This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 182 |
|---|---|
| SPECfp_rate_base95 | 165 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 1 | 122 | 274 | 1 | 122 | 273 |
| 102.swim | 1 | 284 | 272 | 1 | 162 | 479 |
| 103.su2cor | 1 | 109 | 116 | 1 | 110 | 115 |
| 104.hydro2d | 1 | 227 | 95.2 | 1 | 220 | 98.2 |
| 107.mgrid | 1 | 162 | 139 | 1 | 145 | 156 |
| 110.applu | 1 | 145 | 137 | 1 | 146 | 135 |
| 125.turb3d | 1 | 317 | 117 | 1 | 269 | 137 |
| 141.apsi | 1 | 171 | 110 | 1 | 171 | 111 |
| 145.fpppp | 1 | 299 | 289 | 1 | 256 | 337 |
| 146.wave5 | 1 | 106 | 255 | 1 | 108 | 250 |
| SPECfp_rate_base95 | 165 | |||||
| SPECfp_rate95 | 182 | |||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Cupertino, CA |
| Test Date: | Mar-96 |
| Hardware Avail: | Jun-96 |
| Software Avail: | Sep-96 |
Hardware Information:
| Model Name: | HP 9000 Model K460EG |
|---|---|
| CPU: | 180 MHz PA-RISC 8000 |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 1MBI+1MBD off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 512MB |
| Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
| Other Hardware: | Ethernet |
Software Information:
| Operating System: | HP-UX B.10.20 IC8 |
|---|---|
| Compiler: | f77 B3906AA B.10.00.01.B5 |
| File System: | HP-UX |
| System State: | Single-user |
Notes:
Portability Flags: none Library Flags (base & peak) all benchmarks: -Wl, -aarchive Base: +Oall +Odataprefetch Peak Flags: 101: +O3 +Odataprefetch +Oloop_unroll +Onolimit +Oregionsched +Ovectorize 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 103: +O2 +Odataprefetch +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I/+P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Jun 25 9:17:05 PDT 1996First published at SPEC.org on 25-Jun-1996