This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp95 | 6.77 |
|---|---|
| SPECfp_base95 | 6.57 |
| Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|
| 101.tomcatv | 3700 | 330 | 11.2 | 321 | 11.5 |
| 102.swim | 8600 | 497 | 17.3 | 448 | 19.2 |
| 103.su2cor | 1400 | 510 | 2.74 | 507 | 2.76 |
| 104.hydro2d | 2400 | 658 | 3.65 | 642 | 3.74 |
| 107.mgrid | 2500 | 559 | 4.47 | 497 | 5.04 |
| 110.applu | 2200 | 517 | 4.25 | 514 | 4.28 |
| 125.turb3d | 4100 | 685 | 5.99 | 660 | 6.21 |
| 141.apsi | 2100 | 329 | 6.38 | 329 | 6.37 |
| 145.fpppp | 9600 | 928 | 10.3 | 930 | 10.3 |
| 146.wave5 | 3000 | 291 | 10.3 | 297 | 10.1 |
| SPECfp_base95 | 6.57 | ||||
| SPECfp95 | 6.77 | ||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Cupertino, CA |
| Test Date: | Sep-95 |
| Hardware Avail: | Mar-95 |
| Software Avail: | Jul-96 |
Hardware Information:
| Model Name: | HP 9000 Model D250 |
|---|---|
| CPU: | 100 MHz PA-RISC 7200 |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 256KBI+ 256KBD off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 512MB |
| Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
| Other Hardware: | None |
Software Information:
| Operating System: | HP-UX B.10.20 |
|---|---|
| Compiler: | HP FORTRAN B3906AA B.10.20.01 |
| File System: | HP-UX |
| System State: | Multi-user |
Notes:
Base Flags: All: +Oall Linker Flag: All: -Wl, -a,archive Peak Flags: 101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +DC7200 +I/+P 102: +Oall +Ocache_pad_common +Odataprefetch +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +DC7200 . +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P 103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P 104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P 107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 110: +Oall +Onofastaccess 125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +DC7200 141: +Oall +Onofastaccess +DC7200 145: +Oall 146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl, -a,archive Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Oct 29 8:37:15 PST 1996First published at SPEC.org on 29-Oct-1996