SPECint95

SGI

Octane

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
099.go	4600	345	13.3	326	14.1
124.m88ksim	1900	161	11.8	135	14.1
126.gcc	1700	141	12.0	136	12.5
129.compress	1800	130	13.9	130	13.9
130.li	1900	161	11.8	160	11.9
132.ijpeg	2400	200	12.0	190	12.6
134.perl	1900	116	16.4	116	16.4
147.vortex	2700	196	13.7	196	13.8
SPECint_base95			13.0
		SPECint95			13.6

Tester Information:

SPEC License #:	04
Tested By:	SGI
Test Date:	Feb-98
Hardware Avail:	Mar-98
Software Avail:	Sep-97

Hardware Information:

Model Name:	Octane 1X 250MHz R10k
CPU:	250 MHz MIPS R10000 Processor Chip Revision: 3.1
FPU:	MIPS R10010 Floating Point Chip Revision: 0.0
Number of CPU(s):	1
Primary Cache:	32KBI + 32KBD on chip
Secondary Cache:	1MB (I+D)
Other Cache:	None
Memory:	128MB
Disk Subsystem:	1 SCSI 4.3GB
Other Hardware:	None

Software Information:

Operating System:	IRIX64 6.4
Compiler:	MIPSpro C Compiler 7.2
	IRIX Development Foundation 1.0 w/patch2687
File System:	XFS
System State:	Single-User

Notes:

Portability Flags: all: -DUSG  gcc: -I./config -Dalloca=__builtin_alloca
FEEDBACK:
.   PASS1 = -fb_create /tmp/FBDIR/$        where $ is the program name
.   PASS2 = -fb_opt /tmp/FBDIR/$           where $ is the program name
Base Flags: -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
Peak Flags:
go:       -O2 -n32 -mips4 -IPA:plimit=1000:small_pu=60:use_intrinsic \
.         -TARG:platform=ip27 -OPT:Olimit=0 -OPT:goto=off, FEEDBACK
m88ksim:  -O2 -n32 -mips4 -TARG:platform=ip27 -IPA:plimit=4000:space=100:small_pu=90:use_intrinsic \
.         -OPT:Olimit=0:fast_bit_intrinsics=on:ro=3:goto=off, FEEDBACK
gcc:      -Ofast=ip27 -IPA:use_intrinsic:callee_limit=1500:plimit=750:space=120:clone=on -OPT:fast_bit_intrinsics=on \
.         -LNO:fission=1:pwr2=off:prefetch=0 -OPT:ieee_arith=3, FEEDBACK
compress: -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
li:       -Ofast=ip27 -IPA:use_intrinsic:min_hot=12:callee_limit=750:plimit=12000 \
.         -IPA:space=200:clone=on:aggr_cprop=on -OPT:goto=off, FEEDBACK
ijpeg:    -Ofast=ip27 -LNO:fission=0:interchange=off:pf2=0:ou_max=2 -OPT:unroll_analysis=off:unroll_size=480:ieee_arith=3 \
.         -IPA:use_intrinsic:callee_limit=950:plimit=730:space=130:clone=on -OPT:goto=off, FEEDBACK
perl:     -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
vortex:   -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 17-Mar-1998