This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 9.11 |
---|---|
SPECfp_base95 | 8.74 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 271 | 13.6 | 258 | 14.4 |
102.swim | 8600 | 409 | 21.0 | 369 | 23.3 |
103.su2cor | 1400 | 294 | 4.76 | 304 | 4.60 |
104.hydro2d | 2400 | 514 | 4.67 | 501 | 4.79 |
107.mgrid | 2500 | 423 | 5.91 | 344 | 7.27 |
110.applu | 2200 | 414 | 5.31 | 412 | 5.34 |
125.turb3d | 4100 | 567 | 7.24 | 543 | 7.55 |
141.apsi | 2100 | 218 | 9.65 | 217 | 9.70 |
145.fpppp | 9600 | 777 | 12.4 | 777 | 12.4 |
146.wave5 | 3000 | 198 | 15.1 | 198 | 15.2 |
SPECfp_base95 | 8.74 | ||||
SPECfp95 | 9.11 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Aug-96 |
Hardware Avail: | Feb-96 |
Software Avail: | Sep-96 |
Hardware Information:
Model Name: | HP 9000 Model K420 |
---|---|
CPU: | 120 MHz PA-RISC 7200 |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 1MBI+1MBD off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B3906AA B.10.20.01 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
Base Flags: All: +Oall Linker Flag: All: -Wl, -a,archive Peak Flags: 101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +DC7200 +I/+P 102: +Oall +Ocache_pad_common +Odataprefetch +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +DC7200 +I/+P +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P 103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P 104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P 107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 110: +Oall +Onofastaccess 125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +DC7200 141: +Oall +Onofastaccess +DC7200 145: +Oall 146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl, -a,archive Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Wed Sep 25 17:26:46 PDT 1996First published at SPEC.org on 17-Sep-1996