# Invocation command line: # /home/burton/MPI2007-v2.0.1/bin/runspec --config config.snb --size mref --iterations 3 --output_format=all --ranks=512 medium --flagsurl EM64T_Intel121_flags.xml # output_root was not used for this run ############################################################################ ##################################################################### # # Config file to run SPEC MPI2007 with Intel Software Toolchain # (Intel Compiler 12.0 and Intel MPI 4.0.3) # ##################################################################### env_vars = 1 basepeak = 1 reportable = 1 ignore_errors = 0 iterations = 3 makeflags = -j 4 tune = base size = mref use_version_url = 1 version_url = version.txt use_submit_for_speed = 1 output_format = all FC = mpiifort CC = mpiicc CXX = mpiicpc ##################################################################### # Portability flags ##################################################################### 121.pop2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG 126.lammps=default=default=default: CXXPORTABILITY = -DMPICH_IGNORE_CXX_SEEK 127.wrf2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX 130.socorro=default=default=default: srcalt=nullify_ptrs ################################################################# # Optimization flags ################################################################# default=default=default=default: OPTIMIZE = -O3 -xAVX -no-prec-div submit = mpiexec.hydra -f /export/home/burton/MPI2007-v2.0.1/all-nodes -genv I_MPI_DEVICE rdssm -genv I_MPI_FALLBACK_DEVICE disable -n $ranks $command ################################################################# # Notes ################################################################# test_sponsor = Dell Inc. license_num = 25 tester = Dell Inc. test_date = Sep-2012 hw_avail = Jun-2012 sw_avail = Sep-2011 prepared_by = Dell Inc. system_vendor = Dell Inc. node_compute_sw_other = None system_name000 = PowerEdge M420 (Intel Xeon E5-2470, 2.30 GHz) system_name001 = DDR3-1600 MHz # # Computation node info # node_compute_label = PowerEdge M420 node_compute_order = 1 node_compute_count = 32 node_compute_purpose = compute node_compute_hw_vendor = Dell node_compute_hw_model000= PowerEdge M420 installed in PowerEdge M1000e node_compute_hw_model001 = blade chassis node_compute_hw_cpu_name = Intel Xeon E5-2470 node_compute_hw_ncpuorder = 1-2 chips node_compute_hw_nchips = 2 node_compute_hw_ncores = 16 node_compute_hw_ncoresperchip = 8 node_compute_hw_nthreadspercore = 1 node_compute_hw_cpu_char000 = Intel Turbo Boost Technology up to 3.10 GHz, node_compute_hw_cpu_char001 = 8.0 GT/s QPI, Hyper-Threading disabled node_compute_hw_cpu_mhz = 2300 node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_scache = 256 KB I+D on chip per core node_compute_hw_tcache = 20 MB I+D on chip per chip, 20 MB shared / 8 cores node_compute_hw_ocache = None node_compute_hw_memory = 48 GB (6 x 8 GB 2Rx4 PC3-12800R-11, ECC) node_compute_hw_disk = Seagate 146 GB SAS ST9146803SS node_compute_hw_other = None node_compute_hw_adapter_ib_model = Mellanox ConnectX-3 SFF FDR10 node_compute_hw_adapter_ib_count = 1 node_compute_hw_adapter_ib_slot_type = PCIe x8 Gen3 node_compute_hw_adapter_ib_data_rate = InfiniBand 4x 10Gbps FDR10 node_compute_hw_adapter_ib_ports_used = 1 node_compute_hw_adapter_ib_interconnect = InfiniBand node_compute_hw_adapter_ib_driver = MLNX_OFED_LINUX-1.5.3-3.0.0-rhel6.2-x86_64 node_compute_hw_adapter_ib_firmware = 2.10.4562 node_compute_hw_adapter_fs_model000= Onboard Broadcom Dual Port 10Gb Ethernet node_compute_hw_adapter_fs_model001 = (BCM57810S) node_compute_hw_adapter_fs_model002 = Ethernet Controller node_compute_hw_adapter_fs_count = 1 node_compute_hw_adapter_fs_slot_type = PCI-Express x8 node_compute_hw_adapter_fs_data_rate = 10GbE node_compute_hw_adapter_fs_ports_used = 1 node_compute_hw_adapter_fs_interconnect = Ethernet node_compute_hw_adapter_fs_driver = 1.70.00-0 node_compute_hw_adapter_fs_firmware = 7.2.23 node_compute_sw_os = Red Hat EL 6.2, kernel 2.6.32-220.el6.x86_64 node_compute_sw_localfile = Linux/ext2 node_compute_sw_sharedfile = NFS node_compute_sw_state = Multi-User # # Fileserver node info # node_fileserver_label = PowerEdge R620 node_fileserver_order = 2 node_fileserver_count = 1 node_fileserver_purpose = fileserver node_fileserver_hw_vendor = Intel node_fileserver_hw_model = PowerEdge R620 node_fileserver_hw_cpu_name = Intel Xeon CPU E5-2680 node_fileserver_hw_ncpuorder = 1-2 chips node_fileserver_hw_nchips = 2 node_fileserver_hw_ncores = 16 node_fileserver_hw_ncoresperchip = 8 node_fileserver_hw_nthreadspercore = 2 node_fileserver_hw_cpu_char = 2.7GHz node_fileserver_hw_cpu_mhz = 2700 node_fileserver_hw_pcache = 32 KB I + 32 KB D on chip per core node_fileserver_hw_scache = 256 KB I+D on chip per core node_fileserver_hw_tcache = 20 MB I+D on chip per chip node_fileserver_hw_ocache = None node_fileserver_hw_memory = 64 GB node_fileserver_hw_disk = 5 disks, 146GB 15K SAS (RAID 0) node_fileserver_hw_other = None node_fileserver_hw_adapter_fs_model000 = Quad port Intel I350 Gigabit Network Controller node_fileserver_hw_adapter_fs_model001 = Ethernet Controller node_fileserver_hw_adapter_fs_count = 1 node_fileserver_hw_adapter_fs_slot_type = Integrated node_fileserver_hw_adapter_fs_data_rate = 1Gbps Ethernet node_fileserver_hw_adapter_fs_ports_used = 1 node_fileserver_hw_adapter_fs_interconnect = Ethernet node_fileserver_hw_adapter_fs_driver = 3.0.6-k node_fileserver_hw_adapter_fs_firmware = 1.5-6 node_fileserver_sw_os = Red Hat EL 6.2, kernel 2.6.32-220.el6.x86_64 node_fileserver_sw_localfile = None node_fileserver_sw_sharedfile = NFS node_fileserver_sw_state = Multi-User node_fileserver_sw_other = None # # IB interconnect # interconnect_ib_label = IB Switch interconnect_ib_order = 1 interconnect_ib_purpose = MPI traffic interconnect_ib_hw_vendor = Mellanox interconnect_ib_hw_model = Mellanox M4001F interconnect_ib_hw_switch_3601_model000= Mellanox M4001F installed in PowerEdge M1000e interconnect_ib_hw_switch_3601_model001 = blade chassis (Installed in slot B1 and C1) interconnect_ib_hw_switch_3601_count = 2 interconnect_ib_hw_switch_3601_ports = 16 interconnect_ib_hw_topo = Fat tree interconnect_ib_hw_switch_3601_data_rate = InfiniBand FDR10 interconnect_ib_hw_switch_3601_firmware = 9.1.3180 # # Cluster file system interconnect # interconnect_fs_label = Gigabit Ethernet interconnect_fs_order = 2 interconnect_fs_purpose = Cluster File System interconnect_fs_hw_vendor = Dell Inc. interconnect_fs_hw_model000= Onboard Broadcom Dual Port 10Gb interconnect_fs_hw_model001 = Ethernet(BCM57810S) interconnect_fs_hw_switch_fs_model000= PowerConnect M6220 (Modular Layer 3 blade switch interconnect_fs_hw_switch_fs_model001 = for PowerEdge M1000e blade chassis) in slot A1 interconnect_fs_hw_switch_fs_model002 = and A2 interconnect_fs_hw_switch_fs_count = 2 interconnect_fs_hw_switch_fs_ports = 40 interconnect_fs_hw_topo = Fat tree interconnect_fs_hw_switch_fs_data_rate = 1Gbps Ethernet interconnect_fs_hw_switch_fs_firmware = 4.2.0.4 # # Hardware # system_class = Homogeneous max_ranks = 512 max_peak_ranks = 512 # # Software # sw_c_compiler000= Intel C++ Composer XE 2011 for Linux, Version sw_c_compiler001 = 12.0.5.220 Build 20110719 sw_cxx_compiler000= Intel C++ Composer XE 2011 for Linux, Version sw_cxx_compiler001 = 12.0.5.220 Build 20110719 sw_f_compiler000= Intel Fortran Composer XE 2011 for Linux, Version sw_f_compiler001 = 12.0.5.220 Build 20110719 sw_auto_parallel = sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_mpi_library000= Intel MPI Library 4.0.3.008 Build 20110824 for sw_mpi_library001 = Linux sw_mpi_other = None sw_preprocessors = No sw_other = None # # General notes # notes_010 = MPI startup command: notes_015 = mpiexec.hydra command was used to start MPI jobs. notes_020 = notes_025 = BIOS settings: notes_030 = Intel Hyper-Threading Technology (SMT): Disabled (default is Enabled) notes_035 = Intel Turbo Boost Technology (Turbo) : Enabled (default is Enabled) notes_040 = notes_045 = RAM configuration: notes_050 = Compute nodes have 1x8-GB RDIMM on each memory channel. notes_055 = notes_060 = Network: notes_065 = Two 20-port switch notes_070 = notes_075 = Compute Node Environment: notes_080 = ulimit -s = unlimited notes_085 = ulimit -l = unlimited notes_090 = File "/etc/modprobe.d/mlx4_core.conf" modified to contain "options notes_095 = mlx4_core log_mtts_per_seg=5" notes_100 = notes_105 = notes_110 = notes_115 = notes_120 = notes_125 = # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: #flagsurl000 = http://www.spec.org/mpi2007/results/flags/EM64T_Intel121_flags.xml # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: flagsurl000 = http://www.spec.org/mpi2007/flags/EM64T_Intel121_flags.xml notes_000 =130.socorro (base): "nullify_ptrs" src.alt was used. notes_005 =