Hewlett-Packard
HP 9000 Model J200 Multiprocessor
| SPECfp95
| 8.50
|
|---|
| SPECfp_base95
| 8.12
|
|---|
| Benchmark # and Name
| Reference Time
| Base Run Time
| Base SPEC Ratio
| Peak Run Time
| Peak SPEC Ratio
|
| 101.tomcatv
| 3700 | 222 | 16.7 | 221 | 16.7
|
| 102.swim
| 8600 | 285 | 30.2 | 285 | 30.2
|
| 103.su2cor
| 1400 | 294 | 4.76 | 294 | 4.76
|
| 104.hydro2d
| 2400 | 394 | 6.09 | 395 | 6.08
|
| 107.mgrid
| 2500 | 307 | 8.15 | 307 | 8.15
|
| 110.applu
| 2200 | 518 | 4.25 | 519 | 4.24
|
| 125.turb3d
| 4100 | 855 | 4.79 | 852 | 4.81
|
| 141.apsi
| 2100 | 475 | 4.42 | 350 | 6.00
|
| 145.fpppp
| 9600 | 1017 | 9.44 | 854 | 11.2
|
| 146.wave5
| 3000 | 245 | 12.2 | 249 | 12.0
|
| SPECfp_base95
| 8.12
|
|
|
| SPECfp95
| 8.50
|
Tester Information:
| SPEC License #:
| 3
|
|---|
| Tested By: | HP Cupertino, CA
|
|---|
| Test Date:
| Aug-95
|
|---|
| Hardware Avail:
| Aug-95
|
|---|
| Software Avail:
| Aug-95
|
|---|
Hardware Information:
| Model Name:
| J200 Multiprocessor
|
| CPU:
| 100 MHz PA-RISC 7200
|
| FPU:
| Integrated
|
| Number of CPU(s):
| 2
|
| Primary Cache:
| 256KBI+256KBD off-chip
|
| Secondary Cache:
| None
|
| Other Cache:
| None
|
| Memory:
| 256MB
|
| Disk Subsystem:
| 1 Fast/Wide SCSI-2 1.0 GB
|
| Other Hardware:
| Ethernet
|
Software Information:
| Operating System:
| HP-UX B.10.01
|
| Compiler:
| FORTRAN B3906AA B.10.00.01.00
|
| File System:
| HP-UX
|
| System State:
| Multi-user
|
Notes:
Linker Flags: -Wl,-aarchive
Baseline Flags: +Oall +Onofastaccess +Oparallel
Peak Flags: same as baseline unless otherwise noted.
141.apsi: +P +Oall +Onolimit
145.fpppp: +P +O2
146.wave5: +P +Oall +Oparallel
+P indicates feedback directed optimization was used.
If you wish to print this information we highly recommend using the
postscript reporting page.
This page was generated with runspec 95.55.
- For more information contact:
- SPEC
10754 Ambassador Drive, Suite 201
Manassas, VA, 22110