SPECfp95

Sun Microsystems

Ultra 60 Model 2450

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	91.6	40.4	83	44.6
102.swim	8600	120	71.8	103	83.8
103.su2cor	1400	57.3	24.4	46	30.4
104.hydro2d	2400	90.6	26.5	83	29.1
107.mgrid	2500	58.6	42.6	41	60.9
110.applu	2200	136	16.2	133	16.5
125.turb3d	4100	225	18.2	186	22.0
141.apsi	2100	84.7	24.8	62	33.9
145.fpppp	9600	356	26.9	247	38.9
146.wave5	3000	98.0	30.6	98	30.5
SPECfp_base95			29.4
		SPECfp95			35.2

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Dec-1999
Hardware Avail:	May-1999
Software Avail:	May-1999

Hardware Information:

Model Name:	Ultra 60 Model 2450
CPU:	450 MHz UltraSPARC-II
FPU:	Integrated
Number of CPU(s):	2
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	4MB(I+D) off chip
Other Cache:	None
Memory:	512MB
Disk Subsystem:	2 x 9.1GB (7200 RPM)
Other Hardware:	Fast Ethernet
	System clock frequency: 112.5 MHz

Software Information:

Operating System:	Solaris 7 SU2 (64-bit)
Compiler:	Sun Workshop FORTRAN 77 5.0
File System:	UFS
System State:	Single User
Kernel Extensions:

Notes:

P1= -xprofile=collect:`pwd`/../feedback
P2= -xprofile=use:`pwd`/../feedback
BCOPY= -Qoption iropt -O4+bcopy; INV = -Qoption iropt -O4+invccexp; BMR = -Qoption iropt -O4+bmerge
Baseline: -fast -xarch=v8plusa -xparallel
Baseline: PASS1= ${P1}; PASS2= ${P2};
101.tomcatv: -fast -xarch=v8plusa -s -xpad=local:23 -xprefetch -xparallel -xreduction -Qoption iropt -O4+data_access
102.swim:    -fast -xarch=v8plusa -s -xpad=common:15 -xprefetch  -xparallel
103.su2cor:  -fast -xarch=v8plusa -s -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2  ${BCOPY}  -xparallel -xreduction
103.su2cor:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2};  EXTRA_LIBS= -lmvec
104.hydro2d: -fast -xarch=v8plusa -s -xprefetch -Qoption iropt -O4+pde -fsimple=2  ${BMR} -xparallel
104.hydro2d:  PASS1= ${P1}; PASS2= ${P2};
107.mgrid: -fast -xarch=v8plusa -fsimple=2 -xprefetch -xparallel
110.applu: -fast -xarch=v8plusa -s -Qoption iropt -O4+scalarrep+ddint+perfect+loop_dist+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr -xparallel
125.turb3d:  -fast -xarch=v8plusa -s -stackvar -xpad -fsimple=2 ${INV}
125.turb3d:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2};
141.apsi:    -fast -xarch=v8plusa -s -xchip=ultra2  -fsimple=2 -xvector -stackvar  -Qoption iropt -Si36  ${BMR} ${INV} 
141.apsi (cont):    -Qoption iropt -O4+algassoc
141.apsi:    PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2};
145.fpppp:   -fast -xarch=v8plusa -s -xO5 -xsafe=mem -fsimple=2 -nodepend -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1
145.fpppp:   PASS1= ${P1}; PASS2= ${P2};
146.wave5:   -fast -xarch=v8plusa  -s -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}  -xparallel
Config file: ultra60fpmp.cfg

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 01-Feb-2000