SPECfp95

Hewlett-Packard

HP 9000 Model J200

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

SPECfp95	6.81
SPECfp_base95	6.59

Benchmark # and Name Reference Time Base Run Time Base SPEC Ratio Peak Run Time Peak SPEC Ratio
101.tomcatv 3700 329 11.2 316 11.7
102.swim 8600 495 17.4 445 19.3
103.su2cor 1400 518 2.70 509 2.75
104.hydro2d 2400 658 3.65 655 3.67
107.mgrid 2500 561 4.46 499 5.01
110.applu 2200 513 4.29 510 4.31
125.turb3d 4100 686 5.98 658 6.23
141.apsi 2100 328 6.40 329 6.39
145.fpppp 9600 932 10.3 933 10.3
146.wave5 3000 281 10.7 282 10.6
SPECfp_base95 6.59
SPECfp95 6.81

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	329	11.2	316	11.7
102.swim	8600	495	17.4	445	19.3
103.su2cor	1400	518	2.70	509	2.75
104.hydro2d	2400	658	3.65	655	3.67
107.mgrid	2500	561	4.46	499	5.01
110.applu	2200	513	4.29	510	4.31
125.turb3d	4100	686	5.98	658	6.23
141.apsi	2100	328	6.40	329	6.39
145.fpppp	9600	932	10.3	933	10.3
146.wave5	3000	281	10.7	282	10.6
SPECfp_base95	6.59
	SPECfp95	6.81

Tester Information:

SPEC License #: 3
Tested By: Hewlett-Packard
Test Date: Aug-96
Hardware Avail: Aug-95
Software Avail: Sep-96

SPEC License #:	3
Tested By:	Hewlett-Packard
Test Date:	Aug-96
Hardware Avail:	Aug-95
Software Avail:	Sep-96

Hardware Information:

Model Name: HP 9000 Model J200
CPU: 100 MHz PA-RISC 7200
FPU: Integrated
Number of CPU(s): 1
Primary Cache: 256KBI+256KBD off-chip
Secondary Cache: None
Other Cache: None
Memory: 96MB
Disk Subsystem: 1 Fast/Wide SCSI-2 1.0 GB
Other Hardware: None

Model Name:	HP 9000 Model J200
CPU:	100 MHz PA-RISC 7200
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	256KBI+256KBD off-chip
Secondary Cache:	None
Other Cache:	None
Memory:	96MB
Disk Subsystem:	1 Fast/Wide SCSI-2 1.0 GB
Other Hardware:	None

Software Information:

Operating System: HP-UX B.10.20
Compiler: HP FORTRAN B3906AA B.10.20.01
File System: HP-UX
System State: Multi-user

Operating System:	HP-UX B.10.20
Compiler:	HP FORTRAN B3906AA B.10.20.01
File System:	HP-UX
System State:	Multi-user

Notes:

Base Flags:
All:  +Oall 
Linker Flag:  All: -Wl, -a,archive

Peak Flags:
101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +DC7200 +I/+P 
102: +Oall +Ocache_pad_common +Odataprefetch +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +DC7200 
.    +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P
103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P
104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P
107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 
110: +Oall +Onofastaccess
125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +DC7200
141: +Oall +Onofastaccess +DC7200
145: +Oall
146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit
Linker Flag:  All: -Wl, -a,archive

Note: The +I/+P indicates the use of profile based optimization.

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

[email protected]

Tue Oct 1 14:41:08 PDT 1996

First published at SPEC.org on 01-Oct-1996