SPECint95

Compaq Computer Corporation

Compaq Professional Workstation 6000

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
099.go	4600	397	11.6	397	11.6
124.m88ksim	1900	161	11.8	161	11.8
126.gcc	1700	145	11.7	145	11.7
129.compress	1800	180	10.0	180	10.0
130.li	1900	152	12.5	152	12.5
132.ijpeg	2400	204	11.8	204	11.8
134.perl	1900	139	13.6	139	13.6
147.vortex	2700	190	14.2	190	14.2
SPECint_base95			12.1
		SPECint95			12.1

Tester Information:

SPEC License #:	10
Tested By:	Compaq
Test Date:	Oct-97
Hardware Avail:	Dec-97
Software Avail:	Oct-97

Hardware Information:

Model Name:	Compaq Professional Workstation 6000
CPU:	300MHz Pentium II processor
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	16KBI+16KBD
Secondary Cache:	512KB(I+D) ECC
Other Cache:	None
Memory:	128MB EDO
Disk Subsystem:	1x2.1GB 7200 RPM F/W SCSI-2
Other Hardware:	None

Software Information:

Operating System:	Microsoft Windows NT 4.0 with Service Pack 3
Compiler:	Intel C 2.4 for NT, Microsoft Visual C++ 4.2
File System:	FAT
System State:	Default

Notes:

Base and peak flags are the same and use Feedback Directed Optimization
Pass1: -G6 -Qipo -Qprof_gen -Qprof_dir c:/temp/IRCDB
Pass2: -G6 -Qipo -Qprof_use -Qprof_dir c:/temp/IRCDB 
-prof_dir is a location flag and not an optimization flag
Portability: 124:-DNT -DLEHOST  125: -Qlowercase 
Portability: 126: -D__TURBOC__ -D_MSDOS -D__STDC__=0 -DONLY_INT_FIELDS=0 -Dalloca=_alloca -DDeleteFile=remove
Portability: 132: -DMSDOS 
Portability: 134: -DMSDOS -DI_TIME

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 23-Dec-1997