SPECvirt_sc2013 Result: Hewlett-Packard Company

SPECvirt_sc2013 Result
Copyright © 2010-2015 Standard Performance Evaluation Corporation

Hewlett-Packard Company: ProLiant DL380p Gen8
VMware Inc.: ESXi 5.1

SPECvirt_sc2013 472.3 @ 27 VMs

Tested By:

Hewlett-Packard Company

SPEC License #:

Test Date:

Apr-2013

Performance Section
Performance Summary
Performance Details
Validation Errors

SUT Configuration Section
Physical Configuration
Virtual Configuration

Power Section

N/A

Notes Section
Physical System Notes
Virtualization SW Notes
Hosted VM Notes

Performance Summary:

Performance
Run #	Tile #	Pct Load	Application Server	Web Server	Mail Server	Batch Server	Per-Tile Score	Overall Score
1	1	100%	165.17	179.50	127.26	PASSED	94.37	472.3
	2	100%	165.93	179.60	127.17	PASSED	94.52
	3	100%	165.46	179.63	127.13	PASSED	94.42
	4	100%	164.37	179.51	127.26	PASSED	94.22
	5	100%	167.52	179.58	127.19	PASSED	94.82

Quality Of Service (QOS)
Run #	Tile #	Pct Load	Application Server	Web Server	Mail Server	Batch Server	Per-Tile Score	Overall Score
1	1	100%	0.96	1.00	1.00	1.00	0.99	99.25%
	2	100%	0.96	1.00	1.00	1.00	0.99
	3	100%	0.97	1.00	1.00	1.00	0.99
	4	100%	0.96	1.00	1.00	1.00	0.99
	5	100%	1.00	1.00	1.00	1.00	1.00

Validation Errors:

No Validation Errors Found

Physical Configuration:

System Under Test (SUT)
Virt. Vendor/Product	VMware Inc. ESXi 5.1
# of SUTs	1
Server Vendor	Hewlett-Packard Company
Server Model	ProLiant DL380p Gen8
Processor	Intel Xeon E5-2690
Processor Speed (MHz)	2900
Processor Cores	16 cores, 2 chips, 8 cores/chip, 2 threads/core
Primary Cache	32 KB I + 32 KB D on chip per core
Secondary Cache	256 KB I+D on chip per core
Other Cache	20 MB I+D on chip per chip
Memory	256 GB (16 x 16 GB PC3L-12600R at 1600 MHz)
Operating System	VMware ESXi 5.1
File System	VMFS 5
Other Hardware	N/A
Other Software	N/A

SUT Storage
Storage Controllers	1 x SmartArray P420i onboard 1 x SmartArray P420i onboard 1 x SmartArray P421 dual-port
Storage Enclosure	1 x Storageworks D2700
Disk Description	2 x 300GB 6Gb SCSI 15KRPM 6 x 400GB MLC SSD SCSI 8 x 400GB MLC SSD SCSI
RAID Level	RAID 1+0 RAID 1+0 RAID 5
UPS Required?	No

SUT Network
Network Adapters	1 x HP Ethernet 10GbE NC523SFP 2-port Adapter 1 x HP Ethernet 1Gb 4-port 331FLR Adapter
SUT Ports Total	2 4
SUT Ports Used	2 1
Network Type	10GSFP+ Cu 1000BASE-T
Network Speed	10 Gb/s 1 Gb/s

Clients
Model	ProLiant DL360 G7
# of Clients	1
Processor	Intel Xeon X5670
Processor Speed (MHz)	2933
# Processors	2
Memory	96 GB SDRAM
Network Controller	1 x HP NC523SFP 10GbE dual-port
Operating System	Physical Client: ESXi 4.1 U2 Client VMs: Red Hat Enterprise Linux Server 6.1 (kernel 2.6.32-131.el6.x86_64)
JVM Version	Oracle Java HotSpot(TM) 64-Bit Server VM (build 1.7.0_15-b03)
Other Hardware	N/A
Other Software	N/A

Availability Dates
SUT Hardware	Apr-2012
Virt. Software	Sep-2012
Other Components	N/A

Virtual Configuration:

Web Server

VM Configuration Details
# VCPUS	4
VCPU Speed (MHz)	2900
Memory (MB)	25600
# VNICs	1
VNIC Description	1 x ixgbevf
Storage Description	1 x virtual disk
Virtual Disk Size (MB)	24576
Datastore Size (MB)	0
VM OS	Red Hat Enterprise Linux Server 6.4 (kernel 2.6.32-358.el6.x86_64)
VM OS Availability	Feb-2013

Web Server Configuration Details
Web Server Vendor	Red Hat Inc.
Web Server Name/Version	Apache 2.2.15
Availability Date	Feb-2013
Script Vendor	Red Hat Inc.
Script Name/Version	PHP 5.3.3
Script Availability Date	Jun-2012
JVM Version	Oracle Java HotSpot(TM) 64-Bit Server VM (build 1.7.0_15-b03)
Other Software	Alternative PHP Cache APC 3.1.19 Smarty Template Engine 2.6.26

Application Server

VM Configuration Details
# VCPUS	4
VCPU Speed (MHz)	2900
Memory (MB)	6144
# VNICs	1
VNIC Description	1 x ixgbevf
Storage Description	1 x virtual disk
Virtual Disk Size (MB)	16384
Datastore Size (MB)	0
VM OS	Red Hat Enterprise Linux Server 6.4 (kernel 2.6.32-358.el6.x86_64)
VM OS Availability	Feb-2013

App Server Configuration Details
Application Server Vendor	Oracle Corporation
App. Server Name/Version	Glassfish Server Open Source Edition 3.1.2.2
Availability Date	Jul-2012
Emulator Vendor	Apache Software Foundation
Emulator Name/Version	Apache Tomcat 6.0.36
Emulator Availability Date	Oct-2012
JVM Description	Oracle Corporation Oracle Java HotSpot(TM) 64-Bit Server VM (build 1.7.0_15-b03)
JVM Availability	Feb-2013
Other Software	N/A

Mail Server

VM Configuration Details
# VCPUS	2
VCPU Speed (MHz)	2900
Memory (MB)	2048
# VNICs	1
VNIC Description	1 x ixgbevf
Storage Description	1 x virtual disk
Virtual Disk Size (MB)	32768
Datastore Size (MB)	0
VM OS	Red Hat Enterprise Linux Server 6.4 (kernel 2.6.32-358.el6.x86_64)
VM OS Availability	Feb-2013

Mail Server Configuration Details
Mail Server Vendor	Dovecot.org
Mail Server Name/Version	Dovecot 2.1.15
Availability Date	Feb-2013
JVM Version	Oracle Java HotSpot(TM) 64-Bit Server VM (build 1.7.0_15-b03)
Other Software	N/A

Database Server

VM Configuration Details
# VCPUS	8
VCPU Speed (MHz)	2900
Memory (MB)	20480
# VNICs	1
VNIC Description	1 x ixgbevf
Storage Description	2 x virtual disks
Virtual Disk Size (MB)	16384
Datastore Size (MB)	40960
VM OS	Red Hat Enterprise Linux Server 6.4 (kernel 2.6.32-358.el6.x86_64)
VM OS Availability	Feb-2013

Database Configuration Details
Database Vendor	PostgreSQL
Database Name/Version	PostgreSQL 9.2.3
Availability Date	Feb-2013
JVM Version	Oracle Java HotSpot(TM) 64-Bit Server VM (build 1.7.0_15-b03)
Other Software	N/A

Infraserver

VM Configuration Details
# VCPUS	2
VCPU Speed (MHz)	2900
Memory (MB)	2048
# VNICs	1
VNIC Description	1 x ixgbevf
Storage Description	1 x virtual disk
Virtual Disk Size (MB)	51200
Datastore Size (MB)	0
VM OS	Red Hat Enterprise Linux Server 6.4 (kernel 2.6.32-358.el6.x86_64)
VM OS Availability	Feb-2013

Infraserver Configuration Details
Web Server Vendor	Red Hat Inc.
Web Server Name/Version	Apache 2.2.15
Availability Date	Jun-2012
Script Vendor	fastcgi.com
Script Name/Version	FastCGI 2.4.6
Script Availability Date	Nov-2007
JVM Version	Oracle Java HotSpot(TM) 64-Bit Server VM (build 1.7.0_15-b03)
Other Software	N/A

Batch Server

VM Configuration Details
# VCPUS	2
VCPU Speed (MHz)	2900
Memory (MB)	2048
# VNICs	1
VNIC Description	1 x ixgbevf
Storage Description	1 x virtual disk
Virtual Disk Size (MB)	16384
Datastore Size (MB)	0
VM OS	Red Hat Enterprise Linux Server 6.4 (kernel 2.6.32-358.el6.x86_64)
VM OS Availability	Feb-2013

Batch Server Configuration Details
JVM Version	Oracle Java HotSpot(TM) 64-Bit Server VM (build 1.7.0_15-b03)
C Compiler Version	gcc 4.4.6-4
Optimization Flags	-O2
Other Software	N/A

Notes:

Physical System Notes

BIOS settings used:
Power Profile set to Maximum Performance
Thermal Configuration set to Maximum Cooling

Storage Notes

The SUT's P421 SmartArray controller was connected to 1 x HP D2700 Disk
Enclosure. The enclosure contained 8 x 400 GB SFF MLC SAS SSD drives and
was partitioned into 2 x RAID 5 volumes of 4 drives each. The internal
P420i SmartArray controller was connected to the SUT's internal drive
enclosure which contained 2 x 300 GB 15K SFF 6 Gb SAS drives (Raid 1+0)
and 6 x 400 GB SFF MLC SAS SSD drives (RAID 1+0).
Each volume on the D2700 contained the VMs for two tiles, plus one
database VM. The internal 6-disk SSD volume contained the VMs for one tile.
The internal 2-disk 6 Gb SAS volume was used for the Hypervisor OS.

Virtualization Software Notes

Settings made to drivers via esxcfg-module in ESXi:

For ixgbe driver: max_vfs=20,20 InterruptThrottleRate=0,0

Each NIC port was configured with 20 virtual functions. The VFs for
one port were attached to the webserver and infraserver VMs. The VFs
for the other port were attached to the appserver, dbserver, mailserver,
and batchserver VMs.
All VMs started from the ESX vClient.
Advanced ESX Software settings used:

/adv/Cpu/HaltingIdleMsecPenalty = 0

/adv/Cpu/HTStolenAgeThreshold = 90

/adv/Cpu/HTWholeCoreThreshold = 0

/adv/Irq/RoutingPolicy = 0

/adv/Misc/TimerMaxHardPeriod = 4000

/adv/Net/vmxnetThroughputWeight = 255

/adv/Numa/LTermFairnessInterval = 0

Web Server VM Notes

Boot parameters set: selinux=0, elevator=deadline audit=0 cgroup_disable=memory
SELINUX=disabled was set in /etc/selinux/config.
Virtual NIC used ixgbevf driver.
tuned virtual-guest profile applied to VM
VM setting Memory shares was set to 'high' via vConsole
Following items were added to /etc/sysctl.conf:

net.ipv4.tcp_timestamps = 0

net.ipv4.tcp_max_tw_buckets = 1500000

net.ipv4.tcp_rmem = 1048576 1048576 41943040

net.ipv4.tcp_wmem = 1048576 1048576 41943040

net.ipv4.tcp_mem = 1048576 1048576 41943040

net.ipv4.tcp_window_scaling = 0

net.ipv4.tcp_tso_win_divisor = 8

net.core.rmem_max = 41943040

net.core.wmem_max = 41943040

net.core.rmem_default = 1048576

net.core.wmem_default = 1048576

net.core.optmem_max = 41943040

net.core.netdev_max_backlog = 81920

net.core.somaxconn = 81920

net.ipv4.tcp_max_syn_backlog = 8192

net.ipv4.conf.all.arp_filter=1

net.ipv4.ip_local_port_range = 10000 65000

fs.file-max = 500000

vm.min_free_kbytes = 65536

net.ipv4.tcp_tw_reuse=1

vm.swappiness=0

The following items were added to /etc/bashrc:

ulimit -n 500000 > /dev/null 2>&1

ulimit -u unlimited

Add line in httpd.conf to 'Include conf.d/ssl.conf'
Change values in conf/httpd.conf:

Timeout 20

KeepAlive On

MaxKeepAliveRequests 0

KeepAliveTimeout 150

ServerName webserver

IfModule prefork.c

StartServers 4400

MinSpareServers 50

MaxSpareServers 100

ServerLimit 8000

MaxClients 8000

MaxRequestsPerChild 32000

LoadModule php5_module modules/libphp5.so

/IfModule

IfModule worker.c

StartServers 2

MaxClients 150

MinSpareThreads 25

MaxSpareThreads 75

ThreadsPerChild 25

MaxRequestsPerChild 0

/IfModule

CustomLog logs/access_log common

AddHandler php5-script .php

AddType text/html .php

DirectoryIndex index.php

Application Server VM Notes

Boot parameters set: selinux=0, elevator=deadline audit=0 cgroup_disable=memory
SELINUX=disabled was set in /etc/selinux/config.
Virtual NIC used ixgbevf driver
tuned virtual-guest profile applied to VM
VM setting CPU shares was set to 'High' via vConsole
The following lines were added to /etc/sysctl.conf:

fs.file-max = 500000

net.core.optmem_max = 1000000

net.core.rmem_default = 1000000

net.core.rmem_max = 1000000

net.core.wmem_default = 1000000

net.core.wmem_max = 1000000

net.core.somaxconn = 8192

net.ipv4.tcp_max_tw_buckets = 500000

net.ipv4.tcp_mem = 10000000 10000000 10000000

net.ipv4.tcp_rmem = 10000000 10000000 10000000

net.ipv4.tcp_wmem = 10000000 10000000 10000000

Huge pages were mounted by using the following lines in /etc/rc.local:

echo 896 > /proc/sys/vm/nr_hugepages

echo 500 > /proc/sys/vm/hugetlb_shm_group

mkdir /dev/hugepages

mount -t hugetlbfs hugetlbfs /dev/hugepages

The following lines were added to /etc/security/limits.conf:

soft memlock 3072000

hard memlock 3072000

soft nofile 130172

hard nofile 130172

soft nproc 130172

hard nproc 130172

The following items were added to /etc/bashrc:

ulimit -n 500000 > /dev/null 2>&1

ulimit -u unlimited

The following lines were added to /opt/glassfish/domains/spec2004-1/domain.xml:

To jdbc-connection-pool line parameter 'max-pool-size = 256' was set

To request-processing line parameter 'initial-thread-count = 90' was set

To ejb-container line, parameter 'max-pool-size=256' was set

To mdb-container line, parameter 'max-pool-size = 256' was set

jvm-option '-XX:+AggressiveHeap' was set

jvm-option '-Xmn1024m' was set

jvm-option '-Xmx3000m' was set

jvm-option '-Xms3000m' was set

jvm-option '-XX:PermSize=256m' was set

jvm-option '-XX:MaxPermSize=384m' was set

jvm-option '-Xss256k' was set

jvm-option '-XX:+DisableExplicitGC' was set

jvm-option '-XX:+UseParallelOldGC' was set

jvm-option '-XX:+UseLargePages' was set

jvm-option '-XX:LargePageSizeInBytes=2m' was set

jvm-option '-XX:CompileThreshold=1000' was set

jvm-option '-XX:+AggressiveOpts' was set

jvm-option '-XX:+UseCompressedOops' was set

jvm-option '-XX:+UseFastAccessorMethods' was set

jvm-option '-XX:+UseStringCache' was set

jvm-option '-XX:NewRatio=2' was set

jvm-option '-XX:ParallelGCThreads=4' was set

jvm-option '-XX:-UseBiasedLocking' was set

root file-system options: barrier=0

Mail Server VM Notes

Boot parameters set: selinux=0, elevator=deadline audit=0 cgroup_disable=memory
SELINUX=disabled was set in /etc/selinux/config.
Virtual NIC used ixgbevf driver
tuned virtual-guest profile applied to VM
VM setting CPU shares was set to '450' via vConsole
The following lines were added to /etc/sysctl.conf:

fs.file-max = 500000

net.core.optmem_max = 1000000

net.core.rmem_default = 1000000

net.core.rmem_max = 1000000

net.core.wmem_default = 1000000

net.core.wmem_max = 1000000

net.core.somaxconn = 8192

net.ipv4.tcp_max_tw_buckets = 500000

net.ipv4.tcp_mem = 10000000 10000000 10000000

net.ipv4.tcp_rmem = 10000000 10000000 10000000

net.ipv4.tcp_wmem = 10000000 10000000 10000000

net.ipv4.ip_local_port_range = 4096 65535

The following items were added to /etc/bashrc:

ulimit -n 100000 > /dev/null 2>&1

ulimit -u unlimited

Contents of dovecot.conf file:

base_dir = /var/run/dovecot/

disable_plaintext_auth = no

listen = *, ::

log_path = /var/log/dovecot

mail_debug = no

mail_location = dbox:/mailstore/dovecot/maildir/%u

mdbox_rotate_size = 2048

passdb {

args = /etc/passwd.dovecot

driver = passwd-file

}

protocols = imap

service auth {

user = root

}

service imap-login {

inet_listener imap {

port = 143

}

process_min_avail = 10

}

ssl = no

userdb {

driver = passwd

}

protocol lda {

postmaster_address = [email protected]

mail_fsync = optimized

}

root file-system options: barrier=0

Database Server VM Notes

Boot parameters set: selinux=0, elevator=deadline audit=0 cgroup_disable=memory
SELINUX=disabled was set in /etc/selinux/config.
Virtual NIC used ixgbevf driver
tuned virtual-guest profile applied to VM
The following lines were added to /etc/sysctl.conf:

kernel.shmall = 8294967296

fs.file-max = 500000

net.core.optmem_max = 2000000

net.core.rmem_default = 2000000

net.core.rmem_max = 2000000

net.core.wmem_default = 2000000

net.core.wmem_max = 2000000

net.core.somaxconn = 32384

net.ipv4.tcp_max_tw_buckets = 1000000

net.ipv4.tcp_mem = 20000000 20000000 20000000

net.ipv4.tcp_rmem = 20000000 20000000 20000000

net.ipv4.tcp_wmem = 20000000 20000000 20000000

net.ipv4.ip_local_port_range = 4096 65535

net.ipv4.ip_local_port_range = 4096 65535

net.ipv4.conf.default.arp_filter = 1

net.ipv4.conf.all.arp_filter = 1

The following items were added to /etc/bashrc:

ulimit -n 500000 > /dev/null 2>&1

ulimit -u unlimited

The following items were added to /etc/security/limits.conf:

soft nproc 578528

hard nproc 578528

soft memlock 33554432

hard memlock 33554432

Database tuning options in /var/lib/pgsql/9.2/data/postgresql.conf

synchronous_commit = off

wal_sync_method = open_datasync

bgwriter_delay = 200ms

listen_addresses = '*'

commit_siblings = 3

ssl = off

full_page_writes = off

autovacuum = off

autovacuum_naptime = 6h

debug_assertions = false

log_rotation_size = 16MB

log_destination = syslog

logging_collector = off

log_truncate_on_rotation = off

log_rotation_age = 0

log_rotation_size = 0

track_activities = off

track_counts = off

default_statistics_target = 100

shared_buffers=7000MB

max_connections = 2000

max_prepared_transactions = 1000

work_mem=200MB

maintenance_work_mem = 1025MB

fsync = on

commit_delay = 10

checkpoint_segments = 256

checkpoint_timeout = 300

random_page_cost = 1.5

effective_cache_size = 40GB

temp_buffers = 2000

vacuum_cost_delay = 50

bgwriter_lru_maxpages=100

full_page_writes = off

wal_buffers = 2500

checkpoint_warning = 99

cpu_tuple_cost = 0.001

cpu_index_tuple_cost = 0.0005

cpu_operator_cost = 0.00025

log_min_duration_statement = 1500

Infraserver VM Notes

Boot parameters set: selinux=0, elevator=deadline audit=0 cgroup_disable=memory
SELINUX=disabled was set in /etc/selinux/config.
tuned virtual-guest profile applied to VM
Virtual NIC used ixgbevf driver
The following lines were added to /etc/sysctl.conf:

kernel.shmall = 8294967296

net.ipv4.tcp_fin_timeout = 60

net.ipv4.tcp_syn_retries = 4

net.ipv4.tcp_retries2 = 7

net.ipv4.tcp_keepalive_time = 120

net.ipv4.tcp_keepalive_intvl = 30

net.ipv4.tcp_timestamps = 0

net.ipv4.tcp_max_tw_buckets = 1500000

net.ipv4.tcp_rmem = 1048576 1048576 41943040

net.ipv4.tcp_wmem = 1048576 1048576 41943040

net.ipv4.tcp_mem = 1048576 1048576 41943040

net.ipv4.tcp_window_scaling = 0

net.ipv4.tcp_tso_win_divisor = 8

net.core.rmem_max = 41943040

net.core.wmem_max = 41943040

net.core.rmem_default = 1048576

net.core.wmem_default = 1048576

net.core.optmem_max = 41943040

net.core.netdev_max_backlog = 81920

net.core.somaxconn = 81920

net.ipv4.tcp_max_syn_backlog = 8192

net.ipv4.conf.all.arp_filter=1

net.ipv4.ip_local_port_range = 10000 65000

fs.file-max = 500000

vm.min_free_kbytes = 65536

net.ipv4.tcp_tw_reuse=1

The following items were added to /etc/bashrc:

ulimit -n 100000 > /dev/null 2>&1

ulimit -u unlimited

root file-system options: rw,noatime,data=writeback

Batch Server VM Notes

Boot parameters set: selinux=0, elevator=deadline audit=0 cgroup_disable=memory
SELINUX=disabled was set in /etc/selinux/config.
VM setting CPU shares was set to '270' via vConsole
VM setting Memory shares was set to 'low' via vConsole
Virtual NIC used ixgbevf driver
tuned virtual-guest profile applied to VM
The following lines were added to /etc/sysctl.conf:

kernel.shmall = 8294967296

fs.file-max = 500000

net.core.optmem_max = 1000000

net.core.rmem_default = 1000000

net.core.rmem_max = 1000000

net.core.wmem_default = 1000000

net.core.wmem_max = 1000000

net.core.somaxconn = 8192

net.ipv4.tcp_max_tw_buckets = 500000

net.ipv4.tcp_mem = 10000000 10000000 10000000

net.ipv4.tcp_rmem = 10000000 10000000 10000000

net.ipv4.tcp_wmem = 10000000 10000000 10000000

net.ipv4.conf.default.arp_filter = 1

net.ipv4.conf.all.arp_filter = 1

The following items were added to /etc/bashrc:

ulimit -n 100000 > /dev/null 2>&1

ulimit -u unlimited

root file-system options: barrier=0

Client Driver Notes

Each physical client runs 10 virtual clients. Each virtual client uses
3 x vCPU and 12 GB memory. The first virtual client on the first physical
client is dedicated as the prime controller. Two virtual clients were
used for each tile. One virtual client per tile ran the webserver workload
and the other virtual client per tile ran the other workloads. All 5 web
clients are connected to
are connected to the other 10 Gb NIC port.

Power Configuration Notes

PTD[0] was connected to SUT only.
PTD[1] was connected to 1 x D2700 enclosure.

Other Notes

A single HP A5800 Series Switch JC100A 24 (1Gb) + 4 (10Gb)-port switch was used
to connect the client to the SUT.

Performance Details:

Run 1

Tile 1

Application Server
Req. Type	Req/sec	Avg Resp. Time	Max Resp. Time	90th%	Required 90th%
Manufacturing	66.67	1.23	12.10	1.75	5
Dealer	98.50	0.40/0.34/0.56	26.26/28.76/19.72	0.80/0.90/1.00	2/2/2

Web Server
Web Wkload	Req/sec	Good	Tolerable	Fail	Valid. Errors
Support	179.50	1291223	428	777	0

Mail Server
Req. Type	Req/sec	Total Count	Pass Count	Fail Count	Pass Pct
Append	20.41	146967	146967	0	100.00
Fetch	51.88	373518	373518	0	100.00

Batch Server
Req. Type	Interval[0]	Interval[1]
Batch Workload	PASSED within the 900sec time duration	PASSED within the 900sec time duration
Req. Type	Required Percentage	Achieved Percentage
Poll QoS	95.0%	100.0%

Tile 2

Application Server
Req. Type	Req/sec	Avg Resp. Time	Max Resp. Time	90th%	Required 90th%
Manufacturing	66.82	1.16	6.13	1.50	5
Dealer	99.11	0.42/0.35/0.59	32.35/33.01/29.53	0.80/0.90/1.10	2/2/2

Web Server
Web Wkload	Req/sec	Good	Tolerable	Fail	Valid. Errors
Support	179.60	1292919	156	9	0

Mail Server
Req. Type	Req/sec	Total Count	Pass Count	Fail Count	Pass Pct
Append	20.39	146810	146810	0	100.00
Fetch	51.98	374231	374231	0	100.00

Batch Server
Req. Type	Interval[0]	Interval[1]
Batch Workload	PASSED within the 900sec time duration	PASSED within the 900sec time duration
Req. Type	Required Percentage	Achieved Percentage
Poll QoS	95.0%	100.0%

Tile 3

Application Server
Req. Type	Req/sec	Avg Resp. Time	Max Resp. Time	90th%	Required 90th%
Manufacturing	66.75	1.17	8.94	1.50	5
Dealer	98.70	0.35/0.31/0.49	25.28/26.60/20.64	0.50/0.70/0.50	2/2/2

Web Server
Web Wkload	Req/sec	Good	Tolerable	Fail	Valid. Errors
Support	179.63	1293220	66	15	0

Mail Server
Req. Type	Req/sec	Total Count	Pass Count	Fail Count	Pass Pct
Append	20.42	147041	147041	0	100.00
Fetch	51.90	373707	373707	0	100.00

Batch Server
Req. Type	Interval[0]	Interval[1]
Batch Workload	PASSED within the 900sec time duration	PASSED within the 900sec time duration
Req. Type	Required Percentage	Achieved Percentage
Poll QoS	95.0%	100.0%

Tile 4

Application Server
Req. Type	Req/sec	Avg Resp. Time	Max Resp. Time	90th%	Required 90th%
Manufacturing	66.59	1.19	10.57	1.75	5
Dealer	97.78	0.45/0.36/0.63	27.73/26.05/22.21	0.60/0.80/0.70	2/2/2

Web Server
Web Wkload	Req/sec	Good	Tolerable	Fail	Valid. Errors
Support	179.51	1292376	53	9	0

Mail Server
Req. Type	Req/sec	Total Count	Pass Count	Fail Count	Pass Pct
Append	20.59	148267	148267	0	100.00
Fetch	51.83	373140	373140	0	100.00

Batch Server
Req. Type	Interval[0]	Interval[1]
Batch Workload	PASSED within the 900sec time duration	PASSED within the 900sec time duration
Req. Type	Required Percentage	Achieved Percentage
Poll QoS	95.0%	100.0%

Tile 5

Application Server
Req. Type	Req/sec	Avg Resp. Time	Max Resp. Time	90th%	Required 90th%
Manufacturing	67.00	1.04	2.75	1.25	5
Dealer	100.52	0.02/0.05/0.09	2.56/2.29/2.44	0.10/0.20/0.20	2/2/2

Web Server
Web Wkload	Req/sec	Good	Tolerable	Fail	Valid. Errors
Support	179.58	1292914	57	12	0

Mail Server
Req. Type	Req/sec	Total Count	Pass Count	Fail Count	Pass Pct
Append	20.46	147315	147315	0	100.00
Fetch	51.94	373990	373990	0	100.00

Batch Server
Req. Type	Interval[0]	Interval[1]
Batch Workload	PASSED within the 900sec time duration	PASSED within the 900sec time duration
Req. Type	Required Percentage	Achieved Percentage
Poll QoS	95.0%	100.0%

For questions about this result, please contact the submitter: Hewlett-Packard Company