This result has been submitted to SPEC, see the disclaimer before studying any results.
If you wish to print this information we highly recommend using the postscript reporting page.
SPECint95 | 19.8 |
---|---|
SPECint_base95 | 18.6 |
Benchmark # and Name | Reference Time | Base Run Time | Base SPEC Ratio | Peak Run Time | Peak SPEC Ratio |
---|---|---|---|---|---|
099.go | 4600 | 229 | 20.1 | 252 | 18.2 |
124.m88ksim | 1900 | 86.4 | 22.0 | 84 | 22.6 |
126.gcc | 1700 | 95.2 | 17.9 | 93 | 18.2 |
129.compress | 1800 | 98.8 | 18.2 | 87 | 20.6 |
130.li | 1900 | 104 | 18.4 | 95 | 20.1 |
132.ijpeg | 2400 | 112 | 21.5 | 114 | 21.0 |
134.perl | 1900 | 131 | 14.5 | 97 | 19.6 |
147.vortex | 2700 | 153 | 17.6 | 143 | 18.8 |
SPECint_base95 | 18.6 | ||||
SPECint95 | 19.8 |
Tester Information:
SPEC License #: | 11 |
---|---|
Tested By: | IBM, Austin, TX |
Test Date: | Dec-1999 |
Hardware Avail: | Feb-2000 |
Software Avail: | Feb-2000 |
Hardware Information:
Model Name: | RS/6000 44P-170 (333 MHz) |
---|---|
CPU: | 333 MHz Power3-II |
FPU: | Integrated |
Number of CPU(s): | 1 |
Primary Cache: | 32KB I + 64KB D (on chip) |
Secondary Cache: | 1MB unified (off chip) |
Other Cache: | None |
Memory: | 512 MB |
Disk Subsystem: | 2x9.1GB IBM Fast/Wide SCSI 7200 RPM |
Other Hardware: | None |
Software Information:
Operating System: | AIX 4.3.3 |
---|---|
Compiler: | IBM C/C++ 3.6.4.0 |
memdbg 4.4.0.1 | |
FDPR | |
File System: | AIX/JFS |
System State: | Multi-user |
Notes:
Compatibility Flags: gcc -ma; perl -DI_TIME -DI_SYS_TIME Base: -O4 -Q=500 -qpdf1/pdf2 -lhmu go: -O -qarch=pwr3 -Q=500 -qansialias -qdatalocal -qassert=addr -qcompact -bnso -bI:/lib/syscalls.exp m88: -O3 -qarch=ppc -qipa=noobject -Q=500 -qansialias -qpdf1/pdf2 gcc: -O -qarch=ppc -qdatalocal -qassert=addr -qinlglue -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp comp: -O -qarch=ppc -qipa=level=2:noobject -qdatalocal -Q=200 -qassert=allp -qunroll=5 li: -O4 -qipa=noobject -qlibansi -qpdf1/pdf2; fdpr -R3 ijpeg: -O4 -qipa=noobject -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp perl: -O4 -qipa=noobject -Q=200 -qinlglue -Dsetjmp=_setjmp -Dlongjmp=_longjmp -qansialias -qunroll=4 -qpdf1/pdf2 -bnso -bI:/lib/syscalls.exp /usr/ccs/lib/bmalloc.o vort: -O4 -qipa=level=2:noobject -Q=500 -qpdf1/pdf2 -lhm -lhu; fdpr -R2
Go To: [Home] [OSG] [CPU95] [Results]
This page was generated with rawformat (cd01-open).
[email protected] Tue Feb 15 16:40:14 2000First published at SPEC.org on 15-Feb-2000