This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECint95 | 13.0 |
---|---|
SPECint_base95 | 10.4 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
099.go | 4600 | 400 | 11.5 | 376 | 12.2 |
124.m88ksim | 1900 | 187 | 10.1 | 133 | 14.3 |
126.gcc | 1700 | 152 | 11.2 | 143 | 11.9 |
129.compress | 1800 | 158 | 11.4 | 130 | 13.8 |
130.li | 1900 | 223 | 8.53 | 144 | 13.2 |
132.ijpeg | 2400 | 228 | 10.5 | 223 | 10.8 |
134.perl | 1900 | 186 | 10.2 | 130 | 14.6 |
147.vortex | 2700 | 269 | 10.1 | 201 | 13.4 |
SPECint_base95 | 10.4 | ||||
SPECint95 | 13.0 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Palo Alto |
Test Date: | Apr-98 |
Hardware Avail: | Jul-98 |
Software Avail: | Oct-98 |
Hardware Information:
Model Name: | Ultra 450 |
---|---|
CPU: | 296 MHz UltraSPARC-II |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 2MB(I+D) off chip |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 2 x 4.0GB |
Other Hardware: | Fast Ethernet |
System clock frequency: 99 MHz |
Software Information:
Operating System: | Solaris 2.6 3/98 |
---|---|
Compiler: | Sun C SC5.0 EFT1 (8/98) |
File System: | UFS |
System State: | Single User |
Kernel Extensions: | consistent_coloring=1 |
Notes:
P1= -xprofile=collect:`pwd`/../feedback; P2= -xprofile=use:`pwd`/../feedback Baseline: -fast -xO5 -xarch=v8plusa Baseline: PASS1= ${P1}; PASS2= ${P2} Peak: -fast -xO4 -xarch=v8plusa -xchip=ultra 099.go: -fast -xO4 -xarch=v8plus -xrestrict -xcrossfile -W2,-O4+ansi_alias+bopt 099.go: PASS1= ${P1}; PASS2= ${P2} ${ALIGN} -dn 124.m88ksim: -fast -xO5 -xsafe=mem -xarch=v8plus -xcrossfile -xrestrict -W2,-O4+cond_elim+pde,-ldstr,-Mt8500 -Wc,-Qiselect-sw_pf_tbl_th=20 124.m88ksim: PASS1= ${P1}; PASS2= ${P2} -dn 126.gcc: -fast -xO4 -xarch=v8plus -W2,-O4+ansi_alias+cond_elim 126.gcc: PASS1= ${P1}; PASS2= ${P2} 129.compress: -fast -xO5 -xsafe=mem -xarch=v8plus -xrestrict -W2,-O4+ansi_alias+pde -Wc,-Qms_pipe+unoovf 129.compress: PASS1= ${P1}; PASS2= ${P2} -dn 130.li: PASS1= -fast -xO4 -xarch=v8plus -xcrossfile ${P1} 130.li: PASS2= -fast -xO5 -xsafe=mem -xarch=v8plus -xcrossfile -W2,-O4+ansi_alias+cond_elim+pde,-Mt350,-whole,-crit ${P2} -dn 132.ijpeg: -fast -xO5 -xsafe=mem -xarch=v8plus -W2,-O4+ansi_alias+cond_elim 132.ijpeg: PASS1= ${P1}; PASS2= ${P2} -dn 134.perl: -fast -xO4 ${CULTRA} -xcrossfile -W2,-ANSI_S,-Mp1,-O4+cond_elim -Wc,-Qiselect-sw_pf_tbl_th=30 134.perl: PASS1= ${P1}; PASS2= ${P2} -dn 147.vortex: PASS1= -fast -xO4 -xarch=v8plus -xcrossfile ${P1} 147.vortex: PASS2= -fast -xO5 -xsafe=mem -xarch=v8plus -xcrossfile ${P2} -W2,-O4+cond_elim,-Mt500,-Mr6000,-crit -dn Portability: 124.m88ksim, 132.ijpeg: -DSYSV -Xc, 126.gcc: -Dalloca=__builtin_alloca -Xc others: -Xc Shell limits: # ulimit -n 1024 or % limit descriptors 1024 Config file: ultra450_int.cfg
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Fri Aug 14 17:27:45 1998First published at SPEC.org on 04-Aug-1998