SPECint95

Sun Microsystems

Ultra 10 Model 360

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
099.go	4600	351	13.1	328	14.0
124.m88ksim	1900	168	11.3	110	17.2
126.gcc	1700	137	12.4	127	13.4
129.compress	1800	127	14.2	108	16.7
130.li	1900	192	9.89	122	15.6
132.ijpeg	2400	191	12.6	185	13.0
134.perl	1900	175	10.9	110	17.2
147.vortex	2700	241	11.2	176	15.4
SPECint_base95			11.9
		SPECint95			15.2

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Sep-98
Hardware Avail:	Nov-98
Software Avail:	Oct-98

Hardware Information:

Model Name:	Ultra 10 Model 360
CPU:	360 MHz UltraSPARC-IIi
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	2MB(I+D) off chip
Other Cache:	None
Memory:	512MB
Disk Subsystem:	2 x 9.1GB
Other Hardware:	Fast Ethernet
	System clock frequency: 120 MHz

Software Information:

Operating System:	Solaris 2.6 3/98
Compiler:	Sun C SC5.0 EFT1 (8/98)
File System:	UFS
System State:	Single User
Kernel Extensions:	consistent_coloring=1

Notes:

P1= -xprofile=collect:`pwd`/../feedback; P2= -xprofile=use:`pwd`/../feedback
Baseline: -fast -xO5 -xarch=v8plusa
Baseline: PASS1= ${P1}; PASS2= ${P2}
Peak:  ALIGN = -Wc,-Qiselect-funcalign=32,-Qicache-L1-bsize=4-bbits=7; CULTRA = -xarch=v8plusa -xchip=ultra
099.go: -fast -xO4 -xarch=v8plus -xrestrict -xcrossfile -W2,-O4+ansi_alias+bopt
099.go: PASS1= ${P1}; PASS2= ${P2} ${ALIGN} -dn
124.m88ksim: -fast -xO5 -xsafe=mem -xarch=v8plus -xcrossfile -xrestrict -W2,-O4+cond_elim+pde,-ldstr,-Mt8500 -Wc,-Qiselect-sw_pf_tbl_th=20
124.m88ksim: PASS1= ${P1}; PASS2= ${P2} -dn
126.gcc: -fast -xO4 -xarch=v8plus -W2,-O4+ansi_alias+cond_elim
126.gcc: PASS1= ${P1}; PASS2= ${P2}
129.compress: -fast -xO5 -xsafe=mem -xarch=v8plus -xrestrict -W2,-O4+ansi_alias+pde -Wc,-Qms_pipe+unoovf
129.compress: PASS1= ${P1}; PASS2= ${P2} -dn
130.li: PASS1= -fast -xO4 -xarch=v8plus -xcrossfile ${P1}
130.li: PASS2= -fast -xO5 -xsafe=mem -xarch=v8plus -xcrossfile -W2,-O4+ansi_alias+cond_elim+pde,-Mt350,-whole,-crit ${P2} -dn
132.ijpeg: -fast -xO5 -xsafe=mem  -xarch=v8plus -W2,-O4+ansi_alias+cond_elim
132.ijpeg: PASS1= ${P1}; PASS2= ${P2} -dn
134.perl: -fast -xO4 ${CULTRA} -xcrossfile -W2,-ANSI_S,-Mp1,-O4+cond_elim -Wc,-Qiselect-sw_pf_tbl_th=30
134.perl: PASS1= ${P1}; PASS2= ${P2} -dn
147.vortex: PASS1= -fast -xO4 -xarch=v8plus -xcrossfile ${P1}
147.vortex: PASS2= -fast -xO5 -xsafe=mem -xarch=v8plus -xcrossfile ${P2} -W2,-O4+cond_elim,-Mt500,-Mr6000,-crit -dn
Portability: 124.m88ksim, 132.ijpeg: -DSYSV -Xc, 126.gcc: -Dalloca=__builtin_alloca -Xc
others: -Xc
Shell limits: # ulimit -n 1024  or % limit descriptors 1024
Config file: ultra10_int.cfg

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 08-Dec-1998