This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 157 |
---|---|
SPECfp_rate_base95 | 151 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 2 | 289 | 230 | 2 | 278 | 239 |
102.swim | 2 | 440 | 351 | 2 | 395 | 391 |
103.su2cor | 2 | 307 | 82.1 | 2 | 317 | 79.5 |
104.hydro2d | 2 | 553 | 78.1 | 2 | 541 | 79.9 |
107.mgrid | 2 | 436 | 103 | 2 | 357 | 126 |
110.applu | 2 | 436 | 90.9 | 2 | 434 | 91.2 |
125.turb3d | 2 | 581 | 127 | 2 | 558 | 132 |
141.apsi | 2 | 222 | 170 | 2 | 225 | 168 |
145.fpppp | 2 | 781 | 221 | 2 | 782 | 221 |
146.wave5 | 2 | 207 | 261 | 2 | 205 | 264 |
SPECfp_rate_base95 | 151 | |||||
SPECfp_rate95 | 157 |
Tester Information:
SPEC License #: | 3 |
---|---|
Tested By: | HP Cupertino, CA |
Test Date: | Aug-96 |
Hardware Avail: | Feb-96 |
Software Avail: | Sep-96 |
Hardware Information:
Model Name: | HP 9000 Model K420 2-CPU |
---|---|
CPU: | 120 MHz PA-RISC 7200 |
FPU: | Integrated |
Number of CPU(s): | 2 |
Primary Cache: | 1MBI+1MBD off-chip |
Secondary Cache: | None |
Other Cache: | None |
Memory: | 512MB |
Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
Other Hardware: | None |
Software Information:
Operating System: | HP-UX B.10.20 |
---|---|
Compiler: | HP FORTRAN B3906AA B.10.20.01 |
File System: | HP-UX |
System State: | Multi-user |
Notes:
Base Flags: All: +Oall Linker Flag: All: -Wl, -a,archive Peak Flags: 101: +Oall +Oloop_unroll +Onolimit +Oregionsched +Ovectorize +DC7200 +I/+P 102: +Oall +Ocache_pad_common +Odataprefetch +Ofltacc +Oinline_budget=256000 +Olibcalls +Oloop_transform +DC7200 +I/+P +Onofastaccess +Onoinitcheck +Onoloop_unroll +Onosize +Oregionsched +I/+P 103: +Oall +Ofastaccess +Olibcalls +Oloop_unroll +Onofltacc +Onolimit +I/+P 104: +Oall +Oloop_unroll +Owhole_program_mode +I/+P 107: +O3 +Oinline_budget=256000 +Oloop_unroll +Onofltacc +Onolimit 110: +Oall +Onofastaccess 125: +O3 +Olibcalls +Onofltacc +Onolimit +Onoloop_unroll +DC7200 141: +Oall +Onofastaccess +DC7200 145: +Oall 146: +O3 +Olibcalls +Oloop_unroll +Onofltacc +Onolimit Linker Flag: All: -Wl, -a,archive Note: The +I/+P indicates the use of profile based optimization.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Wed Sep 25 17:26:48 PDT 1996First published at SPEC.org on 17-Sep-1996