This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp95 | 23.0 |
---|---|
SPECfp_base95 | 20.1 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
101.tomcatv | 3700 | 116 | 31.9 | 116 | 31.9 |
102.swim | 8600 | 336 | 25.6 | 169 | 51.0 |
103.su2cor | 1400 | 97.7 | 14.3 | 96 | 14.5 |
104.hydro2d | 2400 | 224 | 10.7 | 212 | 11.3 |
107.mgrid | 2500 | 149 | 16.8 | 132 | 18.9 |
110.applu | 2200 | 146 | 15.0 | 145 | 15.2 |
125.turb3d | 4100 | 258 | 15.9 | 235 | 17.4 |
141.apsi | 2100 | 105 | 19.9 | 96 | 21.9 |
145.fpppp | 9600 | 275 | 34.9 | 227 | 42.3 |
146.wave5 | 3000 | 96.1 | 31.2 | 90 | 33.2 |
SPECfp_base95 | 20.1 | ||||
SPECfp95 | 23.0 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Jun-97 |
Hardware Avail: | Jul-97 |
Software Avail: | Jul-96 |
Hardware Information:
Model Name: | HP 9000 Model K570 1-CPU |
---|---|
CPU: | 200MHz PA-RISC 8200 |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 2MBI+2MBD off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 1 FWD SCSI-2 2.0GB |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP-UX f77 970521 B.10.20.09 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
Base Flags: All: +Oall +Odataprefetch Linker Flag: All: -Wl,-aarchive Peak Flags: 101: +Oall +Odataprefetch 102: +O4 +Ocachepadcommon +Odataprefetch +Oloop_unroll 103: +O2 +Odataprefetch +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit 104: +Oall +Odataprefetch +Oloop_unroll +Owhole_program_mode 107: +O3 +Odataprefetch +Oinline_budget=1000000 +Oloop_unroll +Onofltacc +Onolimit 110: +O3 +Odataprefetch +Oloop_unroll +Onofltacc 125: +O3 +Ocachepadcommon +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll 141: +Oall 145: +O4 +Oinline_budget=1000000 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +Ovectorize +I +P 146: +O3 +Odataprefetch +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl,-aarchive The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Jul 8 8:27:01 PDT 1997First published at SPEC.org on 08-Jul-1997