# Invocation command line: # /install/mpi2007/bin/runspec --config=sles11-intel-kmr-64cores --nobuild --delay 30 --deletework --iterations=3 --reportable --ranks=64 medium --define MPIRUN_OPTS= -f /root/mpd.hosts --rsh=ssh -genv I_MPI_FABRICS shm:dapl -genv I_MPI_DAPL_PROVIDER ofa-v2-mlx4_0-1 -machinefile /install/hostfiles/hosts_64_8x8 # output_root used was "/ramdisk-on-head" ############################################################################ # Invocation command line: # /vol/benchnfs1/tmp/xinghong/mpi2007/bin/runspec -c impi_11.cfg --size mref --iterations 3 --reportable --define MPIRUN_OPTS=-genv I_MPI_DEVICE rdssm -genv I_MPI_FALLBACK_DEVICE no -perhost 16 --ranks 128 all ############################################################################ use_version_url = 1 # flagsurl000=http://www.spec.org/mpi2007/results/flags/EM64T_Intel111_flags.20100413.00.xml ext = kmr makeflags = -j 7 env_vars = 1 #basepeak = 1 #reportable = 0 #ignore_errors = 1 runlist = medium iterations = 3 tune = base size = mref output_format = all use_submit_for_speed = 1 submit = mpirun %{MPIRUN_OPTS} -np $ranks $command # submit = mpiexec -genv I_MPI_DEVICE rdssm -genv I_MPI_FALLBACK_DEVICE disable -perhost 8 -n $ranks $command output_root=/ramdisk-on-head FC = mpiifort CC = mpiicc CXX = mpiicpc ##################################################################### # Portability flags ##################################################################### 121.pop2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG 126.lammps=default=default=default: CXXPORTABILITY = -DMPICH_IGNORE_CXX_SEEK 127.wrf2=default=default=default: CPORTABILITY = -DSPEC_MPI_CASE_FLAG -DSPEC_MPI_LINUX #to match the 128 core windows run #OPTIMIZE = -O3 -xSSE4.2 -no-prec-div ################################################################# # Optimization flags ################################################################# default=default=default=default: OPTIMIZE = -O3 -xSSE4.2 -ipo -no-prec-div # For mpi trace LIBS = ################################################################# # Notes ################################################################# test_sponsor = Fraunhofer SCAI license_num = 4113 tester = Steffen Claus test_date = Dec-2010 hw_avail = Jan-2010 sw_avail = Aug-2010 prepared_by = Fraunhofer SCAI system_vendor = Gateway system_name = GW2000h-GW170hq (Intel Xeon X5570, 2.93 Ghz) node_compute_sw_sharedfile = Network shared Ramdisk node_compute_hw_adapter_nfs_slot_type = onboard node_compute_hw_adapter_nfs_ports_used = 1 node_compute_hw_adapter_nfs_model = Intel 82574L Gigabit Network Connection node_compute_hw_adapter_nfs_interconnect = Ethernet node_compute_hw_adapter_nfs_data_rate = Gigabit Ethernet node_compute_hw_adapter_nfs_count = 2 node_compute_hw_adapter_ib_slot_type = onboard interconnect_ib_hw_topo = Single Switch interconnect_eth_purpose = NFS traffic interconnect_eth_order = 2 interconnect_eth_label = Ethernet Switch interconnect_eth_hw_vendor = Extreme Networks interconnect_eth_hw_topo = Single Switch interconnect_eth_hw_switch_0_ports = 24 interconnect_eth_hw_switch_0_model = Summit X450-24 t interconnect_eth_hw_switch_0_firmware = ExtremeWare XOS 11.4.3.4 v1143b4 interconnect_eth_hw_switch_0_data_rate = Gigabit Ethernet interconnect_eth_hw_switch_0_count = 1 interconnect_eth_hw_model = Summit system_class = Homogeneous max_ranks = 128 interconnect_ib_label = Infiniband Switch interconnect_ib_order = 1 interconnect_ib_purpose = MPI traffic interconnect_ib_hw_vendor = Mellanox interconnect_ib_hw_model = MTS3600 interconnect_ib_hw_switch_0_count = 1 interconnect_ib_hw_switch_0_model = Mellanox MTS3600 interconnect_ib_hw_switch_0_ports = 36 interconnect_ib_hw_switch_0_data_rate = QDR interconnect_ib_hw_switch_0_firmware = EFM_PPC_405EX # # Computation node info # node_compute_label = Gateway GW2000h node_compute_order = 1 node_compute_count = 8 node_compute_purpose = compute node_compute_hw_vendor = Gateway node_compute_hw_model = GW2000h-GW170hq node_compute_hw_cpu_mhz = 2930 node_compute_hw_cpu_name = Intel Xeon X5570 @ 2.93 GHz node_compute_hw_nchips = 2 node_compute_hw_ncores = 8 node_compute_hw_ncoresperchip = 4 node_compute_hw_nthreadspercore = 1 node_compute_hw_memory = 24 GB node_compute_hw_ncpuorder = 1-2 chips node_compute_hw_ocache = None node_compute_hw_pcache = 32 KB I + 32 KB D on chip per core node_compute_hw_scache = 256 KB I+D on chip per core node_compute_hw_tcache = 8 MB I+D on chip per chip, 8 MB shared / 4 cores node_compute_hw_other = None node_compute_hw_adapter_ib_model = Mellanox Technologies MT26418 node_compute_hw_adapter_ib_count = 1 node_compute_hw_adapter_ib_data_rate = QDR node_compute_hw_adapter_ib_ports_used = 1 node_compute_hw_adapter_ib_interconnect = InfiniBand node_compute_hw_adapter_ib_driver = OFED 1.5.1 node_compute_hw_adapter_ib_firmware = 2.7.200 node_compute_sw_os = SLES 11 sw_c_compiler = Intel C++ Compiler 11.1 for Linux (11.1.073) sw_cxx_compiler = Intel C++ Compiler 11.1 for Linux (11.1.073) sw_f_compiler = Intel Fortran Compiler 11.1 for Linux (11.1.073) sw_base_ptrsize = 64-bit sw_mpi_library = Intel MPI 4.0.0.028 flagsurl = /install/mpi2007/config/EM64T_Intel111_flags.20100202.xml # /vol/benchnfs1/tmp/xinghong/mpi2007/bin/runspec -c impi_11.cfg --size mref --iterations 3 --reportable --define MPIRUN_OPTS=-genv I_MPI_DEVICE rdssm -genv I_MPI_FALLBACK_DEVICE no -perhost 16 --ranks 128 all # output_root was not used for this run ############################################################################ use_version_url = 1 # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: sw_peak_ptrsize = Not Applicable flagsurl000 = http://www.spec.org/mpi2007/flags/EM64T_Intel111_flags.20100202.xml notes_000 = MPI startup command: notes_005 = mpirun command was used to start MPI jobs. This command starts notes_010 = an independent ring of mpd daemons, launches an MPI job, and shuts notes_015 = down the mpd ring upon the job termination. notes_020 = notes_025 = BIOS settings: notes_030 = Intel Hyper-Threading Technology (SMT): Disabled (default is Enabled) notes_035 = Intel Turbo Boost Technology (Turbo) : Enabled (default is Enabled) notes_040 = notes_045 = RAM configuration: notes_050 = Compute nodes have 6x4-GB dual rank DDR3-1333 RAM. notes_055 = Head node has 4x2GB single rank DDR2-667 RAM. notes_060 = notes_065 = Network: notes_070 = Head node and all compute nodes are interconnected by 1GB Ethernet and notes_075 = QDR Infiniband. Each interconnect type has one single switch.