SPECfp_rate95

Hewlett-Packard

HP 9000 Model J200

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

SPECfp_rate95	61.3
SPECfp_rate_base95	59.3

Benchmark # and Name Base # Copies Base Run Time Base SPEC Ratio Peak # Copies Peak Run Time Peak SPEC Ratio
101.tomcatv 1 329 101 1 316 105
102.swim 1 495 156 1 445 174
103.su2cor 1 518 24.3 1 509 24.7
104.hydro2d 1 658 32.8 1 655 33.0
107.mgrid 1 561 40.1 1 499 45.1
110.applu 1 513 38.6 1 510 38.8
125.turb3d 1 686 53.8 1 658 56.1
141.apsi 1 328 57.6 1 329 57.5
145.fpppp 1 932 92.8 1 933 92.6
146.wave5 1 281 96.0 1 282 95.7
SPECfp_rate_base95 59.3
SPECfp_rate95 61.3

Benchmark # and Name	Base # Copies	Base Run Time	Base SPEC Ratio	Peak # Copies	Peak Run Time	Peak SPEC Ratio
101.tomcatv	1	329	101	1	316	105
102.swim	1	495	156	1	445	174
103.su2cor	1	518	24.3	1	509	24.7
104.hydro2d	1	658	32.8	1	655	33.0
107.mgrid	1	561	40.1	1	499	45.1
110.applu	1	513	38.6	1	510	38.8
125.turb3d	1	686	53.8	1	658	56.1
141.apsi	1	328	57.6	1	329	57.5
145.fpppp	1	932	92.8	1	933	92.6
146.wave5	1	281	96.0	1	282	95.7
SPECfp_rate_base95	59.3
	SPECfp_rate95	61.3

Tester Information:

SPEC License #: 3
Tested By: Hewlett-Packard
Test Date: Aug-96
Hardware Avail: Aug-95
Software Avail: Sep-96

SPEC License #:	3
Tested By:	Hewlett-Packard
Test Date:	Aug-96
Hardware Avail:	Aug-95
Software Avail:	Sep-96

Hardware Information:

Model Name: HP 9000 Model J200
CPU: 100 MHz PA-RISC 7200
FPU: Integrated
Number of CPU(s): 1
Primary Cache: 256KBI+256KBD off-chip
Secondary Cache: None
Other Cache: None
Memory: 96MB
Disk Subsystem: 1 Fast/Wide SCSI-2 1.0 GB
Other Hardware: None

Model Name:	HP 9000 Model J200
CPU:	100 MHz PA-RISC 7200
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	256KBI+256KBD off-chip
Secondary Cache:	None
Other Cache:	None
Memory:	96MB
Disk Subsystem:	1 Fast/Wide SCSI-2 1.0 GB
Other Hardware:	None

Software Information:

Operating System: HP-UX B.10.20
Compiler: HP FORTRAN B3906AA B.10.20.01
File System: HP-UX
System State: Multi-user

Operating System:	HP-UX B.10.20
Compiler:	HP FORTRAN B3906AA B.10.20.01
File System:	HP-UX
System State:	Multi-user

Notes:

Base Flags:
All:  +Oall 
Linker Flag:  All: -Wl, -a,archive

Peak Flags:
101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +DC7200 +I/+P 
102: +Oall +Ocache_pad_common +Odataprefetch +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +DC7200 
.    +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P
103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P
104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P
107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 
110: +Oall +Onofastaccess
125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +DC7200
141: +Oall +Onofastaccess +DC7200
145: +Oall
146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit
Linker Flag:  All: -Wl, -a,archive

Note: The +I/+P indicates the use of profile based optimization.

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

[email protected]

Tue Oct 1 14:41:14 PDT 1996

First published at SPEC.org on 01-Oct-1996