This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECint95 | 25.3 |
---|---|
SPECint_base95 | 23.5 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
099.go | 4600 | 166 | 27.8 | 161 | 28.7 |
124.m88ksim | 1900 | 71.7 | 26.5 | 70 | 27.2 |
126.gcc | 1700 | 73.5 | 23.1 | 72 | 23.5 |
129.compress | 1800 | 80.6 | 22.3 | 72 | 25.0 |
130.li | 1900 | 84.5 | 22.5 | 78 | 24.5 |
132.ijpeg | 2400 | 91.3 | 26.3 | 94 | 25.6 |
134.perl | 1900 | 107 | 17.7 | 80 | 23.7 |
147.vortex | 2700 | 116 | 23.4 | 110 | 24.6 |
SPECint_base95 | 23.5 | ||||
SPECint95 | 25.3 |
Tester Information:
SPEC License #: | 11 |
---|---|
Tested By: | IBM, Austin, TX |
Test Date: | Jan-2000 |
Hardware Avail: | Feb-2000 |
Software Avail: | Feb-2000 |
Hardware Information:
Model Name: | RS/6000 44P-170 (400 MHz) |
---|---|
CPU: | 400 MHz PowerPC-II |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 32KB I + 64KB D (on chip) |
Secondary Cache: | 4MB unified (off chip) |
Other Cache: | None |
Memory: | 1GB |
Disk Subsystem: | 2x9.1GB IBM Fast/Wide SCSI 7200 RPM |
Other Hardware: | None |
Software Information:
Operating System: | AIX 4.3.3 |
---|---|
Compiler: | IBM C/C++ 3.6.4.0 |
memdbg 4.4.0.1 | |
FDPR | |
File System: | AIX/JFS |
System State: | Multi-user |
Notes:
Compatibility Flags: gcc -ma; perl -DI_TIME -DI_SYS_TIME Base: -O4 -Q=500 -qpdf1/pdf2 -lhmu go: -O -qarch=pwr3 -Q=500 -qansialias -qdatalocal -qassert=addr -qcompact -bnso -bI:/lib/syscalls.exp m88: -O3 -qarch=ppc -qipa=noobject -Q=500 -qansialias -qpdf1/pdf2 gcc: -O -qarch=ppc -qdatalocal -qassert=addr -qinlglue -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp comp: -O -qarch=ppc -qipa=level=2:noobject -qdatalocal -Q=200 -qassert=allp -qunroll=5 li: -O4 -qipa=noobject -qlibansi -qpdf1/pdf2; fdpr -R3 ijpeg: -O4 -qipa=noobject -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp perl: -O4 -qipa=noobject -Q=200 -qinlglue -Dsetjmp=_setjmp -Dlongjmp=_longjmp -qansialias -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp /usr/ccs/lib/bmalloc.o vort: -O4 -qipa=level=2:noobject -Q=500 -qpdf1/pdf2 -lhm -lhu; fdpr -R2
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Feb 15 16:40:11 2000First published at SPEC.org on 15-Feb-2000