This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECfp_rate95 | 11779 |
---|---|
SPECfp_rate_base95 | 10391 |
Benchmark # and Name | Base # Copies | Base Run Time | Base SPEC Ratio | Peak # Copies | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|---|
101.tomcatv | 32 | 91.5 | 11651 | 32 | 70 | 15147 |
102.swim | 32 | 134 | 18475 | 32 | 124 | 19943 |
103.su2cor | 32 | 82.5 | 4888 | 32 | 57 | 7134 |
104.hydro2d | 32 | 99.8 | 6927 | 32 | 96 | 7198 |
107.mgrid | 32 | 70.5 | 10209 | 32 | 72 | 10059 |
110.applu | 32 | 97.8 | 6477 | 32 | 94 | 6754 |
125.turb3d | 32 | 137 | 8612 | 32 | 91 | 13034 |
141.apsi | 32 | 49.5 | 12208 | 32 | 51 | 11971 |
145.fpppp | 32 | 136 | 20256 | 32 | 127 | 21736 |
146.wave5 | 32 | 60.4 | 14305 | 32 | 60 | 14391 |
SPECfp_rate_base95 | 10391 | |||||
SPECfp_rate95 | 11779 |
Tester Information:
SPEC License #: | 2 |
---|---|
Tested By: | Compaq NH |
Test Date: | Feb-2000 |
Hardware Avail: | May-1999 |
Software Avail: | Dec-1999 |
Hardware Information:
Model Name: | AlphaServer HPC320 Model 6/500 |
---|---|
CPU: | 500 MHz 21264 |
FPU: | Integrated |
Number of CPU(s): | 32, 8 nodes x 4 each |
Primary Cache: | 64KB(I)+64KB(D) on chip |
Secondary Cache: | 4MB off chip per cpu |
Other Cache: | none |
Memory: | Nodes 0-6 @ 4GB, 6-7 @ 16GB |
Disk Subsystem: | 24x9GB (10,000 RPM) |
4x sw stripe x 6x RAID0 hw stripe | |
2 HSG80 controllers | |
Other Hardware: | Ethernet |
Software Information:
Operating System: | Digital UNIX X4.0F |
---|---|
Compiler: | Fortran V5.3 |
KAP Fortran V4.2 | |
File System: | UFS |
System State: | Multi User |
Notes:
base: kf77 -arch ev6 -O5 -transform_loops -fkapargs='-ur=1' tomcatv: kf90 -arch ev6 -O5 -inline none . -fkapargs='-fuselevel=2 -ur=9 -ur2=460 -ur3=30 ' swim: kf77 -arch ev6 -O5 -fkapargs='-ag=a -fuselevel=2 -ur=1' su2cor: kf90 -arch ev6 -O3 -transform_loops -automatic . -fkapargs=' -ag=abfg -r=0 -nointerleave -ur2=260 ' hydro2d: kf90 -arch ev6 -O5 -fkapargs='-fuselevel=2 -ur2=860' mgrid: kf77 -arch ev6 -O5 -speculate all -fkapargs='-fuselevel=2 -ur=1' applu: kf90 -arch ev6 -transform_loops -automatic -fkapargs=' -r=2 -o=0 -ur2=60 ' turb3d: kf90 -arch ev6 -O5 -speculate all -automatic . -fkapargs=' -ag=a -o=1 -ur2=760 -ur3=100 ' apsi: kf90 -arch ev6 -O2 -pipeline -automatic . -fkapargs=' -fuselevel=2 -ur=8 -ur2=60 ' fpppp: kf90 -arch ev6 -O2 -transform_loops -fkapargs='-so=0 -o=0' wave5: kf90 -arch ev6 -O5 -transform_loops -unroll 15 . -fkapargs='-r=1 -o=2 -ur2=260 -ur3=30' submitnnn = rsh <node> "cd %dir%; runon <cpu> %command% && exit 0"
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Thu Apr 27 18:32:35 2000First published at SPEC.org on 25-Apr-2000