This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 3021 |
---|---|
SPECfp_rate_base95 | 2690 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 30 | 478 | 2089 | 30 | 470 | 2124 |
102.swim | 30 | 739 | 3142 | 30 | 732 | 3173 |
103.su2cor | 30 | 140 | 2708 | 30 | 138 | 2749 |
104.hydro2d | 30 | 364 | 1780 | 30 | 362 | 1791 |
107.mgrid | 30 | 320 | 2106 | 30 | 317 | 2126 |
110.applu | 30 | 512 | 1159 | 30 | 491 | 1209 |
125.turb3d | 30 | 526 | 2103 | 30 | 288 | 3839 |
141.apsi | 30 | 108 | 5244 | 30 | 96 | 5912 |
145.fpppp | 30 | 628 | 4126 | 30 | 485 | 5349 |
146.wave5 | 30 | 144 | 5633 | 30 | 133 | 6110 |
SPECfp_rate_base95 | 2690 | |||||
SPECfp_rate95 | 3021 |
Tester Information:
SPEC License #: | 6 |
---|---|
Tested By: | Sun, Menlo Park |
Test Date: | Feb-98 |
Hardware Avail: | Mar-98 |
Software Avail: | Aug-98 |
Hardware Information:
Model Name: | Sun Enterprise 6000/30 |
---|---|
CPU: | 336MHz UltraSPARC II |
FPU: | Integrated |
Number of CPU(s): | 30 |
Primary Cache: | 16KBI+16KBD on chip |
Secondary Cache: | 4MB(I+D) off chip |
Other Cache: | None |
Memory: | 8GB |
Disk Subsystem: | 4 x 4.2GB |
Other Hardware: | Fast Ethernet |
Software Information:
Operating System: | Solaris 2.6 |
---|---|
Compiler: | Sun f77 5.0 |
File System: | UFS |
System State: | Multiuser |
Notes:
STD = -fast -xarch=v8plusa INV = -Qoption iropt -O4+invccexp BCOPY = -Qoption iropt -O4+bcopy Baseline: ${STD} -fsimple=2 -xprefetch 101.tomcatv: ${STD} -xpad=local:23 -xprefetch 102.swim: ${STD} -xpad=common:15 -xprefetch -fsimple=2 103.su2cor: ${STD} -xvector -Qoption cg -Qms_pipe+nfll=5 -fsimple=2 ${BCOPY} -lmvec 104.hydro2d: ${STD} -xprefetch -Qoption iropt -O4+pde -fsimple=2 -xprofile=use 107.mgrid: ${STD} -xprefetch -fsimple=2 ${BCOPY} 110.applu: ${STD} -Qoption iropt -O4+ddint+scalarrep,-ldstr -fsimple=2 125.turb3d: ${STD} -stackvar -xpad -fsimple=2 ${INV} 141.apsi: ${STD} -fsimple=2 -stackvar -Qoption iropt -Si36 ${INV} -Qoption iropt -O4+algassoc 145.fpppp: ${STD} -xO5 -xsafe=mem -fsimple=2 -Qoption iropt -O4+algassoc -xprofile=use 146.wave5: ${STD} -stackvar -fsimple=2 -Qoption iropt -O4+unroll ${BCOPY}
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Wed Apr 29 15:13:57 PDT 1998First published at SPEC.org on 17-Mar-1998