SPECfp95

Hewlett-Packard

HP 9000 Model K420 4-CPU

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	152	24.3	151	24.5
102.swim	8600	155	55.5	155	55.5
103.su2cor	1400	95.2	14.7	94	14.9
104.hydro2d	2400	185	13.0	185	13.0
107.mgrid	2500	123	20.3	120	20.7
110.applu	2200	381	5.77	381	5.77
125.turb3d	4100	743	5.52	693	5.91
141.apsi	2100	382	5.50	240	8.76
145.fpppp	9600	847	11.3	704	13.6
146.wave5	3000	149	20.2	143	21.0
SPECfp_base95			13.6
		SPECfp95			14.7

Tester Information:

SPEC License #:	3
Tested By:	HP Cupertino, CA
Test Date:	Oct-95
Hardware Avail:	Feb-96
Software Avail:	Aug-95

Hardware Information:

Model Name:	HP 9000 Model K420 4-CPU
CPU:	120 MHz PA-RISC 7200
FPU:	Integrated
Number of CPU(s):	4
Primary Cache:	1MBI+1MBD off-chip
Secondary Cache:	None
Other Cache:	None
Memory:	512MB
Disk Subsystem:	1 Fast/Wide SCSI-2 1.0 GB
Other Hardware:	Ethernet

Software Information:

Operating System:	HP-UX B.10.01
Compiler:	FORTRAN B3906AA B.10.00.01.00
File System:	HP-UX
System State:	Multi-user
Kernel Extensions:	Increased: maxdsiz, maxssiz

Notes:

BASE:
All: +Oall +Onofastaccess +DAK400 +Oparallel

PEAK:
101 - 125: +Oall +Onofastaccess +DAK400 +Oparallel
141: +Oall +Onolimit +Oparallel +P
145: +O2 +DAK400 +P
146: +Oall +DAK400 +Oparallel +P
Loader Flag: All: -Wl,-a,archive

Note: The +P indicates the use of Profile Based Optimization

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 20-Feb-1996