SPEC(R) MPIL2007 Summary SGI SGI Altix ICE 8400EX (AMD Opteron 6282 SE, 2.6GHz) Sat Jan 21 21:45:20 2012 MPI2007 License: 4 Test date: Jan-2012 Test sponsor: SGI Hardware availability: Nov-2011 Tested by: SGI Software availability: Nov-2011 Base Base Base Peak Peak Peak Benchmarks Ranks Run Time Ratio Ranks Run Time Ratio -------------- ------ --------- --------- ------ --------- --------- 121.pop2 256 775 5.02 S 121.pop2 256 777 5.01 * 121.pop2 256 778 5.00 S 122.tachyon 256 913 2.13 S 122.tachyon 256 913 2.13 S 122.tachyon 256 913 2.13 * 125.RAxML 256 1216 2.40 S 125.RAxML 256 1218 2.40 * 125.RAxML 256 1224 2.39 S 126.lammps 256 656 3.75 S 126.lammps 256 656 3.75 * 126.lammps 256 656 3.75 S 128.GAPgeofem 256 998 5.95 S 128.GAPgeofem 256 1001 5.93 S 128.GAPgeofem 256 1001 5.93 * 129.tera_tf 256 450 2.44 S 129.tera_tf 256 450 2.44 S 129.tera_tf 256 450 2.44 * 132.zeusmp2 256 442 4.80 * 132.zeusmp2 256 442 4.80 S 132.zeusmp2 256 442 4.79 S 137.lu 256 590 7.12 S 137.lu 256 591 7.10 S 137.lu 256 591 7.10 * 142.dmilc 256 326 11.3 S 142.dmilc 256 326 11.3 * 142.dmilc 256 326 11.3 S 143.dleslie 256 462 6.71 * 143.dleslie 256 462 6.71 S 143.dleslie 256 462 6.71 S 145.lGemsFDTD 256 667 6.61 S 145.lGemsFDTD 256 667 6.62 S 145.lGemsFDTD 256 667 6.61 * 147.l2wrf2 256 1363 6.02 * 147.l2wrf2 256 1363 6.02 S 147.l2wrf2 256 1363 6.02 S ============================================================================== 121.pop2 256 777 5.01 * 122.tachyon 256 913 2.13 * 125.RAxML 256 1218 2.40 * 126.lammps 256 656 3.75 * 128.GAPgeofem 256 1001 5.93 * 129.tera_tf 256 450 2.44 * 132.zeusmp2 256 442 4.80 * 137.lu 256 591 7.10 * 142.dmilc 256 326 11.3 * 143.dleslie 256 462 6.71 * 145.lGemsFDTD 256 667 6.61 * 147.l2wrf2 256 1363 6.02 * SPECmpiL_base2007 4.78 SPECmpiL_peak2007 Not Run BENCHMARK DETAILS ----------------- Type of System: Homogeneous Total Compute Nodes: 8 Total Chips: 16 Total Cores: 256 Total Threads: 256 Total Memory: 1 TB Base Ranks Run: 256 Minimum Peak Ranks: -- Maximum Peak Ranks: -- C Compiler: Intel C++ Composer XE 2011 for Linux, Version 12.1.1.256 Build 20111011 C++ Compiler: Intel C++ Composer XE 2011 for Linux, Version 12.1.1.256 Build 20111011 Fortran Compiler: Intel Fortran Composer XE 2011 for Linux, Version 12.1.1.256 Build 20111011 Base Pointers: 64-bit Peak Pointers: 64-bit MPI Library: SGI MPT 2.05 Other MPI Info: OFED 1.5.2 Pre-processors: None Other Software: None Node Description: SGI Altix ICE 8400EX Compute Node =================================================== HARDWARE -------- Number of nodes: 8 Uses of the node: compute Vendor: SGI Model: SGI Altix ICE 8400EX (AMD Opteron 6282 SE, 2.6GHz) CPU Name: AMD Opteron 6282 SE CPU(s) orderable: 1-2 chips Chips enabled: 2 Cores enabled: 32 Cores per chip: 16 Threads per core: 1 CPU Characteristics: 16 cores/chip, 2.6 GHz AMD Turbo CORE technology up to 3.30 GHz CPU MHz: 2600 Primary Cache: 512 KB I on chip per chip, 64 KB I shared / 2 cores; 16 KB D on chip per core Secondary Cache: 16 MB I+D on chip per chip, 2 MB I+D on chip per core L3 Cache: 16 MB I+D on chip per chip, 8 MB shared / 8 cores Other Cache: None Memory: 128 GB (16 x 8 GB 2Rx4 PC3-12800R-11, ECC) Disk Subsystem: None Other Hardware: None Adapter: Mellanox MT26428 ConnectX IB QDR (PCIe x8 Gen2 5 GT/s) Number of Adapters: 1 Slot Type: PCIe x8 Gen2 Data Rate: InfiniBand 4x QDR Ports Used: 2 Interconnect Type: InfiniBand SOFTWARE -------- Adapter: Mellanox MT26428 ConnectX IB QDR (PCIe x8 Gen2 5 GT/s) Adapter Driver: OFED-1.5.2 Adapter Firmware: 2.7.0 Operating System: SUSE Linux Enterprise Server 11 SP1 (x86_64) Kernel 2.6.32.46-0.3-default #1 SMP Local File System: NFSv3 Shared File System: NFSv3 IPoIB System State: Run level 3 (Multi-User) Other Software: SGI Performance Suite 1.3, Build 705rp8.sles11-1111092106 SGI Tempo Compute Node 2.5, Build 705r10.sles11-1110192111 Node Description: SGI InfiniteStorage 4000 ========================================== HARDWARE -------- Number of nodes: 1 Uses of the node: fileserver Vendor: SGI Model: SGI Altix 450 (Intel Itanium 2, 1.6GHz) CPU Name: Intel Itanium 2 9030 CPU(s) orderable: 2-38 chips Chips enabled: 2 Cores enabled: 4 Cores per chip: 2 Threads per core: 1 CPU Characteristics: 1.6GHz/8MB, 533MHz FSB CPU MHz: 1600 Primary Cache: 16 KB I + 16 KB D on chip per core Secondary Cache: 1 MB I + 256 KB D on chip per core L3 Cache: 4 MB I+D on chip per core Other Cache: None Memory: 24 GB (12 x 2 GB, 2Rx4 PC2-3200-3, ECC) Disk Subsystem: 16 TB RAID 5 32 x 500 GB SATA (Seagate Barracuda 7.2K) Other Hardware: None Adapter: Mellanox MT25208 InfiniHost III Ex (PCIe x8 Gen1 2.5 GT/s) Number of Adapters: 2 Slot Type: PCIe x8 Gen1 Data Rate: InfiniBand 4x DDR Ports Used: 2 Interconnect Type: InfiniBand SOFTWARE -------- Adapter: Mellanox MT25208 InfiniHost III Ex (PCIe x8 Gen1 2.5 GT/s) Adapter Driver: OFED-1.4.2 Adapter Firmware: 5.3.0 Operating System: SUSE Linux Enterprise Server 11 SP1 (ia64) Kernel 2.6.32.12-0.7-default Local File System: xfs Shared File System: -- System State: Run Level 3 (Multi-User) Other Software: SGI ProPack 7SP1 for Linux, Build 701r2.sles11-1005242307 Interconnect Description: InfiniBand (MPI and I/O) ================================================== HARDWARE -------- Vendor: Mellanox Technologies and SGI Model: None Switch Model: SGI QDR_1.5_HYPR_2454 with Mellanox Device 48438 (Infiniscale IV) Number of Switches: 2 Number of Ports: 36 Data Rate: InfiniBand 4x QDR Firmware: 5040005 Topology: Enhanced Hypercube Primary Use: MPI and I/O traffic Submit Notes ------------ The config file option 'submit' was used. General Notes ------------- Software environment: export MPI_REQUEST_MAX=65536 export MPI_TYPE_MAX=32768 export MPI_BUFS_THRESHOLD=1 export MPI_IB_RAILS=2 ulimit -s unlimited BIOS settings: AMI BIOS version 2.0 Job Placement: In the base run, each MPI job is assigned to a topologically compact set of nodes, i.e. the minimal needed number of switches was used for each job: 2 switch for up to 256 ranks, 4 switches for 512 ranks, 8 switches for 1024 ranks. Additional notes regarding interconnect: The Infiniband network consists of two independent planes, with half the switches in the system allocated to each plane. I/O traffic is restricted to one plane, while MPI traffic can use both planes. SGI manufactures its own switch blades using unmodified Mellanox switch ASICs. The test system has SGI QDR_1.5_HYPR_2454 switch with Mellanox 36-port QDR Infiniband switch Device 48438 (InfiniScale IV). Base Compiler Invocation ------------------------ C benchmarks: icc C++ benchmarks: 126.lammps: icpc Fortran benchmarks: ifort Benchmarks using both Fortran and C: icc ifort Base Portability Flags ---------------------- 121.pop2: -DSPEC_MPI_CASE_FLAG Base Optimization Flags ----------------------- C benchmarks: -O3 -xSSE2 -ipo -no-prec-div C++ benchmarks: 126.lammps: -O3 -xSSE2 -ipo -no-prec-div -ansi-alias Fortran benchmarks: -O3 -xSSE2 -ipo -no-prec-div Benchmarks using both Fortran and C: -O3 -xSSE2 -ipo -no-prec-div Base Other Flags ---------------- C benchmarks: -lmpi C++ benchmarks: 126.lammps: -lmpi Fortran benchmarks: -lmpi Benchmarks using both Fortran and C: -lmpi The flags file that was used to format this result can be browsed at http://www.spec.org/mpi2007/flags/SGI_x86_64_Intel12_flags.html You can also download the XML flags source by saving the following link: http://www.spec.org/mpi2007/flags/SGI_x86_64_Intel12_flags.xml SPEC and SPEC MPI are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ----------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Copyright 2006-2010 Standard Performance Evaluation Corporation Tested with SPEC MPI2007 v2.0.1. Report generated on Tue Jul 22 13:44:02 2014 by MPI2007 ASCII formatter v1463. Originally published on 8 February 2012.