This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECint95 | 2.18 |
---|---|
SPECint_base95 | 2.18 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
099.go | 4600 | 1367 | 3.37 | 1367 | 3.37 |
124.m88ksim | 1900 | 894 | 2.13 | 894 | 2.13 |
126.gcc | 1700 | 717 | 2.37 | 717 | 2.37 |
129.compress | 1800 | 1038 | 1.73 | 1038 | 1.73 |
130.li | 1900 | 865 | 2.20 | 865 | 2.20 |
132.ijpeg | 2400 | 1285 | 1.87 | 1285 | 1.87 |
134.perl | 1900 | 1003 | 1.89 | 1003 | 1.89 |
147.vortex | 2700 | 1226 | 2.20 | 1226 | 2.20 |
SPECint_base95 | 2.18 | ||||
SPECint95 | 2.18 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Nov-95 |
Hardware Avail: | Jan-96 |
Software Avail: | Aug-95 |
Hardware Information:
Model Name: | HP 9000 Model D200 |
---|---|
CPU: | 75 MHz PA-RISC 7100LC |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 256KB I+D off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 7 Fast/Wide SCSI-2 2.0 GB |
Other Hardware: | Ethernet |
Software Information:
Operating System: | HP-UX B.10.01 |
---|---|
Compiler: | FORTRAN B3906AA B.10.00.01.00 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
PORTABILITY FLAGS: All: -Ae 126: -Ae -DUSG BASE FLAGS: All: +Oall +Onoregionsched +DA811 +P PEAK FLAGS: Same as BASE FLAGS. Note: The +P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Feb 27 2:05:11 PST 1996First published at SPEC.org on 20-Feb-1996