This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 334 |
---|---|
SPECfp_rate_base95 | 297 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 2 | 203 | 328 | 2 | 179 | 372 |
102.swim | 2 | 320 | 484 | 2 | 313 | 495 |
103.su2cor | 2 | 123 | 205 | 2 | 108 | 232 |
104.hydro2d | 2 | 305 | 142 | 2 | 290 | 149 |
107.mgrid | 2 | 171 | 263 | 2 | 170 | 265 |
110.applu | 2 | 243 | 163 | 8 | 731 | 217 |
125.turb3d | 2 | 237 | 312 | 2 | 230 | 321 |
141.apsi | 2 | 79.2 | 477 | 2 | 77 | 493 |
145.fpppp | 2 | 418 | 414 | 4 | 560 | 617 |
146.wave5 | 2 | 121 | 445 | 2 | 112 | 484 |
SPECfp_rate_base95 | 297 | |||||
SPECfp_rate95 | 334 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Palo Alto |
Test Date: | Feb-99 |
Hardware Avail: | Mar-99 |
Software Avail: | Feb-99 |
Hardware Information:
Model Name: | Sun Enterprise 250 |
---|---|
CPU: | 400 MHz UltraSPARC-II |
FPU: | Integrated |
Number of CPU(s): | 2 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 2MB (I+D) off chip |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 2 x 4.2GB |
Other Hardware: | Fast Ethernet |
Software Information:
Operating System: | Solaris 7 (kernel/unix) |
---|---|
Compiler: | Sun f77 5.0 Developer Release (12/22/98) |
File System: | UFS |
System State: | Single User |
Kernel Extensions: | consistent_coloring=1 |
Notes:
P1= -xprofile=collect:`pwd`/../feedback; P2= `pwd`/../feedback BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch 101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch -Qoption 102.swim: -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2 103.su2cor: -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5 103.su2cor: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}; 104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde 104.hydro2d: PASS1= ${P1}; PASS2= ${P2}; 107.mgrid: -fast -xarch=v8plusa -xprefetch -fsimple=2 ${BCOPY} 107.mgrid: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}; 110.applu: -fast -xarch=v8plusa -Qoption iropt 125.turb3d: -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 -Qoption 125.turb3d: PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}; 141.apsi: -fast -xarch=v8plusa -xchip=ultra3 -fsimple=2 -stackvar 141.apsi: ${INV} -Qoption iropt -O4+algassoc; PASS1= -xO4 ${P1}; PASS2= 145.fpppp: -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend 145.fpppp: PASS1= ${P1}; PASS2= ${P2}; 146.wave5: -fast -xarch=v8plusa -stackvar -fsimple=2 -Qoption iropt Shell limits: # ulimit -n 1024 or % limit descriptors 1024 Config file: E250_DT.pub_sp.int.fp_3.cfg 99/01/27
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Mar 16 11:14:15 1999First published at SPEC.org on 16-Mar-1999