Fujitsu PRIMERGY RX2540 M6, Intel Xeon Gold 5318Y, |
SPECrate®2017_int_base = 325 |
SPECrate®2017_int_peak = Not Run |
CPU2017 License: | 19 | Test Date: | Oct-2022 |
---|---|---|---|
Test Sponsor: | Fujitsu | Hardware Availability: | Aug-2021 |
Tested by: | Fujitsu | Software Availability: | Jul-2022 |
Benchmark result graphs are available in the PDF report.
Hardware | |
---|---|
CPU Name: | Intel Xeon Gold 5318Y |
Max MHz: | 3400 |
Nominal: | 2100 |
Enabled: | 48 cores, 2 chips, 2 threads/core |
Orderable: | 1,2 chips |
Cache L1: | 32 KB I + 48 KB D on chip per core |
L2: | 1.25 MB I+D on chip per core |
L3: | 36 MB I+D on chip per chip |
Other: | None |
Memory: | 1 TB (32 x 32 GB 2Rx4 PC4-3200AA-R, running at 2933) |
Storage: | 1 x SATA M.2 SSD, 480GB |
Other: | None |
Software | |
---|---|
OS: | Red Hat Enterprise Linux release 8.2 (Ootpa) 4.18.0-193.el8.x86_64 |
Compiler: | C/C++: Version 2022.1 of Intel oneAPI DPC++/C++ Compiler for Linux; Fortran: Version 2022.1 of Intel Fortran Compiler for Linux; |
Parallel: | No |
Firmware: | Fujitsu BIOS Version V1.0.0.0 R1.16.0 for D3891-A1x. Released Aug-2022 |
File System: | xfs |
System State: | Run level 3 (multi-user) |
Base Pointers: | 64-bit |
Peak Pointers: | Not Applicable |
Other: | None |
Power Management: | BIOS and OS set to prefer performance at the cost of additional power usage |
Benchmark | Base | Peak | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | Copies | Seconds | Ratio | Seconds | Ratio | Seconds | Ratio | |
SPECrate®2017_int_base | 325 | |||||||||||||
SPECrate®2017_int_peak | Not Run | |||||||||||||
Results appear in the order in which they were run. Bold underlined text indicates a median measurement. | ||||||||||||||
500.perlbench_r | 96 | 702 | 218 | 702 | 218 | 704 | 217 | |||||||
502.gcc_r | 96 | 528 | 257 | 528 | 258 | 529 | 257 | |||||||
505.mcf_r | 96 | 300 | 518 | 299 | 519 | 299 | 518 | |||||||
520.omnetpp_r | 96 | 582 | 216 | 580 | 217 | 580 | 217 | |||||||
523.xalancbmk_r | 96 | 202 | 502 | 204 | 498 | 202 | 501 | |||||||
525.x264_r | 96 | 261 | 643 | 260 | 646 | 261 | 644 | |||||||
531.deepsjeng_r | 96 | 468 | 235 | 468 | 235 | 469 | 235 | |||||||
541.leela_r | 96 | 695 | 229 | 695 | 229 | 696 | 228 | |||||||
548.exchange2_r | 96 | 373 | 675 | 372 | 676 | 372 | 675 | |||||||
557.xz_r | 96 | 582 | 178 | 580 | 179 | 581 | 179 |
SPEC has ruled that the compiler used for this result was performing a compilation that specifically improves the performance of the 523.xalancbmk_r / 623.xalancbmk_s benchmarks using a priori knowledge of the SPEC code and dataset to perform a transformation that has narrow applicability. In order to encourage optimizations that have wide applicability (see rule 1.4 https://www.spec.org/cpu2017/Docs/runrules.html#rule_1.4), SPEC will no longer publish results using this optimization. This result is left in the SPEC results database for historical reference.
The numactl mechanism was used to bind copies to processors. The config file option 'submit' was used to generate numactl commands to bind each copy to a specific processor. For details, please see the config file.
Stack size set to unlimited using "ulimit -s unlimited" Kernel Boot Parameter set with : nohz_full=1-31 cpupower -c all frequency-set -g performance
Environment variables set by runcpu before the start of the run: LD_LIBRARY_PATH = "/home/Benchmark/speccpu/lib/intel64:/home/Benchmark/speccpu/lib/ia32:/home/Benchmark/speccpu/je5.0.1- 32" MALLOC_CONF = "retain:true"
Binaries compiled on a system with 2x Intel Xeon Platinum 8280M CPU + 384GB RAM memory using Red Hat Enterprise Linux 8.4 Transparent Huge Pages enabled by default Prior to runcpu invocation Filesystem page cache synced and cleared with: sync; echo 3> /proc/sys/vm/drop_caches runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu <etc> NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented.
BIOS configuration: DCU Streamer Prefetcher = Disabled CPU C1E Support = Disabled Package C State Limit = C2 UPI Link Frequency Select = 10.4 GT/s XPT Prefetch = Enabled LLC Prefetch = Enabled UPI Prefetch = Disabled FAN Control = Full Sysinfo program /home/Benchmark/speccpu/bin/sysinfo Rev: r6622 of 2021-04-07 982a61ec0915b55891ef0e16acafc64d running on localhost.localdomain Mon Oct 24 05:12:47 2022 SUT (System Under Test) info as seen by some common utilities. For more information on this section, see https://www.spec.org/cpu2017/Docs/config.html#sysinfo From /proc/cpuinfo model name : Intel(R) Xeon(R) Gold 5318Y CPU @ 2.10GHz 2 "physical id"s (chips) 96 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 24 siblings : 48 physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 From lscpu from util-linux 2.32.1: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 96 On-line CPU(s) list: 0-95 Thread(s) per core: 2 Core(s) per socket: 24 Socket(s): 2 NUMA node(s): 4 Vendor ID: GenuineIntel CPU family: 6 Model: 106 Model name: Intel(R) Xeon(R) Gold 5318Y CPU @ 2.10GHz Stepping: 6 CPU MHz: 2036.577 CPU max MHz: 3400.0000 CPU min MHz: 800.0000 BogoMIPS: 4200.00 Virtualization: VT-x L1d cache: 48K L1i cache: 32K L2 cache: 1280K L3 cache: 36864K NUMA node0 CPU(s): 0-11,48-59 NUMA node1 CPU(s): 12-23,60-71 NUMA node2 CPU(s): 24-35,72-83 NUMA node3 CPU(s): 36-47,84-95 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 invpcid_single ssbd mba ibrs ibpb stibp ibrs_enhanced tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a avx512f avx512dq rdseed adx smap avx512ifma clflushopt clwb intel_pt avx512cd sha_ni avx512bw avx512vl xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local wbnoinvd dtherm ida arat pln pts hwp hwp_act_window hwp_epp hwp_pkg_req avx512vbmi umip pku ospke avx512_vbmi2 gfni vaes vpclmulqdq avx512_vnni avx512_bitalg tme avx512_vpopcntdq la57 rdpid md_clear pconfig flush_l1d arch_capabilities /proc/cpuinfo cache data cache size : 36864 KB From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a physical chip. available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 48 49 50 51 52 53 54 55 56 57 58 59 node 0 size: 257462 MB node 0 free: 256789 MB node 1 cpus: 12 13 14 15 16 17 18 19 20 21 22 23 60 61 62 63 64 65 66 67 68 69 70 71 node 1 size: 258015 MB node 1 free: 257728 MB node 2 cpus: 24 25 26 27 28 29 30 31 32 33 34 35 72 73 74 75 76 77 78 79 80 81 82 83 node 2 size: 258042 MB node 2 free: 257820 MB node 3 cpus: 36 37 38 39 40 41 42 43 44 45 46 47 84 85 86 87 88 89 90 91 92 93 94 95 node 3 size: 258040 MB node 3 free: 257821 MB node distances: node 0 1 2 3 0: 10 11 20 20 1: 11 10 20 20 2: 20 20 10 11 3: 20 20 11 10 From /proc/meminfo MemTotal: 1056317484 kB HugePages_Total: 0 Hugepagesize: 2048 kB /sbin/tuned-adm active Current active profile: throughput-performance /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has performance From /etc/*release* /etc/*version* os-release: NAME="Red Hat Enterprise Linux" VERSION="8.2 (Ootpa)" ID="rhel" ID_LIKE="fedora" VERSION_ID="8.2" PLATFORM_ID="platform:el8" PRETTY_NAME="Red Hat Enterprise Linux 8.2 (Ootpa)" ANSI_COLOR="0;31" redhat-release: Red Hat Enterprise Linux release 8.2 (Ootpa) system-release: Red Hat Enterprise Linux release 8.2 (Ootpa) system-release-cpe: cpe:/o:redhat:enterprise_linux:8.2:ga uname -a: Linux localhost.localdomain 4.18.0-193.el8.x86_64 #1 SMP Fri Mar 27 14:35:58 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux Kernel self-reported vulnerability status: CVE-2018-12207 (iTLB Multihit): Not affected CVE-2018-3620 (L1 Terminal Fault): Not affected Microarchitectural Data Sampling: Not affected CVE-2017-5754 (Meltdown): Not affected CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled via prctl and seccomp CVE-2017-5753 (Spectre variant 1): Mitigation: usercopy/swapgs barriers and __user pointer sanitization CVE-2017-5715 (Spectre variant 2): Mitigation: Enhanced IBRS, IBPB: conditional, RSB filling CVE-2020-0543 (Special Register Buffer Data Sampling): No status reported CVE-2019-11135 (TSX Asynchronous Abort): Not affected run-level 3 Oct 24 05:12 SPEC is set to: /home/Benchmark/speccpu Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/rhel-home xfs 392G 21G 372G 6% /home From /sys/devices/virtual/dmi/id Vendor: FUJITSU Product: PRIMERGY RX2540 M6 Product Family: SERVER Serial: EWAAxxxxxx Additional information from dmidecode 3.2 follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 32x Samsung M393A4K40DB3-CWE 32 GB 2 rank 3200, configured at 2933 BIOS: BIOS Vendor: FUJITSU BIOS Version: V1.0.0.0 R1.16.0 for D3891-A1x BIOS Date: 07/19/2022 BIOS Revision: 1.16 Firmware Revision: 3.40 (End of data from sysinfo program)
============================================================================================================ C | 500.perlbench_r(base) 502.gcc_r(base) 505.mcf_r(base) 525.x264_r(base) 557.xz_r(base) ------------------------------------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------------------------------------ ============================================================================================================ C++ | 520.omnetpp_r(base) 523.xalancbmk_r(base) 531.deepsjeng_r(base) 541.leela_r(base) ------------------------------------------------------------------------------------------------------------ Intel(R) oneAPI DPC++/C++ Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------------------------------------ ============================================================================================================ Fortran | 548.exchange2_r(base) ------------------------------------------------------------------------------------------------------------ Intel(R) Fortran Compiler for applications running on Intel(R) 64, Version 2022.1.0 Build 20220316 Copyright (C) 1985-2022 Intel Corporation. All rights reserved. ------------------------------------------------------------------------------------------------------------
500.perlbench_r: | -DSPEC_LP64 -DSPEC_LINUX_X64 |
502.gcc_r: | -DSPEC_LP64 |
505.mcf_r: | -DSPEC_LP64 |
520.omnetpp_r: | -DSPEC_LP64 |
523.xalancbmk_r: | -DSPEC_LP64 -DSPEC_LINUX |
525.x264_r: | -DSPEC_LP64 |
531.deepsjeng_r: | -DSPEC_LP64 |
541.leela_r: | -DSPEC_LP64 |
548.exchange2_r: | -DSPEC_LP64 |
557.xz_r: | -DSPEC_LP64 |
-w -std=c11 -m64 -Wl,-z,muldefs -xCORE-AVX2 -O3 -ffast-math -flto -mfpmath=sse -funroll-loops -qopt-mem-layout-trans=4 -L/usr/local/intel/compiler/2022.1.0/linux/compiler/lib/intel64_lin -lqkmalloc |
-w -m64 -Wl,-z,muldefs -xCORE-AVX2 -O3 -ffast-math -flto -mfpmath=sse -funroll-loops -qopt-mem-layout-trans=4 -L/usr/local/intel/compiler/2022.1.0/linux/compiler/lib/intel64_lin -lqkmalloc |