SPECpower_ssj2008 Copyright (C) 2007-2016 Standard Performance Evaluation Corporation Hewlett Packard Enterprise ProLiant DL360 Gen9 SPECpower_ssj2008 = 10,118 overall ssj_ops/watt Test Sponsor: Hewlett Packard Enterprise SPEC License #: 3 Tested By: Hewlett Packard Enterprise Test Location: Houston, TX, USA Test Date: Sep 8, 2015 Publication: Jan 7, 2016 Hardware Availability: Nov-2015 Software Availability: Jun-2013 Test Method: Single Node System Source: Single Supplier System Designation: Server Power Provisioning: Line-powered Benchmark Results Summary Performance | Power | Performance | | to Power | | Ratio Target Load | Actual Load | ssj_ops | Average | | | | Active Power | | | | (W) | ------------- | ------------- | ------------- | ------------- | ------------- 100% | 100.0% | 3,159,419 | 276 | 11,429 90% | 90.2% | 2,851,258 | 248 | 11,485 80% | 79.9% | 2,525,861 | 218 | 11,598 70% | 70.0% | 2,212,076 | 188 | 11,771 60% | 60.0% | 1,894,880 | 162 | 11,725 50% | 50.0% | 1,579,461 | 145 | 10,870 40% | 40.1% | 1,266,259 | 133 | 9,545 30% | 30.1% | 949,976 | 118 | 8,043 20% | 19.9% | 629,838 | 101 | 6,213 10% | 10.0% | 315,004 | 83.7 | 3,765 Active Idle | 0 | 45.0 | 0 sum of ssj_ops / sum of power = | 10,118 System Under Test Set: 'SUT' Set Identifier: SUT Set Description: System Under Test # of Identical Nodes: 1 Comment: SUT HARDWARE Hardware Vendor: Hewlett Packard Enterprise Model: ProLiant DL360 Gen9 Form Factor: 1U CPU Name: Intel Xeon E5-2699 v3 2.30 GHz CPU Characteristics: 18-Core, 2.30 GHz, 45MB L3 Cache CPU Frequency (MHz): 2300 CPU(s) Enabled: 36 cores, 2 chips, 18 cores/chip Hardware Threads: 72 (2 / core) CPU(s) Orderable: 1,2 chips Primary Cache: 32 KB I + 32 KB D on chip per core Secondary Cache: 256 KB I+D on chip per core Tertiary Cache: 45 MB I+D on chip per chip Other Cache: None Memory Amount (GB): 64 # and size of DIMM: 8 x 8182 MB Memory Details: 8 GB 2Rx8 PC4-2133P; slots 1, 4, 9 and 12 populated on each socket Power Supply Quantity and Rating 1 x 800 (W): Power Supply Details: HP 800W Flex Slot Titanium Hot Plug Power Supply Kit (720482-B21) Disk Drive: 1 x 400GB SSD SATA (691842-003) Disk Controller: embedded SATA # and type of Network Interface 1 x HPE Ethernet 1Gb 4-port 331i Adapter Cards (NICs) Installed: NICs Enabled in Firmware / OS / 4/4/1 Connected: Network Speed (Mbit): 1000 Keyboard: None Mouse: None Monitor: None Optical Drives: No Other Hardware: None SOFTWARE Power Management: Enabled (see SUT Notes) Operating System (OS): Microsoft Windows Server Enterprise 2008 R2 SP1 OS Version: Version 6.1 (Build 7601) Filesystem: NTFS JVM Vendor: IBM Corporation JVM Version: IBM J9 VM (build 2.6, JRE 1.7.0 Windows Server 2008 amd64-64 20120322_106209 (JIT enabled, AOT enabled) JVM Command-line Options: -Xmx975m -Xms975m -Xmn825m -Xaggressive -Xcompressedrefs -Xgcpolicy:gencon -XlockReservation -Xnoloa -XtlhPrefetch -Xlp -Xconcurrentlevel0 -Xthr:minimizeusercpu -Xgc:preferredHeapBase=0x80000000 -Xgcthreads2 JVM Affinity: start /NODE [0,1,2,3] /AFFINITY [0x3, 0xc, 0x30, 0xc0, 0x300, 0xc00, 0x3000, 0xc000, 0x3000] JVM Instances: 36 JVM Initial Heap (MB): 975 JVM Maximum Heap (MB): 975 JVM Address Bits: 64 Boot Firmware Version: P89 1.50 07/20/2015 Management Firmware Version: 2.30 pass 22 Jun 25 2015 Workload Version: SSJ 1.2.10 Director Location: Controller Other Software: IBM WebSphere Application Server V8.5.0.0, Microsoft Hotfix for Windows (KB2510206) Boot Firmware Settings System Configuration -> BIOS/Platform Configuration (RBSU) * System Options - USB Options * USB Control - External USB Ports Disabled * System Options - SATA Controller Options * Enable SATA AHCI Support * Power Management * Power Regulator = Dynamic Power Savings Mode * HP Power Profile = Custom * Advanced Power Options * Maximum Memory Bus Frequency = Auto * Intel QPI Link Frequency = Min QPI Speed * Intel DMI Link Frequency = Gen 1 Speed * Dynamic Power Savings Mode Response = Slow * Collaborative Control = Disabled * Redundant Power Supply Mode = Balanced Mode * Performance Options * Intel Turbo Boost Technology = Disabled * ACPI SLIT Preference = Enabled * Advanced Performance Tuning Options * Node Interleaving = Disabled * Intel NIC DMA Channels (IOAT) = Enabled * HW Prefetcher = Disabled * Adjacent Sector Prefetch = Disabled * DCU Streamer Prefetcher = Disabled * DCU IP Prefetcher = Enabled * QPI Snoop Configurations = Cluster on Die * QPI Bandwidth Optimization (RTID) = Balanced * Memory Proximity Reporting for I/O = Enabled * Intel Performance Monitoring Support = Disabled * PCI Device Enabled/Disabled * Embedded: SATA Controller #2 = Disabled * Service Options * Processor Power and Utilization Monitoring = Enabled * Memory Pre-Failure Notification = Disabled * AHS PCI Logging Level = Minimal Logging * Memory Patrol Scrubbing = Disabled * Memory Refresh Rate = 1x Refresh * AHS Network Logging = Disabled Management Firmware Settings See SUT Notes System Under Test Notes * Using the local security settings console, "lock pages in memory" was enabled for the user running the benchmark. * Benchmark started via PSExec * SPECpower_ssj.props input.load_level.number_warehouses set to 72 to detect the full number of available processors on the SUT * Windows Power Options = Balanced * Turn off Display = 1 Minute * Turn off hard disk = 1 Minute * Microsoft Hotfix KB2510206 has been installed due to known problems of the group assignment algorithm which does not create a balanced group assignment. For more information see: http://support.microsoft.com/kb/2510206 Controller System HARDWARE Hardware Vendor: Hewlett-Packard Company Model: ProLiant DL360 G7 CPU Description: Intel Xeon X5670 Memory amount (GB): 64 SOFTWARE Operating System (OS): Windows Server 2012 SP2 - V6.2 9200 JVM Vendor: Oracle Corporation JVM Version: 1.8.0_05-b13 (build 25.5-b02, mixed mode) CCS Version: 1.2.6 Measurement Devices POWER ANALYZER PWR1 Hardware Vendor: Yokogawa Model: WT210 Serial Number: 91GB3024 Connectivity: GPIB via NI GPIB-USB-HS Input Connection: Default Metrology Institute: NIST Accredited by: HP Metrology Calibration Label: 705419 Date of Calibration: 16-Jun-2015 PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS PTDaemon Version: 1.7.1-4db18c59-20150211 Setup Description: SUT Power Supply 1 TEMPERATURE SENSOR TEMP1 Hardware Vendor: Digi International Inc. Model: Watchport/H Driver Version: 5.70.105.0 Connectivity: USB PTDaemon Host System: same as CCS PTDaemon Host OS: same as CCS Setup Description: 5 mm in front of SUT main intake Notes None Aggregate Electrical and Environmental Data Target Load | Average | Minimum | Active | Ambient | Power (W) | Temperature | | (Degrees C) ----------- | ---------- | ------------- 100% | 276 | 21.4 90% | 248 | 21.4 80% | 218 | 21.3 70% | 188 | 21.2 60% | 162 | 21.2 50% | 145 | 21.2 40% | 133 | 21.3 30% | 118 | 21.2 20% | 101 | 21.2 10% | 83.7 | 21.2 Active Idle | 45.0 | 21.1 Line Standard | Minimum | Elevation (m) | Temperature | | (Degrees C) | ------------------------- | --------------- | --------------- 210V / 60 Hz / 1 phase / | 21.1 | 132 2 wires | | See the Power/Temperature Details Report (power_ssj2008-20151215-00708-power.txt) for additional details. Aggregate Performance Data Target Load | Actual Load | ssj_ops | | Target | Actual ----------------- | ----------------- | ----------------- | ----------------- Calibration 1 | | | 2,971,239 Calibration 2 | | | 3,155,191 Calibration 3 | | | 3,165,493 ssj_ops@calibrated=3,160,342 100% | 100.0% | 3,160,342 | 3,159,419 90% | 90.2% | 2,844,308 | 2,851,258 80% | 79.9% | 2,528,273 | 2,525,861 70% | 70.0% | 2,212,239 | 2,212,076 60% | 60.0% | 1,896,205 | 1,894,880 50% | 50.0% | 1,580,171 | 1,579,461 40% | 40.1% | 1,264,137 | 1,266,259 30% | 30.1% | 948,103 | 949,976 20% | 19.9% | 632,068 | 629,838 10% | 10.0% | 316,034 | 315,004 Active Idle | | 0 | 0 See the Host Performance Report (power_ssj2008-20151215-00708.SUT-02.txt) for additional details. Copyright (C) 2007-2016 Standard Performance Evaluation Corporation http://www.spec.org - info@spec.org SPECpower_ssj2008 Reporter Version: [SSJ 1.2.10, May 9, 2012]