SPEC Benchmark CINT95 Summary Base Base Base Peak Peak Peak Benchmarks Ref Time Run Time Ratio Ref Time Run Time Ratio ------------ -------- -------- -------- -------- -------- -------- 099.go 4600 171 26.8 4600 174 26.4 124.m88ksim 1900 79.5 23.9 1900 77.4 24.5 126.gcc 1700 79.4 21.4 1700 78.8 21.6 129.compress 1800 85.2 21.1 1800 75.7 23.8 130.li 1900 94.5 20.1 1900 86.3 22.0 132.ijpeg 2400 99.6 24.1 2400 101 23.7 134.perl 1900 118 16.1 1900 87.9 21.6 147.vortex 2700 118 23.0 2700 109 24.7 SPECint_base95 (Geom. Mean) 21.8 SPECint95 (Geom. Mean) 23.5 TESTER INFORMATION ------------------ SPEC License #: 11 Tested By: IBM, Austin, TX Test Date: Jun-2000 Hardware Avail: Aug-2000 Software Avail: Jul-2000 HARDWARE -------- Model Name: RS/6000 SP-375MHz High Node (1 CPU) CPU: 375 MHz POWER3-II FPU: Integrated Number of CPU(s): 1 Primary Cache: 32KBI+64KBD (on chip) Secondary Cache: 8MB unified (off chip, per CPU) Other Cache: None Memory: 32GB Disk Subsystem: 2x18GB SCSI, 7200RPM Other Hardware: Ethernet SOFTWARE -------- Operating System: AIX 4.3.3 plus beta of APAR IY11202 Compiler: IBM C/C++ 3.6.4.0 memdbg 4.4.0.1 FDPR File System: AIX/JFS System State: Multi-user NOTES ------- Compatibility Flags: gcc -ma; perl -DI_TIME -DI_SYS_TIME Base: -O4 -Q=500 -qpdf1/pdf2 -lhmu go: -O -qarch=pwr3 -Q=500 -qansialias -qdatalocal -qassert=addr -qcompact -bnso -bI:/lib/syscalls.exp m88: -O3 -qarch=ppc -qipa=noobject -Q=500 -qansialias -qpdf1/pdf2 gcc: -O -qarch=ppc -qdatalocal -qassert=addr -qinlglue -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp comp: -O -qarch=ppc -qipa=level=2:noobject -qdatalocal -Q=200 -qassert=allp -qunroll=5 li: -O4 -qipa=noobject -qlibansi -qpdf1/pdf2; fdpr -R3 ijpeg: -O4 -qipa=noobject -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp perl: -O4 -qipa=noobject -Q=200 -qinlglue -Dsetjmp=_setjmp -Dlongjmp=_longjmp -qansialias -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp /usr/ccs/lib/bmalloc.o vort: -O4 -qipa=level=2:noobject -Q=500 -qpdf1/pdf2 -lhm -lhu; fdpr -R2 NOTE: 16 CPUs were installed, but 15 were disabled via the service processor setup menu.