SPECfp95

Sun Microsystems

Ultra 5 Model 270

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	234	15.8	216	17.1
102.swim	8600	408	21.1	357	24.1
103.su2cor	1400	290	4.83	281	4.99
104.hydro2d	2400	458	5.24	447	5.37
107.mgrid	2500	283	8.83	282	8.86
110.applu	2200	309	7.12	249	8.82
125.turb3d	4100	493	8.32	386	10.6
141.apsi	2100	322	6.53	349	6.02
145.fpppp	9600	1080	8.89	432	22.2
146.wave5	3000	238	12.6	198	15.1
SPECfp_base95			8.93
		SPECfp95			10.6

Tester Information:

SPEC License #:	6
Tested By:	Sun, Palo Alto
Test Date:	Sep-98
Hardware Avail:	Nov-98
Software Avail:	Oct-98

Hardware Information:

Model Name:	Ultra 5 Model 270
CPU:	270 MHz UltraSPARC-IIi
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	16KBI+16KBD on chip
Secondary Cache:	256KB(I+D) off chip
Other Cache:	None
Memory:	512MB
Disk Subsystem:	1 x 4.3GB
Other Hardware:	Fast Ethernet
	System clock frequency: 90 MHz

Software Information:

Operating System:	Solaris 2.6 3/98
Compiler:	Sun f77 SF775.0 EFT1 (8/98)
File System:	UFS
System State:	Single User
Kernel Extensions:

Notes:

P1= -xprofile=collect:`pwd`/../feedback
P2= -xprofile=use:`pwd`/../feedback
BCOPY=-Qoption iropt -O4+bcopy; INV=-Qoption iropt -O4+invccexp; 
Baseline: -fast -xarch=v8plusa -fsimple=2 -xprefetch
Peak:    
101.tomcatv: -fast -xarch=v8plusa -xpad=local:23 -xprefetch -Qoption iropt -O4+data_access
102.swim:    -fast -xarch=v8plusa -xpad=common:15 -xprefetch -fsimple=2
103.su2cor:  -fast -xarch=v8plusa -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2  ${BCOPY}
103.su2cor:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
104.hydro2d: -fast -xarch=v8plusa -xprefetch -Qoption iropt -O4+pde -fsimple=2
104.hydro2d: PASS1= ${P1}; PASS2= ${P2}
107.mgrid:   -fast -xarch=v8plusa -xprefetch -fsimple=2  ${BCOPY}
107.mgrid:   PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
110.applu:   -fast -xarch=v8plusa -Qoption iropt -O4+scalarrep+ddint+perfect+loop_dist+pde+algassoc,-Mt6000,-Mr20000,-Ma140,-ldstr -fsimple=2
125.turb3d:  -fast -xarch=v8plusa -stackvar -xpad -fsimple=2 -Qoption iropt -O4+bcopy ${INV} -xvector=yes
125.turb3d:  PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
141.apsi:    -fast -xarch=v8plusa -xchip=ultra3 -fsimple=2 -stackvar  -Qoption iropt -Si36  ${INV} -Qoption iropt -O4+algassoc
141.apsi:    PASS1= -xO4 ${P1}; PASS2= -xO5 -xsafe=mem ${P2}
145.fpppp:   -fast -xarch=v8plusa -xO5 -xsafe=mem -fsimple=2 -nodepend -Qoption iropt -O4+algassoc -Qoption iropt -reroll=1
145.fpppp:   PASS1= ${P1}; PASS2= ${P2}
146.wave5:   -fast -xarch=v8plusa  -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Shell limits: # ulimit -n 1024  or % limit descriptors 1024
Config file: ultra5_fp.cfg

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 08-Dec-1998