MPI2007 license: | 3440 | Test date: | Sep-2016 |
---|---|---|---|
Test sponsor: | Indiana University | Hardware Availability: | Aug-2016 |
Tested by: | Junjie Li | Software Availability: | Apr-2016 |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Ranks | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
104.milc | 64 | 206 | 7.60 | 207 | 7.56 | 207 | 7.55 | |||||||
107.leslie3d | 64 | 475 | 11.0 | 478 | 10.9 | 479 | 10.9 | |||||||
113.GemsFDTD | 64 | 595 | 10.6 | 597 | 10.6 | 599 | 10.5 | |||||||
115.fds4 | 64 | 411 | 4.74 | 411 | 4.75 | 411 | 4.75 | |||||||
121.pop2 | 64 | 649 | 6.36 | 652 | 6.33 | 642 | 6.43 | |||||||
122.tachyon | 64 | 909 | 3.08 | 908 | 3.08 | 908 | 3.08 | |||||||
126.lammps | 64 | 807 | 3.61 | 804 | 3.63 | 804 | 3.62 | |||||||
127.wrf2 | 64 | 550 | 14.2 | 551 | 14.1 | 556 | 14.0 | |||||||
128.GAPgeofem | 64 | 286 | 7.23 | 285 | 7.25 | 286 | 7.22 | |||||||
129.tera_tf | 64 | 788 | 3.51 | 787 | 3.52 | 788 | 3.51 | |||||||
130.socorro | 64 | 177 | 21.6 | 180 | 21.2 | 176 | 21.7 | |||||||
132.zeusmp2 | 64 | 359 | 8.63 | 359 | 8.64 | 360 | 8.62 | |||||||
137.lu | 64 | 409 | 9.00 | 408 | 9.00 | 409 | 8.99 |
Hardware Summary | |
---|---|
Type of System: | Homogeneous |
Compute Node: | KNL |
File Server Node: | KNL |
Head Node: | KNL |
Total Compute Nodes: | 1 |
Total Chips: | 1 |
Total Cores: | 64 |
Total Threads: | 64 |
Total Memory: | 96 GB |
Base Ranks Run: | 64 |
Minimum Peak Ranks: | -- |
Maximum Peak Ranks: | -- |
Software Summary | |
---|---|
C Compiler: | Intel C++ Composer XE 2016 for Linux, Version 16.0.3.210 Build 20160415 |
C++ Compiler: | Intel C++ Composer XE 2016 for Linux, Version 16.0.3.210 Build 20160415 |
Fortran Compiler: | Intel Fortran Composer XE 2016 for Linux, Version 16.0.3.210 Build 20160415 |
Base Pointers: | 64-bit |
Peak Pointers: | 64-bit |
MPI Library: | Intel MPI Library for Linux 5.1.3 Build 20160120 |
Other MPI Info: | None |
Pre-processors: | No |
Other Software: | None |
Hardware | |
---|---|
Number of nodes: | 1 |
Uses of the node: | head, compute, fileserver |
Vendor: | Colfax International |
Model: | None |
CPU Name: | Intel Xeon Phi 7210 |
CPU(s) orderable: | 1 chip |
Chips enabled: | 1 |
Cores enabled: | 64 |
Cores per chip: | 64 |
Threads per core: | 1 |
CPU Characteristics: | Intel Turbo Boost Technology off, Simultaneous Multithreading (SMT) off |
CPU MHz: | 1300 |
Primary Cache: | 32 KB I + 32 KB D on chip per core |
Secondary Cache: | 1 MB I+D on chip per two cores |
L3 Cache: | None |
Other Cache: | None |
Memory: | 96 GB (6 x 16 GB 2Rx8 PC4-2400T-REB-11, ECC) |
Disk Subsystem: | Intel S3510 SSD 800GB, SATA3 |
Other Hardware: | None |
Adapter: | 0 |
Number of Adapters: | 0 |
Slot Type: | 0 |
Data Rate: | 0 |
Ports Used: | 0 |
Interconnect Type: | 0 |
Software | |
---|---|
Adapter: | 0 |
Adapter Driver: | 0 |
Adapter Firmware: | -- |
Operating System: | CentOS Linux Release 7.2.1511 |
Local File System: | Linux/ext4 |
Shared File System: | None |
System State: | Multi-User |
Other Software: | None |
The config file option 'submit' was used.
130.socorro (base): "nullify_ptrs" src.alt was used. MPI startup command: mpirun command was used to start MPI jobs. BIOS settings: Intel Simultaneous Multithreading (SMT): off Intel Turbo Boost Technology (Turbo) : off Cluster Mode: quadrant Memory Mode: cache
mpiicc |
126.lammps: | mpiicpc |
mpiifort |
mpiicc mpiifort |
121.pop2: | -DSPEC_MPI_CASE_FLAG |
126.lammps: | -DMPICH_IGNORE_CXX_SEEK |
127.wrf2: | -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX |
130.socorro: | -assume nostd_intent_in |
-O3 -xMIC-AVX512 -no-prec-div -fp-model fast=2 -ipo -fma |
126.lammps: | -O3 -xMIC-AVX512 -no-prec-div -fp-model fast=2 -ipo -fma |
-O3 -xMIC-AVX512 -no-prec-div -fp-model fast=2 -ipo -fma |
-O3 -xMIC-AVX512 -no-prec-div -fp-model fast=2 -ipo -fma |