This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 18.8 |
---|---|
SPECfp_base95 | 17.0 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 129 | 28.8 | 129 | 28.6 |
102.swim | 8600 | 285 | 30.2 | 173 | 49.6 |
103.su2cor | 1400 | 119 | 11.8 | 117 | 12.0 |
104.hydro2d | 2400 | 236 | 10.2 | 237 | 10.1 |
107.mgrid | 2500 | 176 | 14.2 | 157 | 15.9 |
110.applu | 2200 | 157 | 14.0 | 154 | 14.3 |
125.turb3d | 4100 | 336 | 12.2 | 294 | 13.9 |
141.apsi | 2100 | 191 | 11.0 | 183 | 11.5 |
145.fpppp | 9600 | 339 | 28.3 | 288 | 33.4 |
146.wave5 | 3000 | 115 | 26.1 | 114 | 26.3 |
SPECfp_base95 | 17.0 | ||||
SPECfp95 | 18.8 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Aug-96 |
Hardware Avail: | Sep-96 |
Software Avail: | Sep-96 |
Hardware Information:
Model Name: | HP 9000 Model K450 |
---|---|
CPU: | 160 MHz PA-RISC 8000 |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 1MBI+1MBD off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 2GB |
Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B3906AA B.10.20.01 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
Base Flags: All: +Oall +Odataprefetch Linker Flag: All: -Wl,-aarchive Peak Flags: 101: +O3 +Odataprefetch +Oloop_unroll +Onolimit +Oregionsched +Ovectorize 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 103: +O2 +Odataprefetch +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I +P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl,-aarchive The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Wed Sep 25 17:27:03 PDT 1996First published at SPEC.org on 17-Sep-1996