This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
| SPECfp95 | 8.24 |
|---|---|
| SPECfp_base95 | 8.24 |
| Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
|---|---|---|---|---|---|
| 101.tomcatv | 3700 | 266 | 13.9 | 266 | 13.9 |
| 102.swim | 8600 | 398 | 21.6 | 398 | 21.6 |
| 103.su2cor | 1400 | 296 | 4.73 | 296 | 4.73 |
| 104.hydro2d | 2400 | 532 | 4.51 | 532 | 4.51 |
| 107.mgrid | 2500 | 440 | 5.68 | 440 | 5.68 |
| 110.applu | 2200 | 490 | 4.49 | 490 | 4.49 |
| 125.turb3d | 4100 | 732 | 5.60 | 732 | 5.60 |
| 141.apsi | 2100 | 233 | 9.00 | 233 | 9.00 |
| 145.fpppp | 9600 | 787 | 12.2 | 787 | 12.2 |
| 146.wave5 | 3000 | 209 | 14.3 | 209 | 14.3 |
| SPECfp_base95 | 8.24 | ||||
| SPECfp95 | 8.24 | ||||
Tester Information:
| SPEC License #: | 3 |
|---|---|
| Tested By: | HP Cupertino, CA |
| Test Date: | Oct-95 |
| Hardware Avail: | Jan-96 |
| Software Avail: | Aug-95 |
Hardware Information:
| Model Name: | HP 9000 Model K420 |
|---|---|
| CPU: | 120 MHz PA-RISC 7200 |
| FPU: | Integrated |
| Number of CPU(s): | 1 |
| Primary Cache: | 1MBI+1MBD off-chip |
| Secondary Cache: | None |
| Other Cache: | None |
| Memory: | 512MB |
| Disk Subsystem: | 1 Fast/Wide SCSI-2 1.0 GB |
| Other Hardware: | Ethernet |
Software Information:
| Operating System: | HP-UX B.10.01 |
|---|---|
| Compiler: | FORTRAN B3906AA B.10.00.01.00 |
| File System: | HP-UX |
| System State: | Multi-user |
| Kernel Extensions: | Increased: maxdsiz, maxssiz |
Notes:
BASE: All: +Oall +Onofastaccess +DAK400 -Wl,-a,archive PEAK: Same as BASE.
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Feb 27 2:04:29 PST 1996First published at SPEC.org on 20-Feb-1996