SPECfp95

IBM Corporation

RS/6000 Model 7026-M80 (1 CPU)

This result has been submitted to SPEC, see the disclaimer before studying any results.

If you wish to print this information we highly recommend using the postscript reporting page.

SPECfp95	29.1
SPECfp_base95	28.5

Benchmark # and Name Reference Time Base Run Time Base SPEC Ratio Peak Run Time Peak SPEC Ratio
101.tomcatv 3700 116 31.9 116 31.9
102.swim 8600 211 40.7 198 43.4
103.su2cor 1400 64.7 21.7 62 22.4
104.hydro2d 2400 148 16.2 149 16.1
107.mgrid 2500 102 24.5 101 24.8
110.applu 2200 123 17.9 124 17.8
125.turb3d 4100 129 31.8 131 31.4
141.apsi 2100 78.7 26.7 77 27.4
145.fpppp 9600 176 54.5 165 58.1
146.wave5 3000 77.7 38.6 75 40.1
SPECfp_base95 28.5
SPECfp95 29.1

Benchmark # and Name	Reference Time	Base Run Time	Base SPEC Ratio	Peak Run Time	Peak SPEC Ratio
101.tomcatv	3700	116	31.9	116	31.9
102.swim	8600	211	40.7	198	43.4
103.su2cor	1400	64.7	21.7	62	22.4
104.hydro2d	2400	148	16.2	149	16.1
107.mgrid	2500	102	24.5	101	24.8
110.applu	2200	123	17.9	124	17.8
125.turb3d	4100	129	31.8	131	31.4
141.apsi	2100	78.7	26.7	77	27.4
145.fpppp	9600	176	54.5	165	58.1
146.wave5	3000	77.7	38.6	75	40.1
SPECfp_base95	28.5
	SPECfp95	29.1

Tester Information:

SPEC License #: 11
Tested By: IBM, Austin, TX
Test Date: Apr-2000
Hardware Avail: Jun-2000
Software Avail: May-2000

SPEC License #:	11
Tested By:	IBM, Austin, TX
Test Date:	Apr-2000
Hardware Avail:	Jun-2000
Software Avail:	May-2000

Hardware Information:

Model Name: RS/6000 Model 7026-M80 (1 CPU)
CPU: 500MHz IBM PowerPC RS64-III
FPU: Integrated
Number of CPU(s): 1
Primary Cache: 128KBI+128KBD on chip
Secondary Cache: 4MB(I+D) (off chip,per CPU)
Other Cache: None
Memory: 4GB
Disk Subsystem: 2x9.1GB Ultra SCSI, 7200 RPM
Other Hardware: None

Model Name:	RS/6000 Model 7026-M80 (1 CPU)
CPU:	500MHz IBM PowerPC RS64-III
FPU:	Integrated
Number of CPU(s):	1
Primary Cache:	128KBI+128KBD on chip
Secondary Cache:	4MB(I+D) (off chip,per CPU)
Other Cache:	None
Memory:	4GB
Disk Subsystem:	2x9.1GB Ultra SCSI, 7200 RPM
Other Hardware:	None

Software Information:

Operating System: AIX 4.3.3 plus APAR IY09807
Compiler: XL Fortran version 6.1.0.0
KAP version 3.2
VAST-2 version 4.01X8
File System: AIX/JFS
System State: Multi-user

Operating System:	AIX 4.3.3 plus APAR IY09807
Compiler:	XL Fortran version 6.1.0.0
	KAP version 3.2
	VAST-2 version 4.01X8
File System:	AIX/JFS
System State:	Multi-user

Notes:

Base: -O4 -qipa=level=2 -qarch=pwr3 -lmass
Peak:
101: -O4 -qarch=pwr3 -qipa=level=2 -lmass
102: -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2:noobject -qhot -qstrict -qpdf1/pdf2 -lmass
103: -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2:noobject -qhot=arraypad=44
.    -Pv -Wp,-ew,-o -lmass -bnso -bI:/lib/syscalls.exp
104: -O4 -qipa=level=2 -qarch=pwr3 -lmass
107: -O4 -qipa=level=2 -qarch=pwr3 -lmass
110: -O4 -qarch=pwr3 -qipa=level=2:noobject -lmass
125: -O3 -qarch=pwr3 -qtune=pwr3 -qipa=level=2:noobject -qnosave -lmass
141: -O3 -qhot -qtbtable=none -qarch=rs64b -qnosave -Pk -Wp,-r=2,-ag=b,-f
.    -lmass -bnso -bI:/lib/syscalls.exp
145: -O3 -Q -Pv -Wp,-ea27,-o -1 -qnosave -qmaxmem=-1 -qpdf1/2 -lmass
.    -bnso -bI:/lib/syscalls.exp
146: -O3 -qarch=pwr3 -Pk -Wp,-ag=a,-f -qxlf77=nopersistent -lmass
.    -bnso -bI:/lib/syscalls.exp
NOTE: 8 CPUs were installed, but 7 were disabled via the service 
.    processor setup menu.

Go To: [Home] [OSG] [CPU95] [Results]

This page was generated with rawformat (cd01-open).

[email protected]

Tue May 23 14:09:07 2000

First published at SPEC.org on 23-May-2000