# Invocation command line: # C:\install\mpi2007\bin\runspec --deletework --tune=base --ranks=64 --iterations=3 --reportable --config=win-vs_intel-msmpi-ipo_v2.cfg medium # output_root used was "C:\spec-out" ############################################################################ action = validate teeout = yes output_format = all tune = base size = mref iterations = 3 runlist = medium makeflags = ext = intel_win64_ipo keeptmp = false flagsurl000 = http://www.spec.org/mpi2007/flags/dell.ic10.windows.flags.20120720.xml # the output root is a link to a ramdisk output_root = C:\spec-out license_num = 4113 company_name = Fraunhofer SCAI machine_name = Gambrinus hw_avail = Jan-2010 sw_avail = Aug-2010 sw_other = -- prepared_by = Steffen Claus LDOUT = /out:$@.exe CC = icl CXX = icl FC = ifort F77 = ifort CPP = icl #LD = icl #CLD = # Linker for C #CXXLD = # Linker for C++ CPPFLAGS = /E # Preprocess to stdout OBJ = .obj PATHSEP = / env_vars = yes expand_notes = 1 ENV_MPI_BITNESS=64 ENV_MPI_WRAPPER_SYNTAX=windows ########################################################################### # # MPI # ########################################################################### ##TODO: test normal slashes MPI_INC = /I:"C:/Program Files/Microsoft HPC Pack 2008 SDK/Include" MPI_LIB = /link /libpath:"C:/Program Files/Microsoft HPC Pack 2008 SDK/Lib/amd64" msmpifec.lib msmpifmc.lib msmpi.lib # To exclude possible problems with whitespaces in the path, # I copied the contents from above to here: #MPI_INC = /I:C:\install\msmpiIncludes #MPI_LIB = /link /libpath:C:\install\msmpiLibs msmpifec.lib msmpifmc.lib msmpi.lib #MPI_LIB = /link /libpath:C:\install\msmpiLibs msmpifec.lib msmpifmc.lib msmpi.lib MPI_BIN = default=default=default=default: STACKSIZE= /F3950000000 ENV_SPEC_HPG_PARALLEL = MPI CPORTABILITY = FPORTABILITY = #test with /Qip instead of Qipo COPTIMIZE = /O3 /QxSSE4.2 /Qipo /Qprec-div- CXXOPTIMIZE = /O3 /QxSSE4.2 /Qipo /Qprec-div- FOPTIMIZE = /O3 /QxSSE4.2 /Qipo /Qprec-div- CPPFLAGS = FPPFLAGS = FCFLAGS = EXTRA_CFLAGS = ${MPI_INC} EXTRA_CXXFLAGS = ${MPI_INC} EXTRA_FFLAGS = ${MPI_INC} EXTRA_LDFLAGS = ${STACKSIZE} EXTRA_LIBS = ${MPI_LIB} use_submit_for_speed = yes ENV_MPI_ENABLED = ENABLED MPIRUN = $MPI_RUN $MPI_FLAGS use_submit_for_speed = 1 #submit = mympiexec.bat $benchmark $ranks $command -tracefile C:\Users\jdolesch\wrf_mref.etl submit = C:\install\mpi2007\mympiexec_base.bat $benchmark $ranks $command 115.fds4: CPORTABILITY = /DSPEC_MPI_UC_NO_TRAILING_UNDERSCORE FPORTABILITY = /fpscomp:general 121.pop2: CPORTABILITY = /DSPEC_MPI_WINDOWS_ICL 127.wrf2: NEEDATFILE=1 CPORTABILITY = /DSPEC_MPI_WINDOWS_ICL /DSPEC_MPI_COMM_F2C /DSPEC_MPI_CASE_FLAG FPORTABILITY = /us /Qlowercase 129.tera_tf: FPORTABILITY = /fpscomp:general 130.socorro: CPORTABILITY = /DSPEC_NO_UNDERSCORE /DSPEC_MPI_COMM_F2C FPORTABILITY = /Qlowercase 132.zeusmp2: CPORTABILITY = /DSPEC_MPI_WINDOWS_ICL FPORTABILITY = /fpscomp:general # Notes test_sponsor = Fraunhofer SCAI tester = Steffen Claus interconnect_ib_hw_topo = Single switch # test_date = Dec-2010 hw_avail = Jan-2010 sw_avail = Aug-2010 prepared_by = Fraunhofer SCAI system_vendor = Gateway system_name = GW2000h-GW170hq (Intel Xeon X5570, 2.93 GHz) node_compute_hw_adapter_eth_slot_type = onboard node_compute_hw_adapter_eth_ports_used = 1 node_compute_hw_adapter_eth_model = Intel 82574L Gigabit Network Connection node_compute_hw_adapter_eth_interconnect = Ethernet node_compute_hw_adapter_eth_data_rate = Gigabit Ethernet node_compute_hw_adapter_eth_count = 2 node_compute_hw_adapter_ib_slot_type = onboard interconnect_eth_purpose = CIFS traffic interconnect_eth_order = 2 interconnect_eth_label = Ethernet Switch interconnect_eth_hw_vendor = Extreme Networks interconnect_eth_hw_topo = Single Switch interconnect_eth_hw_switch_0_ports = 24 interconnect_eth_hw_switch_0_model = Summit X450-24 t interconnect_eth_hw_switch_0_firmware = ExtremeWare XOS 11.4.3.4 v1143b4 interconnect_eth_hw_switch_0_data_rate = Gigabit Ethernet interconnect_eth_hw_switch_0_count = 1 interconnect_eth_hw_model = Summit system_class = Homogeneous max_ranks = 128 max_peak_ranks = 128 # # Computation node info # node_compute_label = Gateway GW2000h node_compute_order = 1 node_compute_count = 8 node_compute_purpose = compute node_compute_hw_vendor = Gateway node_compute_hw_model = GW2000h-GW170hq node_compute_hw_cpu_name = Intel Xeon X5570 @ 2.93 GHz node_compute_hw_ncpuorder = 1-2 chips node_compute_hw_nchips = 2 node_compute_hw_ncores = 8 node_compute_hw_ncoresperchip = 4 node_compute_hw_nthreadspercore = 1 node_compute_hw_cpu_char =-- node_compute_hw_cpu_mhz = 2930 node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_scache = 256 KB I+D on chip per core node_compute_hw_tcache = 8 MB I+D on chip per chip, 8 MB shared / 4 cores node_compute_hw_ocache = None node_compute_hw_memory = 24 GB node_compute_hw_other = None #node_compute_hw_disk = Western Digital 160 GB SATA WD160YS-23SHBO #node_compute_hw_adapter_fs_firmware = 2.4-0 #node_compute_hw_adapter_fs_driver = OS default (v.9.11.5.7) #node_compute_hw_adapter_fs_interconnect = Ethernet #node_compute_hw_adapter_fs_model000 = Intel Corporation 80003ES2LAN Gigabit Ethernet #node_compute_hw_adapter_fs_model001 = Controller (Copper) (rev 01) #node_compute_hw_adapter_fs_count = 2 #node_compute_hw_adapter_fs_ports_used = 1 #node_compute_hw_adapter_fs_data_rate = Gigabit Ethernet node_compute_hw_adapter_ib_model = Mellanox Technologies MT26418 node_compute_hw_adapter_ib_count = 1 #node_compute_hw_adapter_ib_slot_type = PCIe x8 Gen2 node_compute_hw_adapter_ib_data_rate = QDR node_compute_hw_adapter_ib_ports_used = 1 node_compute_hw_adapter_ib_interconnect = InfiniBand node_compute_hw_adapter_ib_driver = Mellanox WinOF (v. 2.1.2) node_compute_hw_adapter_ib_firmware = 2.7.200 node_compute_sw_os000 = Windows HPC Server 2008 R2 node_compute_sw_os001 = Service Pack 1 #node_compute_sw_os001 = Service Pack 2 #node_compute_sw_localfile = Windows/NTFS #node_compute_sw_state = Multi-User node_compute_sw_sharedfile = Network shared Ramdisk #node_compute_sw_other = lustre 1.6.7 kernel patches interconnect_ib_label = Infiniband Switch interconnect_ib_order = 1 interconnect_ib_purpose = MPI traffic interconnect_ib_hw_vendor = Mellanox interconnect_ib_hw_model = MTS3600 interconnect_ib_hw_switch_3600_model = Mellanox MTS3600 interconnect_ib_hw_switch_3600_count = 1 interconnect_ib_hw_switch_3600_ports = 36 interconnect_ib_hw_switch_3600_data_rate = QDR interconnect_ib_hw_switch_3600_firmware = EFM_PPC_405EX #interconnect_fs_order = 0 #interconnect_fs_label = Gigabit Ethernet #interconnect_fs_purpose = Cluster File System #interconnect_fs_hw_vendor = ProCurve Networking #interconnect_fs_hw_model = HP ProCurve Switch 5406zl Intelligent Edge J8697A #interconnect_fs_hw_switch_fs_model = HP ProCurve Switch 5406zl Intelligent Edge J8697A #interconnect_fs_hw_switch_fs_count = 1 #interconnect_fs_hw_switch_fs_ports = 144 #interconnect_fs_hw_switch_fs_data_rate = 1Gbps Ethernet #interconnect_fs_hw_switch_fs_firmware = -- #interconnect_fs_hw_topo = Single switch sw_c_compiler = Intel C++ Compiler 11.1 for Windows (11.1.067) sw_cxx_compiler = Intel C++ Compiler 11.1 for Windows (11.1.067) sw_f_compiler = Intel Fortran Compiler 11.1 for Windows (11.1.067) sw_base_ptrsize = 64-bit sw_peak_ptrsize = 64-bit sw_mpi_library = MS MPI Version 4.0 Update 1 Build 8/18/2010 sw_mpi_other = -- sw_preprocessors= No # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. # default: # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 = MPI startup command: notes_005 = mpiexec command was used to start MPI jobs. This command starts notes_010 = an independent ring of mpd daemons, launches an MPI job, and shuts notes_015 = down the mpd ring upon the job termination. notes_020 = notes_025 = Batch system: notes_030 = The internal Job Scheduler of Windows HPC Server 2008 was used. notes_035 = notes_040 = BIOS settings: notes_045 = Intel Hyper-Threading Technology (SMT): Disabled (default is Enabled) notes_050 = Intel Turbo Boost Technology (Turbo) : Enabled (default is Enabled) notes_055 = notes_060 = RAM configuration: notes_065 = Compute nodes have 6x4-GB dual rank DDR3-1333 RAM. notes_070 = Head node has 4x2GB single rank DDR2-667 RAM. notes_075 = notes_080 = Network: notes_085 = Windows HPC Server topology no. 3. Head node and all compute nodes are interconnected notes_090 = by 1GB Ethernet and QDR Infiniband. Each interconnect type has one single switch.