# Invocation command line: # /tmp/spec/1.1/bin/runspec --config=/tmp/spec/1.1/config/hypnos-pgi167.cfg --flagsurl=file://bigdata/rz/kroh21/SPEC/OMP2012/run/pgi129_linux_flags.xml --reportable gross # output_root was not used for this run ############################################################################ # Invocation command line: # /tmp/OMP2012-021/bin/runspec --config=ZIH-atlas-pgi-12.9.cfg --flagsurl=/home/molka/OMP2012/pgi129_linux_flags.xml --reportable gross # output_root was not used for this run ############################################################################ ####################################################################### # System Under Test (SUT) Section # If it affects performance, you need to describe it, either # in the pre-defined fields or by adding it to the notes section. # Replace the setting below with the ones that match your # machine. ####################################################################### # System Description hw_model = Supermicro H8QGi+-F hw_memory = 256 GB (32 x 8 GB 2Rx4 PC3-10600R-9, ECC) hw_disk = 250 GB (1 x 250 GB SATA 7200 rpm) hw_vendor = Supermicro # CPU description hw_cpu_name = AMD Opteron 6276 hw_cpu_mhz = 2300 hw_cpu_max_mhz = 3200 hw_cpu_char = AMD Turbo CORE technology up to 3.20 GHz hw_nchips = 4 hw_ncores = 64 hw_ncoresperchip = 16 hw_nthreadspercore = 1 hw_ncpuorder = 2,4 chips hw_fpu = Integrated hw_pcache000 = 512 KB I on chip per chip, hw_pcache001 = 64 KB I shared / 2 cores; hw_pcache002 = 16 KB D on chip per core hw_scache = 16 MB I+D on chip per chip, 2 MB shared / 2 cores hw_tcache = 16 MB I+D on chip per chip, 8 MB shared / 8 cores hw_ocache = None # PSU # Operating system, file system sw_os000 = Ubuntu 14.04 LTS sw_os001 = Kernel 4.4.0-38-generic sw_state = run-level 5 sw_file = ext3 sw_compiler = C/C++/Fortran: Version 17.5 of the PGI Compilers sw_other = None sw_base_ptrsize = 64-bit sw_peak_ptrsize = Not Applicable #availability hw_avail = Nov-2011 sw_avail = May-2017 # Tester description - put your license number here! license_num = 65A prepared_by = tester = HZDR test_sponsor = HZDR ####################################################################### # End of SUT section ####################################################################### ####################################################################### # The header section of the config file. Must appear # before any instances of "default=" # # ext = how the binaries you generated will be identified # tune = specify "base" or "peak" or "all" # threads = number of threads to use # the rest are default values ext = hypnos-pgi tune = base threads = 64 output_format = all table = 1 teeout = no teerunout = yes check_md5 = yes env_vars = yes makeflags = -j 33 strict_rundir_verify=0 sysinfo_program = $[top]/Docs/sysinfo -f # Power and temperature meter configuration #power = no #power_analyzer = 141.30.75.126:8889 #temp_meter = 141.30.75.126:8888 #mean_anyway = 1 ####################################################################### # Compiler selection # CC = how the C Compiler is invoked # CXX = how the C++ Compiler is invoked # FC = how the FORTRAN compiler is invoked default=default=default=default: CC = pgcc CXX = pgc++ FC = pgf90 ONESTEP=no ENV_OMP_NESTED=FALSE ENV_OMP_DYNAMIC=FALSE ENV_MP_BIND=YES ENV_MPSTKZ=64M ENV_OMP_STACKSIZE=64M # Note that SPEC baseline rules require that compiler flags be # "safe". See the SPEC OMP2012 Run Rules for more details on this. # # OPTIMIZE = flags applicable to all compilers # COPTIMIZE = flags applicable to the C compiler # FOPTIMIZE = flags applicable to the Fortran compiler # # See your compiler manual for information on the flags available # for your compiler # # PORTABILITY = Additional C/Fortran flags needed for portability # CPORTABILITY = Additional C flags needed for portability # FPORTABILITY = Additional Fortran flags needed for portability # EXTRA_CFLAGS = Additional flags to use for C compilation # used for per benchmark peak optimization # EXTRA_FFLAGS = Additional flags to use for Fortran compilation # used for per benchmark peak optimization # EXTRA_LIBS = Additional libraries used for compilation # used for per benchmark peak optimization ####################################################################### # General notes (notes0xx) notes_000= Environment: notes_005= OMP_NESTED=FALSE notes_010= OMP_DYNAMIC=FALSE notes_015 = MP_BIND=YES notes_020 = MPSTKZ=64M notes_025 = OMP_STACKSIZE=64M # ####################################################################### # Gross Baseline Optimization # notes1xx are used for listing the baseline tuning description gross=base=default=default: OPTIMIZE = -mp -fast -Mvect=simd:256 -Msmartalloc=huge -mcmodel=medium ####################################################################### # Gross Peak Optimization # notes2xx are used for listing the peak tuning description gross=peak=default=default: OPTIMIZE = -mp -fast -Mvect=simd:256 -Msmartalloc=huge -mcmodel=medium -tp= bulldozer-64 ####################################################################### # Gross Portability # notes8xx are used for listing the portability flags that are needed # to get some of the programs to compile. While SPEC has made efforts # to ensure that programs do not require these types of flags, some # of the programs are advanced enough and the differences between # operating systems great enough that some programs require these. # # For portability flags for benchmarks not listed, duplicate the format # used below. gross=default=default=default: 350.md=default=default=default: FPORTABILITY = -Mfree # The following settings were obtained by running '$[top]/Docs/sysinfo -f' default: notes_plat_sysinfo_000 = Sysinfo program /tmp/spec/1.1/Docs/sysinfo notes_plat_sysinfo_005 = Revision 563 of 2016-06-10 (097295389cf6073d8c3b03fa376740a5) notes_plat_sysinfo_010 = running on laser086 Wed Jul 5 11:59:45 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/omp2012/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : AMD Opteron(TM) Processor 6276 notes_plat_sysinfo_050 = 4 "physical id"s (chips) notes_plat_sysinfo_055 = 64 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 8 notes_plat_sysinfo_080 = siblings : 16 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_095 = physical 2: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_100 = physical 3: cores 0 1 2 3 4 5 6 7 notes_plat_sysinfo_105 = cache size : 2048 KB notes_plat_sysinfo_110 = notes_plat_sysinfo_115 = From /proc/meminfo notes_plat_sysinfo_120 = MemTotal: 264017344 kB notes_plat_sysinfo_125 = HugePages_Total: 0 notes_plat_sysinfo_130 = Hugepagesize: 2048 kB notes_plat_sysinfo_135 = notes_plat_sysinfo_140 = /usr/bin/lsb_release -d notes_plat_sysinfo_145 = Ubuntu 14.04.5 LTS notes_plat_sysinfo_150 = notes_plat_sysinfo_155 = From /etc/*release* /etc/*version* notes_plat_sysinfo_160 = debian_version: jessie/sid notes_plat_sysinfo_165 = os-release: notes_plat_sysinfo_170 = NAME="Ubuntu" notes_plat_sysinfo_175 = VERSION="14.04.5 LTS, Trusty Tahr" notes_plat_sysinfo_180 = ID=ubuntu notes_plat_sysinfo_185 = ID_LIKE=debian notes_plat_sysinfo_190 = PRETTY_NAME="Ubuntu 14.04.5 LTS" notes_plat_sysinfo_195 = VERSION_ID="14.04" notes_plat_sysinfo_200 = HOME_URL="http://www.ubuntu.com/" notes_plat_sysinfo_205 = SUPPORT_URL="http://help.ubuntu.com/" notes_plat_sysinfo_210 = rh-release: Red Hat Enterprise Linux Server release 7.2 (Maipo) notes_plat_sysinfo_215 = notes_plat_sysinfo_220 = uname -a: notes_plat_sysinfo_225 = Linux laser086 4.4.0-38-generic #57~14.04.1-Ubuntu SMP Tue Sep 6 17:20:43 UTC notes_plat_sysinfo_230 = 2016 x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_235 = notes_plat_sysinfo_240 = run-level 5 Jan 5 07:52 notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = SPEC is set to: /tmp/spec/1.1 notes_plat_sysinfo_255 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_260 = /dev/sda1 ext3 37G 8.4G 27G 24% / notes_plat_sysinfo_265 = notes_plat_sysinfo_270 = Cannot run dmidecode; consider saying 'chmod +s /usr/sbin/dmidecode' notes_plat_sysinfo_275 = notes_plat_sysinfo_280 = (End of data from sysinfo program) # hw_cpu_name = AMD Opteron 6276 # hw_disk = 37 GB add more disk info here # hw_memory001 = 251.787 GB fixme: If using DDR3, format is: # hw_memory002 = 'N GB (M x N GB nRxn PCn-nnnnnR-n, ECC)' # hw_nchips = 4 # prepared_by = kroh21 (is never output, only tags rawfile) # sw_file = ext3 # sw_os001 = Ubuntu 14.04.5 LTS # sw_os002 = 4.4.0-38-generic # sw_state = Run level 5 (add definition here) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/omp2012/flags/pgi175_linux_flags.xml