This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp95 | 11.7 |
|---|---|
| SPECfp_base95 | 11.5 |
| Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|
| 101.tomcatv | 3700 | 181 | 20.5 | 175 | 21.1 |
| 102.swim | 8600 | 358 | 24.0 | 294 | 29.3 |
| 103.su2cor | 1400 | 184 | 7.61 | 172 | 8.15 |
| 104.hydro2d | 2400 | 361 | 6.65 | 353 | 6.80 |
| 107.mgrid | 2500 | 251 | 9.95 | 252 | 9.92 |
| 110.applu | 2200 | 293 | 7.52 | 297 | 7.41 |
| 125.turb3d | 4100 | 490 | 8.36 | 469 | 8.74 |
| 141.apsi | 2100 | 188 | 11.2 | 202 | 10.4 |
| 145.fpppp | 9600 | 633 | 15.2 | 638 | 15.0 |
| 146.wave5 | 3000 | 196 | 15.3 | 208 | 14.4 |
| SPECfp_base95 | 11.5 | ||||
| SPECfp95 | 11.7 | ||||
Tester Information:
| SPEC License #: | 6 |
|---|---|
| Tested By: | Sun, Mountain View |
| Test Date: | Nov-96 |
| Hardware Avail: | Jan-97 |
| Software Avail: | Nov-96 |
Hardware Information:
| Model Name: | Ultra Enterprise 4001 |
|---|---|
| CPU: | 250MHz UltraSPARC II |
| FPU: | integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 16KBI+16KBD on chip |
| Secondary Cache: | 1024KB(I+D) off chip |
| Other Cache: | None |
| Memory: | 3GB |
| Disk Subsystem: | 2 x 2GB |
| Other Hardware: | Fast Ethernet |
Software Information:
| Operating System: | Solaris 2.5.1 |
|---|---|
| Compiler: | Sun f77 4.2 alpha |
| File System: | UFS |
| System State: | Multiuser |
Notes:
Baseline: -fast -xO5 -xdepend -xarch=v8plusa
Peak: FULTRA= -xarch=v8plusa -xchip=ultra -Qoption cg -Qiselect-funcalign=32,-Qicache-L1-bsize=4-bbits=7
101.tomcatv: -fast -xO4 -xdepend ${FULTRA} -xpad=local -xpad=common
102.swim: -fast -xO4 -xdepend ${FULTRA} -xpad=local -xpad=common -dn
103.su2cor: -fast -xO4 -xdepend -xtarget=ultra -xarch=v8plusa -Qoption iropt -O4+vector -Qoption cg -Qms_pipe+nfll=5 -lmvec -dn
104.hydro2d: -fast -xO5 -xdepend -xarch=v8plusa -xsafe=mem -Qoption iropt -O4+pde ${FULTRA} -xprofile=use
107.mgrid: -fast -xO4 -xdepend -xtarget=ultra -xarch=v8plus
110.applu: -fast -xO5 -xdepend ${FULTRA} -dn -xprofile=use
125.turb3d: -fast -xO5 -xdepend -xsafe=mem -xpad=local -xpad=common ${FULTRA} -xprofile=use
141.apsi: -fast -xO4 -xdepend -xarch=v8plus -fsimple=2 -dn
145.fpppp: -fast -xO5 -xdepend -xsafe=mem ${FULTRA} -dn -xprofile=use
146.wave5: -fast -xO4 -xdepend -xarch=v8plus -xprofile=use
Config Version @(#)grover1003.cfg 1.59 96/07/23
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Jan 7 15:10:21 PST 1997First published at SPEC.org on 07-Jan-1997