SPECint95

SGI

SGI 2200: 2X 400MHz R12k

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
099.go	4600	208	22.1	199	23.1
124.m88ksim	1900	82.1	23.1	79	24.2
126.gcc	1700	72.4	23.5	73	23.4
129.compress	1800	78.0	23.1	77	23.4
130.li	1900	105	18.1	102	18.6
132.ijpeg	2400	114	21.0	112	21.5
134.perl	1900	69.3	27.4	69	27.4
147.vortex	2700	76.7	35.2	77	35.2
SPECint_base95			23.8
		SPECint95			24.2

Tester Information:

SPEC License #:	04
Tested By:	SGI
Test Date:	Apr-2000
Hardware Avail:	Jun-2000
Software Avail:	Apr-2000

Hardware Information:

Model Name:	SGI 2200: 2X 400MHz R12k
CPU:	400 MHz MIPS R12000 Processor Chip Revision: 3.5
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	32KBI + 32KBD on chip
Secondary Cache:	8MB (I+D)
Other Cache:	None
Memory:	1024MB
Disk Subsystem:	2x SCSI 9GB (striped)
Other Hardware:	none

Software Information:

Operating System:	IRIX64 6.5.8
Compiler:	MIPSpro C Compiler 7.3.1.1m
	IRIX Development Foundation 1.2
File System:	XFS
System State:	Single-User

Notes:

Portability Flags: all: -DUSG  gcc: -Dalloca=__builtin_alloca
FEEDBACK:
.   PASS1 = -fb_create /tmp/FBDIR/$(EXENAME)
.   PASS2 = -fb_opt /tmp/FBDIR/$(EXENAME)
Base Flags: -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
Peak Flags:
go:       -O2 -n32 -mips4 -IPA:plimit=1000:small_pu=60:use_intrinsic \
.         -TARG:platform=ip27 -OPT:Olimit=0 -OPT:goto=off, FEEDBACK
m88ksim:  -O2 -TARG:platform=ip27 -IPA:plimit=4000:space=100:small_pu=90:use_intrinsic \
.         -OPT:Olimit=0:ro=3:goto=off:unroll_times_max=32:unroll_size=300, FEEDBACK
gcc:      -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
compress: -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
li:       -Ofast=ip27 -IPA:use_intrinsic:min_hot=12:callee_limit=750:plimit=12000 \
.         -IPA:space=200:clone=on:aggr_cprop=on -OPT:goto=off, FEEDBACK
ijpeg:    -Ofast=ip27 -LNO:fission=0:interchange=off:pf2=0:ou_max=2 -OPT:unroll_analysis=off:unroll_size=480:ieee_arith=3 \
.         -IPA:use_intrinsic:callee_limit=950:plimit=730:space=130:clone=on -OPT:goto=off, FEEDBACK
perl:     -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
vortex:   -Ofast=ip27 -IPA:use_intrinsic, FEEDBACK
.
Large pages were enabled for base and peak using:
.  systune -i ;  percent_totalmem_1m_pages = 50 ; nlpages_1m = 200
.  setenv PAGESIZE_DATA 1024

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

First published at SPEC.org on 23-May-2000