.4 | 103 | 39.7 |
141.apsi | 2100 | 50.7 | 41.4 | 49 | 42.5 |
145.fpppp | 9600 | 134 | 71.8 | 110 | 87.2 |
146.wave5 | 3000 | 48.1 | 62.3 | 48 | 62.6 |
SPECfp_base95 | 46.7 | ||||
SPECfp95 | 48.6 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Fort Collins, CO |
Test Date: | Feb-99 |
Hardware Avail: | May-99 |
Software Avail: | May-99 |
Hardware Information:
Model Name: | HP 9000 Model C3000 |
---|---|
CPU: | 400 MHz PA-RISC 8500 |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 512KBI+1MBD on-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 256MB |
Disk Subsystem: | 1-9GB LVD SCSI Disk |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B.10.20.07 B3907CA |
File System: | HP-UX LVM with HFS |
System State: | Multi-user |
Notes:
Base Flags: all: +Oall +Odataprefetch -Wl,-a,archive Peak Flags: Linker: 145: -Wl,-a,archive; all others: -Wl,-a,archive,+FPD 101: +O3 +Onolimit +Odataprefetch +Oaggressive 102: +Oall +Odataprefetch +Onovectorize +Onofltacc +Onolooptransform +Onoloopblock +Ocache_pad_common 103: +Oall +Odataprefetch 104: +Oall +Onovectorize +Onofltacc +Odataprefetch 107: +O3 +Onolimit +Onofltacc +Oinline_budget=1000000 +Oloop_unroll=8 +Odataprefetch 110: +Oall +Onovectorize +Onofltacc +Odataprefetch 125: +Oall +Odataprefetch +Oagressive 141: +O3 +Onolimit +Oaggressive +Onofltacc 145: +O4 +Olibcalls +Onofltacc +Onolimit +Ovectorize +Oinline_budget=1000000 +I/+P 146: +Oall +Odataprefetch Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Jun 15 11:31:00 1999First published at SPEC.org on 08-Jun-1999