This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 237 |
|---|---|
| SPECfp_rate_base95 | 211 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 1 | 101 | 329 | 1 | 102 | 327 |
| 102.swim | 1 | 271 | 286 | 1 | 152 | 508 |
| 103.su2cor | 1 | 84.6 | 149 | 1 | 85 | 148 |
| 104.hydro2d | 1 | 206 | 105 | 1 | 188 | 115 |
| 107.mgrid | 1 | 130 | 173 | 1 | 118 | 191 |
| 110.applu | 1 | 129 | 154 | 1 | 126 | 157 |
| 125.turb3d | 1 | 215 | 171 | 1 | 210 | 176 |
| 141.apsi | 1 | 89.2 | 212 | 1 | 82 | 229 |
| 145.fpppp | 1 | 231 | 374 | 1 | 192 | 451 |
| 146.wave5 | 1 | 81.4 | 332 | 1 | 76 | 356 |
| SPECfp_rate_base95 | 211 | |||||
| SPECfp_rate95 | 237 | |||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Fort Collins, CO |
| Test Date: | Dec-97 |
| Hardware Avail: | Mar-98 |
| Software Avail: | Mar-98 |
Hardware Information:
| Model Name: | HP 9000 Model J2240 |
|---|---|
| CPU: | 236 MHz PA-8200 |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 2MBI+2MBD off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 2GB |
| Disk Subsystem: | 1 Ultra SCSI 4.0GB |
| Other Hardware: | None |
Software Information:
| Operating System: | HP-UX B.10.20 |
|---|---|
| Compiler: | f77 B3906AA B.10.20.01 |
| File System: | HP-UX |
| System State: | Multi-user |
Notes:
Base Flags: All: +Oall +Odataprefetch Linker Flag: All: -Wl,-aarchive Peak Flags: 101, 103: peak= base 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode +Oparallel_env 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I +P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +Oparallel_env Linker Flag: All: -Wl,-aarchive The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Mon Feb 9 15:40:13 PST 1998First published at SPEC.org on 20-Jan-1998