SPECfp95

Sun Microsystems

Ultra 2 Model 1400

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	134	27.6	117	31.7
102.swim	8600	231	37.2	218	39.4
103.su2cor	1400	106	13.2	95	14.7
104.hydro2d	2400	232	10.3	223	10.8
107.mgrid	2500	128	19.6	127	19.7
110.applu	2200	194	11.3	154	14.3
125.turb3d	4100	224	18.3	219	18.7
141.apsi	2100	78.7	26.7	72	29.2
145.fpppp	9600	404	23.8	278	34.5
146.wave5	3000	116	25.8	105	28.7
SPECfp_base95			19.8
		SPECfp95			22.3

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Apr-99
Hardware Avail:	May-99
Software Avail:	Feb-99

Hardware Information:

Model Name:	Ultra 2 Model 1400
CPU:	400 MHz UltraSPARC-II
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	2MB(I+D) off chip
Other Cache:	None
Memory:	512MB
Disk Subsystem:	2 x 9.1GB (7200 RPM)
Other Hardware:	Fast Ethernet
	System clock frequency: 100 MHz

Software Information:

Operating System:	Solaris 2.6 Hardware 3/98
Compiler:	Sun WorkShop FORTRAN 77 5.0
File System:	UFS
System State:	Single User
Kernel Extensions:	consistent_coloring=1

Notes:

P1= -xprofile=collect:`pwd`/../feedback; P2= -xprofile=use:`pwd`/../feedback; FOPTION= -fast -xarch=v8plusa -s
BCOPY = -Qoption iropt -O4+bcopy; INV = -Qoption iropt -O4+invccexp; BMR = -Qoption iropt -O4+bmerge
Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch
101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch -Qoption iropt -O4+data_access
102.swim:    -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2
103.su2cor:  ${FOPTION} -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2 ${BCOPY}
103.su2cor:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
104.hydro2d: ${FOPTION} -xprefetch -Qoption iropt -O4+pde -fsimple=2
104.hydro2d: PASS1= ${P1}; PASS2= ${P2}
107.mgrid:   ${FOPTION} -xprefetch -fsimple=2 ${BCOPY}
107.mgrid:   PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
110.applu:   -fast -xarch=v8plusa -Qoption iropt -O4+scalarrep+ddint+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr -fsimple=2
125.turb3d:  ${FOPTION} -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
125.turb3d:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
141.apsi:    ${FOPTION} -fsimple=2 -stackvar  -Qoption iropt -Si36  ${INV} ${BMR} -Qoption iropt -O4+algassoc
141.apsi:    PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
145.fpppp:   -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1
145.fpppp:   PASS1= ${P1}; PASS2= ${P2}
146.wave5:   ${FOPTION} -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Shell limits: # ulimit -n 1024  or % limit descriptors 1024
Config file: ultrabest.cfg

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 08-Jun-1999