# Invocation command line:
# /store/mackey/specMPI/bin/runspec --ranks 112 --reportable -a validate -o asc,csv,html -n 3 -T base -c default.cfg --define ICCV=16.0.3.210 --define MPI=MPT --define PPN=56 -i mref --define SIZE=medium medium
# output_root was not used for this run
############################################################################
# Invocation command line:
# /store/hfeng/mpi2007-2014-07-09/bin/runspec --ranks 1536 -I --reportable -a validate -n 3 -o asc -i lref -T base -c sgi-linux-x86_64-sgimpi-14.0.3.174-avx2.cfg large
# output_root was not used for this run
############################################################################
####################################################################
#
# defaults
#
####################################################################

flagsurl000= http://www.spec.org/mpi2007/flags/SGI_x86_64_Intel14_flags.20140908.xml

%if !defined(%{ICCV}) || !defined(%{SIZE})
% error must define both SIZE and ICCV
%endif



%if !defined(%{MPI}) || '%{MPI}' eq 'MPT'
    ext=sgimpi.intel.%{ICCV}.avx2.%{SIZE}
%elif '%{MPI}' eq 'INTEL'
%   if %{ICC} == 14
%       if '%{SIZE}' eq 'medium'
            ext=intel-mpi.intel.%{ICCV}.avx2.med
%       elif '%{SIZE}' eq 'large'
            ext=intel-mpi.intel.%{ICCV}.avx2.large
%       else
%           error invalid SIZE '%{SIZE}'
%       endif
%   elif %{ICC} == 16 && '%{SIZE}' eq 'medium'
        ext=intel-mpi.intel.%{ICCV}.msse2
%   elif %{ICC} == 16 && '%{SIZE}' eq 'large'
        ext=intel-mpi.intel.%{ICCV}.avx2
%   else
%       error invalid combination of SIZE and ICC
%   endif
%elif '%{MPI}' eq 'OMPI'
%   if %{ICC} == 14
%       if '%{SIZE}' eq 'medium'
            ext=openmpi.intel.%{ICCV}.avx2.med
%       elif '%{SIZE}' eq 'large'
            ext=openmpi.intel.%{ICCV}.avx2.large
%       else
%           error invalid SIZE '%{SIZE}'
%       endif
%   elif %{ICC} == 16 && '%{SIZE}' eq 'medium'
        ext=openmpi.intel.%{ICCV}.msse2
%   elif %{ICC} == 16 && '%{SIZE}' eq 'large'
        ext=openmpi.intel.%{ICCV}.avx2
%   else
%       error invalid combination of SIZE and ICC
%   endif
%endif

action=validate
tune=base
input=ref
teeout=no
env_vars=1
no_input_handler=null
mean_anyway=1
strict_rundir_verify = 1
makeflags=-j 16

%if '%{MPI}' eq 'INTEL'
FC = mpiifort
CC = mpiicc
CXX = mpiicpc
%elif '%{MPI}' eq 'OMPI'
FC = mpif90
CC = mpicc
CXX = mpic++
%else
FC = ifort
CC = icc
CXX = icpc
%endif


####################################################################
#
# Base flags
#
####################################################################

default=default=default=default:
FOPTIMIZE = -O3 -xCORE-AVX2 -no-prec-div

%if '%{MPI}' eq 'INTEL'
    OPTIMIZE = -O3 -xAVX -no-prec-div -ipo
%else
    COPTIMIZE = -O3 -xCORE-AVX2 -no-prec-div
    CXXOPTIMIZE = -O3 -xCORE-AVX2 -no-prec-div -ansi-alias
    EXTRA_LIBS = -lmpi
%endif

%if %{ICC} == 16 && '%{SIZE}' eq 'medium'
    COPTIMIZE = -O2 -msse2 -no-prec-div
    CXXOPTIMIZE = -O2 -msse2 -no-prec-div
    FOPTIMIZE = -O2 -msse2 -no-prec-div
%endif


default=default=default=default:
use_submit_for_speed=1

%   if !defined(%{MPI}) || '%{MPI}' eq 'MPT'
%       if defined(%{HOSTLIST}) && defined(%{RPH}) && defined(%{SPILLHOST}) && defined(%{SPILL})
%           ifdef %{MPINSIDE}
                submit=MPI_DSM_CPULIST=%{CPULIST} mpirun %{HOSTLIST} %{RPH} MPInside $command : %{SPILLHOST} %{SPILL} MPInside $command
%           else
                submit=MPI_DSM_CPULIST=%{CPULIST} mpirun %{HOSTLIST} %{RPH} $command : %{SPILLHOST} %{SPILL} $command
%           endif
%       else
%           ifdef %{MPINSIDE}
%               ifndef %{PPN}
                    submit=mpiexec_mpt -n $ranks MPInside $command
%               else
                    submit=mpiexec_mpt -ppn %{PPN} -n $ranks MPInside $command
%               endif
%           else
%               ifndef %{PPN}
                    submit=mpiexec_mpt -n $ranks $command
%               else
                    submit=mpiexec_mpt -ppn %{PPN} -n $ranks $command
%               endif
%           endif
%       endif
%   elif '%{MPI}' eq 'INTEL'
%       ifndef %{PPN}
            submit=mpiexec.hydra -machinefile \$PBS_NODEFILE -genv I_MPI_PIN 1 -genv I_MPI_OFA_ADAPTER_NAME mlx5_0 -n $ranks $command
%       else
            submit=mpiexec.hydra -machinefile \$PBS_NODEFILE -ppn %{PPN} -genv I_MPI_PIN 1 -genv I_MPI_OFA_ADAPTER_NAME mlx5_0  -n $ranks $command
%       endif
%   elif '%{MPI}' eq 'OMPI'

%define NOMXM   -mca pml ob1 -mca btl self,sm,openib
%define MXM     -mca pml yalla
%define HCOLL    # on by default
%define NOHCOLL -mca coll_hcoll_enable 0
%define MLX50   -x MXM_RDMA_PORTS=mlx5_0:1 -mca btl_openib_if_include mlx5_0:1
%define KNEM    -mca btl_sm_use_knem 1 -x MXM_SHM_KCOPY_MODE=knem
%define NOKNEM  -mca btl_sm_use_knem 0 -x MXM_SHM_KCOPY_MODE=off
%define UD      -x MXM_TLS=self,shm,ud
%define RC      -x MXM_TLS=self,shm,rc -x MXM_RC_QP_LIMIT=-1
%define DC      -x MXM_TLS=self,shm,dc

        submit=mpirun %{KNEM} %{NOHCOLL} %{MLX50} %{MXM} %{DC} -x LD_LIBRARY_PATH=\$LD_LIBRARY_PATH -np $ranks --hostfile \$PBS_NODEFILE --rankfile %{RANKFILE} $command
%   else
        submit=mpirun -np $ranks $command
%   endif

#mpiexec.hydra -machinefile $PBS_NODEFILE -genv I_MPI_PIN_PROCESSOR_LIST=14-25,0-11 -ppn 24 -genv I_MPI_PIN 1 -genv I_MPI_OFA_ADAPTER_NAME=mlx5_0 -n 3072
#submit=mpiexec_mpt -n $ranks dplace -s1 -c2-5,8-11 $command


####################################################################
#
# Portability flags
#
####################################################################

115.fds4=default=default=default:
#%if '%{MPI}' eq 'MPT' && defined(%{HOSTLIST})
#ENV_MPI_DSM_CPULIST='14-27,0-13:allhosts'
#ENV_MPI_DSM_CPULIST='0-27:allhosts'
#ENV_MPI_DSM_VERBOSE=1
#ENV_MPI_VERBOSE=1

#submit=mpiexec_mpt -v -n $ranks $command
#%endif

121.pop2=default=default=default:
CPORTABILITY = -DSPEC_MPI_CASE_FLAG

127.wrf2=default=default=default:
CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX

130.socorro=default=default=default:
srcalt=nullify_ptrs
FPORTABILITY=-assume nostd_intent_in

104.milc=peak=default=default:
basepeak=yes

107.leslie3d=peak=default=default:
basepeak=yes

113.GemsFDTD=peak=default=default:
ranks=96

115.fds4=peak=default=default:
basepeak=yes
#ranks=696

121.pop2=peak=default=default:
basepeak=yes

122.tachyon=peak=default=default:
basepeak=yes

126.lammps=peak=default=default:
basepeak=yes
#ranks=192

127.wrf2=peak=default=default:
#ranks=744
basepeak=yes

128.GAPgeofem=peak=default=default:
basepeak=yes

129.tera_tf=peak=default=default:
basepeak=yes

129.tera_tf=default=default=default:
%if '%{SIZE}' eq 'medium'
srcalt=add_rank_support
%endif

130.socorro=peak=default=default:
basepeak=yes
#RM_SOURCES=specblas.f90
#EXTRA_LIBS=-lacml -lmpi
#EXTRA_LIBS=-Wl,--start-group -lmkl_intel_lp64 -lmkl_sequential -lmkl_core -Wl,--end-group -lmpi

132.zeusmp2=peak=default=default:
basepeak=yes
#ranks=528

137.lu=peak=default=default:
basepeak=yes
#ranks=504

143.dleslie=default=default=default:
srcalt=integer_overflow
notes_base_143=src.alt used: 143.dleslie->integer_overflow

145.lGemsFDTD=peak=default=default:
#ranks=2048
#ENV_MPI_DSM_CPULIST=2-5,8-11:allhosts

147.l2wrf2=peak=default=default:
#ranks=2048
#ENV_MPI_DSM_CPULIST=2-5,8-11:allhosts





# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
sw_base_ptrsize = 64-bit
sw_peak_ptrsize = 64-bit
sw_other = None
sw_mpi_library = SGI MPT 2.14 Patch 11328
sw_mpi_other = OFED 3.2.2
sw_preprocessors = None
test_sponsor = SGI
license_num = 14
tester = SGI
hw_avail = May-2016
sw_avail = Jun-2016
prepared_by = Mark Mackey <mackey@sgi.com>
system_vendor = SGI
node_fileserver_sw_state = Multi-user, run level 3
node_fileserver_sw_localfile = xfs
node_fileserver_purpose = fileserver
node_fileserver_order = 3
node_fileserver_label = SGI MIS Server
node_fileserver_hw_vendor = SGI
node_fileserver_hw_tcache = 20 MB I+D on chip per chip
node_fileserver_hw_scache = 256 KB I+D on chip per core
node_fileserver_hw_pcache = 32 KB I + 32 KB D on chip per core
node_fileserver_hw_other = None
node_fileserver_hw_ocache = None
node_fileserver_hw_nthreadspercore = 1
node_fileserver_hw_ncpuorder = 1-2 chips
node_fileserver_hw_ncoresperchip = 8
node_fileserver_hw_ncores = 16
node_fileserver_hw_nchips = 2
node_fileserver_hw_memory = 128 GB (12 * 8 GB 2Rx4 PC3-12800R-11, ECC)
node_fileserver_hw_cpu_name = Intel Xeon E5-2670
node_fileserver_hw_cpu_mhz = 1200
node_fileserver_hw_adapter_IB_slot_type = PCIe x8 Gen3
node_fileserver_hw_adapter_IB_ports_used = 2
node_fileserver_hw_adapter_IB_interconnect = InfiniBand
node_fileserver_hw_adapter_IB_firmware = 2.36.5000
node_fileserver_hw_adapter_IB_driver = OFED-3.2.0.1.1
node_fileserver_hw_adapter_IB_data_rate = InfiniBand 4X FDR
node_fileserver_hw_adapter_IB_count = 2
node_fileserver_count = 1
node_compute_sw_state = Multi-user, run level 3
node_compute_sw_sharedfile = NFSv3 IPoIB
node_compute_sw_localfile = NFSv3
node_compute_purpose = compute
node_compute_order = 2
node_compute_label = SGI ICE XA IP-125 CS
node_compute_hw_vendor = SGI
node_compute_hw_tcache = 35 MB I+D on chip per chip
node_compute_hw_scache = 256 KB I+D on chip per core
node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core
node_compute_hw_other = None
node_compute_hw_ocache = None
node_compute_hw_nthreadspercore = 2
node_compute_hw_ncpuorder = 1-2 chips
node_compute_hw_ncoresperchip = 14
node_compute_hw_ncores = 28
node_compute_hw_nchips = 2
node_compute_hw_model = SGI ICE XA (Intel Xeon E5-2690 v4, 2.6 GHz)
node_compute_hw_memory = 128 GB (8 x 16 GB 2Rx4 PC4-2400T-R)
node_compute_hw_disk = None
node_compute_hw_cpu_name = Intel Xeon E5-2690 v4
node_compute_hw_cpu_mhz = 2600
node_compute_hw_adapter_IB_slot_type = PCIe x16 Gen3
node_compute_hw_adapter_IB_ports_used = 1
node_compute_hw_adapter_IB_interconnect = InfiniBand
node_compute_hw_adapter_IB_firmware = 12.14.0114
node_compute_hw_adapter_IB_driver = OFED-3.2.1.5.3
node_compute_hw_adapter_IB_data_rate = InfiniBand 4X EDR
node_compute_hw_adapter_IB_count = 2
node_compute_count = 2
interconnect_IOMPI_purpose = MPI and I/O traffic
interconnect_IOMPI_order = 1
interconnect_IOMPI_label = InfiniBand (MPI and I/O)
interconnect_IOMPI_hw_vendor = Mellanox Technologies and SGI
interconnect_IOMPI_hw_topo = Enhanced Hypercube
interconnect_IOMPI_hw_switch_1_ports = 36
interconnect_IOMPI_hw_switch_1_model = SGI P0002145
interconnect_IOMPI_hw_switch_1_firmware = 11.0350.0394
interconnect_IOMPI_hw_switch_1_data_rate = InfiniBand 4x EDR
interconnect_IOMPI_hw_switch_1_count = 2
interconnect_IOMPI_hw_model = None
notes_000 =Software environment:
notes_005 =  export MPI_REQUEST_MAX=65536
notes_010 =  export MPI_TYPE_MAX=32768
notes_015 =  export MPI_IB_RAILS=2
notes_020 =  export MPI_IB_UPGRADE_SENDS=50
notes_025 =  export MPI_IB_IMM_UPGRADE=false
notes_030 =  export MPI_IB_DCIS=2
notes_035 =  export MPI_CONNECTIONS_THRESHOLD=0
notes_040 =  export MPI_IB_MTU=4096
notes_045 =  ulimit -s unlimited
notes_050 =BIOS settings:
notes_055 =  AMI BIOS version HA012036
notes_060 =  Hyper-Threading Technology enabled
notes_065 =  Intel Turbo Boost Technology enabled (default)
notes_070 =  Transparent Hugepages Enabled
notes_075 =Job Placement:
notes_080 =  Each MPI job was assigned to a topologically compact set
notes_085 =  of nodes using 28 ranks per socket.
notes_090 =Additional notes regarding interconnect:
notes_095 =  The Infiniband network consists of two independent planes,
notes_100 =  with half the switches in the system allocated to each plane.
notes_105 =  I/O traffic is restricted to one plane, while MPI traffic can
notes_110 =  use both planes.
node_compute_hw_adapter_IB_model000 = Mellanox MT27700 with ConnectX-4
node_compute_hw_adapter_IB_model001 = ASIC (PCIe x16 Gen3 8 GT/s)
node_compute_hw_cpu_char000 = 14 Core, 2.60 GHz, 9.6 GT/s QPI
node_compute_hw_cpu_char001 = Intel Turbo Boost Technology up to 3.50 GHz
node_compute_hw_cpu_char002 = Hyper-Threading Technology enabled
node_compute_sw_os000 = SUSE Linux Enterprise Server 11 SP4 (x86_64),
node_compute_sw_os001 = Kernel 3.0.101-71.1.10690.1.PTF-default
node_compute_sw_other000 = SGI Tempo Compute Node 3.3.0,
node_compute_sw_other001 = Build 714r18.sles11sp4-1604041900
node_fileserver_hw_adapter_IB_model000 = Mellanox MT27500 with ConnectX-3 ASIC
node_fileserver_hw_cpu_char000 = Intel Turbo Boost Technology up to 3.30 GHz
node_fileserver_hw_cpu_char001 = Hyper-Threading Technology disabled
node_fileserver_hw_disk000 = 45 TB RAID 6
node_fileserver_hw_disk001 = 8 x 6+2 900GB (WD, 10K RPM)
node_fileserver_hw_model000 = SGI MIS Server
node_fileserver_sw_os000 = SUSE Linux Enterprise Server 11 (x86_64),
node_fileserver_sw_os001 = Kernel 3.0.101-0.46-default
node_fileserver_sw_other000 = SGI Foundation Software 2.9,
node_fileserver_sw_other001 = Build 711r2.sles11sp3-1411192056
sw_c_compiler000 = Intel C++ Composer XE 2016 for Linux,
sw_c_compiler001 = Version 16.0.3.210 Build 20160415
sw_cxx_compiler000 = Intel C++ Composer XE 2016 for Linux
sw_cxx_compiler001 = Version 16.0.3.210 Build 20160405
sw_f_compiler000 = Intel Fortran Composer XE 2016 for Linux,
sw_f_compiler001 = Version 16.0.3.210 Build 20160405
system_class = Homogeneous
system_name000 = SGI ICE XA
system_name001 = (Intel Xeon E5-2690 v4, 2.6 GHz)