This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp_rate95 | 243 |
|---|---|
| SPECfp_rate_base95 | 225 |
| Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|---|
| 101.tomcatv | 1 | 87.8 | 379 | 1 | 68 | 491 |
| 102.swim | 1 | 180 | 431 | 1 | 142 | 547 |
| 103.su2cor | 1 | 87.2 | 145 | 1 | 87 | 145 |
| 104.hydro2d | 1 | 118 | 183 | 1 | 111 | 195 |
| 107.mgrid | 1 | 108 | 209 | 1 | 108 | 208 |
| 110.applu | 1 | 120 | 165 | 1 | 120 | 166 |
| 125.turb3d | 1 | 159 | 232 | 1 | 159 | 233 |
| 141.apsi | 1 | 99.2 | 191 | 1 | 97 | 195 |
| 145.fpppp | 1 | 318 | 272 | 1 | 309 | 280 |
| 146.wave5 | 1 | 144 | 187 | 1 | 127 | 212 |
| SPECfp_rate_base95 | 225 | |||||
| SPECfp_rate95 | 243 | |||||
Tester Information:
| SPEC License #: | 11 |
|---|---|
| Tested By: | IBM, Austin, TX |
| Test Date: | Jul-99 |
| Hardware Avail: | Oct-98 |
| Software Avail: | Jul-99 |
Hardware Information:
| Model Name: | RS/6000 43P-260 (1 CPU) |
|---|---|
| CPU: | 200 MHz POWER3 |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 32KB I + 64KB D (on chip) |
| Secondary Cache: | 4MB unified (off chip) |
| Other Cache: | None |
| Memory: | 512 MB |
| Disk Subsystem: | 1 x 4.5GB |
| Other Hardware: | Ethernet |
Software Information:
| Operating System: | AIX 4.3.2 |
|---|---|
| Compiler: | XL Fortran version 6.1.0.0 |
| KAP version 3.2 | |
| VAST-2 version 4.01X8 | |
| File System: | AIX/JFS |
| System State: | Multi-user |
Notes:
Base: -O4 -qipa=level=2:noobject -lmass Peak 101: -O4 -qipa=level=2:noobject -qhot=arraypad=52 -bnso -bI:/lib/syscalls.exp 102: -O4 -qipa=level=2:noobject -qhot=arraypad=28 -qstrict -qpdf1/pdf2 -lmass 103: -O4 -qipa=level=2:noobject -qhot=arraypad=44 -Pv -Wp,-ew,-o -lmass -bnso -bI:/lib/syscalls.exp 104: -O3 -qarch=pwr3 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp 107: -O4 -qipa=level=2:noobject -lmass -bnso -bI:/lib/syscalls.exp; fdpr -R2 110: -O4 -qipa=level=2:noobject -qnosave -lmass 125: -O4 -qipa=level=2:noobject -qnosave -lmass 141: -O3 -qhot -qtbtable=none -qarch=pwr3 -qnosave -lmass -bnso -bI:/lib/syscalls.exp 145: -O4 -Q -Pv -Wp,-ea27,-o -1 -qnosave -qmaxmem=-1 -qpdf1/pdf2 -lmass -bnso -bI:/lib/syscalls.exp 146: -O3 -qarch=pwr3 -Pk -Wp,-ag=a,-f -qxlf77=nopersistent -lmass -bnso -bI:/lib/syscalls.exp NOTE: This result applies only to 43P-260 systems running the SPX99028 . firmware level. For all other configurations, the previously . published results are valid.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Wed Sep 15 16:30:11 1999First published at SPEC.org on 15-Sep-1999