SPEC CPU®2017 Floating Point Speed Result

Copyright 2017-2021 Standard Performance Evaluation Corporation

Hewlett Packard Enterprise (Test Sponsor: HPE)

ProLiant DL325 Gen10 Plus v2
(3.50 GHz, AMD EPYC 73F3)

SPECspeed®2017_fp_base = 11800

SPECspeed®2017_fp_peak = 12700
CPU2017 License: 3 Test Date: Apr-2021
Test Sponsor: HPE Hardware Availability: Jun-2021
Tested by: HPE Software Availability: Mar-2021

Benchmark result graphs are available in the PDF report.

Hardware
CPU Name: AMD EPYC 73F3
  Max MHz: 4000
  Nominal: 3500
Enabled: 16 cores, 1 chip, 2 threads/core
Orderable: 1 chip
Cache L1: 32 KB I + 32 KB D on chip per core
  L2: 512 KB I+D on chip per core
  L3: 256 MB I+D on chip per chip,
32 MB shared / 2 cores
  Other: None
Memory: 1 TB (8 x 128 GB 4Rx4 PC4-3200AA-L)
Storage: 1 x 800 GB SAS SSD, RAID 0
Other: None
Software
OS: Ubuntu 20.04.1 LTS (x86_64)
Kernel 5.4.0-54-generic
Compiler: C/C++/Fortran: Version 3.0.0 of AOCC
Parallel: Yes
Firmware: HPE BIOS Version A43 v2.40 02/15/2021 released
Mar-2021
File System: ext4
System State: Run level 5 (multi-user, GUI disabled)
Base Pointers: 64-bit
Peak Pointers: 64-bit
Other: jemalloc: jemalloc memory allocator library v5.1.0
Power Management: BIOS set to prefer performance at the cost of
additional power usage

Results Table

Benchmark Base Peak
Threads Seconds Ratio Seconds Ratio Seconds Ratio Threads Seconds Ratio Seconds Ratio Seconds Ratio
SPECspeed®2017_fp_base 11800
SPECspeed®2017_fp_peak 12700
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.
603.bwaves_s 16 1470 4010 1470 4000 1470 4000 16 1470 4010 1470 4000 1470 4000
607.cactuBSSN_s 16 1020 1630 1030 1620 1030 1620 16 1020 1630 1030 1620 1030 1630
619.lbm_s 16 92.0 57.0 91.9 57.0 91.7 57.1 32 73.5 71.3 73.5 71.2 73.2 71.6
621.wrf_s 16 89.5 1480 89.7 1470 89.5 1480 16 89.4 1480 89.5 1480 89.5 1480
627.cam4_s 16 1250 71.0 1250 70.8 1250 71.0 32 98.5 89.9 98.8 89.7 98.6 89.9
628.pop2_s 16 1440 82.6 1430 82.7 1440 82.3 16 1440 82.6 1430 82.7 1440 82.3
638.imagick_s 16 1370 1050 1370 1050 1370 1050 16 1370 1050 1370 1050 1370 1050
644.nab_s 16 1170 1490 1170 1490 1170 1490 32 91.5 1910 91.5 1910 91.6 1910
649.fotonik3d_s 16 1240 73.7 1230 73.9 1240 73.6 16 1240 73.7 1230 73.9 1240 73.6
654.roms_s 16 1160 1360 1160 1360 1160 1360 16 1070 1470 1070 1480 1070 1470

Compiler Notes

The AMD64 AOCC Compiler Suite is available at
http://developer.amd.com/amd-aocc/

Submit Notes

The config file option 'submit' was used.
'numactl' was used to bind copies to the cores.
See the configuration file for details.

Operating System Notes

'ulimit -s unlimited' was used to set environment stack size
'ulimit -l 2097152' was used to set environment locked pages in memory limit
runcpu command invoked through numactl i.e.:
numactl --interleave=all runcpu <etc>
'echo 8 > /proc/sys/vm/dirty_ratio' run as root to limit dirty cache to 8% of
memory.
'echo 1 > /proc/sys/vm/swappiness' run as root to limit swap usage to minimum
necessary.
'echo 1 > /proc/sys/vm/zone_reclaim_mode' run as root to free node-local memory
and avoid remote memory usage.
'sync; echo 3 > /proc/sys/vm/drop_caches' run as root to reset filesystem caches.
'sysctl -w kernel.randomize_va_space=0' run as root to disable address space layout
randomization (ASLR) to reduce run-to-run variability.
'echo always > /sys/kernel/mm/transparent_hugepage/enabled' and
'echo always > /sys/kernel/mm/transparent_hugepage/defrag' run as root to enable
Transparent Hugepages (THP) for this run.
'echo madvise > /sys/kernel/mm/transparent_hugepage/enabled' run as root for peak
runs of 628.pop2_s and 638.imagick_s to enable THP only on request.

The real test date is Apr-2021. The clock was mistakenly set to 2020 before the benchmark was run.

Environment Variables Notes

Environment variables set by runcpu before the start of the run:
GOMP_CPU_AFFINITY = "0-31"
LD_LIBRARY_PATH =
     "/cpu2017/amd_speed_aocc300_milan_B_lib/64;/cpu2017/amd_speed_aocc300_mi
     lan_B_lib/32:"
MALLOC_CONF = "retain:true"
OMP_DYNAMIC = "false"
OMP_SCHEDULE = "static"
OMP_STACKSIZE = "128M"
OMP_THREAD_LIMIT = "32"

Environment variables set by runcpu during the 607.cactuBSSN_s peak run:
GOMP_CPU_AFFINITY = "0-15"

Environment variables set by runcpu during the 619.lbm_s peak run:
GOMP_CPU_AFFINITY = "0 16 1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26
     11 27 12 28 13 29 14 30 15 31"

Environment variables set by runcpu during the 621.wrf_s peak run:
GOMP_CPU_AFFINITY = "0-15"

Environment variables set by runcpu during the 627.cam4_s peak run:
GOMP_CPU_AFFINITY = "0 16 1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26
     11 27 12 28 13 29 14 30 15 31"

Environment variables set by runcpu during the 644.nab_s peak run:
GOMP_CPU_AFFINITY = "0 16 1 17 2 18 3 19 4 20 5 21 6 22 7 23 8 24 9 25 10 26
     11 27 12 28 13 29 14 30 15 31"

Environment variables set by runcpu during the 654.roms_s peak run:
GOMP_CPU_AFFINITY = "0-15"

General Notes

Binaries were compiled on a system with 2x AMD EPYC 7742 CPU + 1TiB Memory using openSUSE 15.2

NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1)
is mitigated in the system as tested and documented.
Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2)
is mitigated in the system as tested and documented.

jemalloc: configured and built with GCC v4.8.2 in RHEL 7.4 (No options specified)
jemalloc 5.1.0 is available here:
https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2

Platform Notes

BIOS Configuration
 Workload Profile set to General Peak Frequency Compute
 Determinism Control set to Manual
  Performance Determinism set to Power Deterministic
 Last-Level Cache (LLC) as NUMA Node set to Enabled
 NUMA memory domains per socket set to One memory domain per socket
 Thermal Configuration set to Maximum Cooling
 Workload Profile set to Custom
  Infinity Fabric Power Management set to Disabled
   Infinity Fabric Performance State set to P0
  Power Regulator set to OS Control Mode

 Sysinfo program /cpu2017/bin/sysinfo
 Rev: r6538 of 2020-09-24 e8664e66d2d7080afeaa89d4b38e2f1c
 running on dl325gen10plus Wed Apr  1 17:24:56 2020

 SUT (System Under Test) info as seen by some common utilities.
 For more information on this section, see
    https://www.spec.org/cpu2017/Docs/config.html#sysinfo

 From /proc/cpuinfo
    model name : AMD EPYC 73F3 16-Core Processor
       1  "physical id"s (chips)
       32 "processors"
    cores, siblings (Caution: counting these is hw and system dependent. The following
    excerpts from /proc/cpuinfo might not be reliable.  Use with caution.)
       cpu cores : 16
       siblings  : 32
       physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

 From lscpu:
      Architecture:                    x86_64
      CPU op-mode(s):                  32-bit, 64-bit
      Byte Order:                      Little Endian
      Address sizes:                   48 bits physical, 48 bits virtual
      CPU(s):                          32
      On-line CPU(s) list:             0-31
      Thread(s) per core:              2
      Core(s) per socket:              16
      Socket(s):                       1
      NUMA node(s):                    8
      Vendor ID:                       AuthenticAMD
      CPU family:                      25
      Model:                           1
      Model name:                      AMD EPYC 73F3 16-Core Processor
      Stepping:                        1
      Frequency boost:                 enabled
      CPU MHz:                         1794.166
      CPU max MHz:                     3500.0000
      CPU min MHz:                     1500.0000
      BogoMIPS:                        6987.09
      Virtualization:                  AMD-V
      L1d cache:                       512 KiB
      L1i cache:                       512 KiB
      L2 cache:                        8 MiB
      L3 cache:                        256 MiB
      NUMA node0 CPU(s):               0,1,16,17
      NUMA node1 CPU(s):               2,3,18,19
      NUMA node2 CPU(s):               4,5,20,21
      NUMA node3 CPU(s):               6,7,22,23
      NUMA node4 CPU(s):               8,9,24,25
      NUMA node5 CPU(s):               10,11,26,27
      NUMA node6 CPU(s):               12,13,28,29
      NUMA node7 CPU(s):               14,15,30,31
      Vulnerability Itlb multihit:     Not affected
      Vulnerability L1tf:              Not affected
      Vulnerability Mds:               Not affected
      Vulnerability Meltdown:          Not affected
      Vulnerability Spec store bypass: Mitigation; Speculative Store Bypass disabled via
      prctl and seccomp
      Vulnerability Spectre v1:        Mitigation; usercopy/swapgs barriers and __user
      pointer sanitization
      Vulnerability Spectre v2:        Mitigation; Full AMD retpoline, IBPB conditional,
      IBRS_FW, STIBP always-on, RSB filling
      Vulnerability Srbds:             Not affected
      Vulnerability Tsx async abort:   Not affected
      Flags:                           fpu vme de pse tsc msr pae mce cx8 apic sep mtrr
      pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt
      pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid
      aperfmperf pni pclmulqdq monitor ssse3 fma cx16 pcid sse4_1 sse4_2 movbe popcnt aes
      xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a
      misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb
      bpext perfctr_llc mwaitx cpb cat_l3 cdp_l3 invpcid_single hw_pstate ssbd mba ibrs
      ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 invpcid cqm rdt_a rdseed adx smap
      clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc
      cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr wbnoinvd arat npt lbrv svm_lock
      nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold
      v_vmsave_vmload vgif umip pku ospke vaes vpclmulqdq rdpid overflow_recov succor smca

 /proc/cpuinfo cache data
    cache size : 512 KB

 From numactl --hardware  WARNING: a numactl 'node' might or might not correspond to a
 physical chip.
   available: 8 nodes (0-7)
   node 0 cpus: 0 1 16 17
   node 0 size: 128776 MB
   node 0 free: 128656 MB
   node 1 cpus: 2 3 18 19
   node 1 size: 129022 MB
   node 1 free: 128920 MB
   node 2 cpus: 4 5 20 21
   node 2 size: 129022 MB
   node 2 free: 128878 MB
   node 3 cpus: 6 7 22 23
   node 3 size: 129022 MB
   node 3 free: 128844 MB
   node 4 cpus: 8 9 24 25
   node 4 size: 128998 MB
   node 4 free: 128811 MB
   node 5 cpus: 10 11 26 27
   node 5 size: 129022 MB
   node 5 free: 128746 MB
   node 6 cpus: 12 13 28 29
   node 6 size: 129022 MB
   node 6 free: 128895 MB
   node 7 cpus: 14 15 30 31
   node 7 size: 116909 MB
   node 7 free: 116743 MB
   node distances:
   node   0   1   2   3   4   5   6   7
     0:  10  11  11  11  11  11  11  11
     1:  11  10  11  11  11  11  11  11
     2:  11  11  10  11  11  11  11  11
     3:  11  11  11  10  11  11  11  11
     4:  11  11  11  11  10  11  11  11
     5:  11  11  11  11  11  10  11  11
     6:  11  11  11  11  11  11  10  11
     7:  11  11  11  11  11  11  11  10

 From /proc/meminfo
    MemTotal:       1044274732 kB
    HugePages_Total:       0
    Hugepagesize:       2048 kB

 /sys/devices/system/cpu/cpu*/cpufreq/scaling_governor has
    performance

 /usr/bin/lsb_release -d
    Ubuntu 20.04.1 LTS

 From /etc/*release* /etc/*version*
    debian_version: bullseye/sid
    os-release:
       NAME="Ubuntu"
       VERSION="20.04.1 LTS (Focal Fossa)"
       ID=ubuntu
       ID_LIKE=debian
       PRETTY_NAME="Ubuntu 20.04.1 LTS"
       VERSION_ID="20.04"
       HOME_URL="https://www.ubuntu.com/"
       SUPPORT_URL="https://help.ubuntu.com/"

 uname -a:
    Linux dl325gen10plus 5.4.0-54-generic #60-Ubuntu SMP Fri Nov 6 10:37:59 UTC 2020
    x86_64 x86_64 x86_64 GNU/Linux

 Kernel self-reported vulnerability status:

 CVE-2018-12207 (iTLB Multihit):                        Not affected
 CVE-2018-3620 (L1 Terminal Fault):                     Not affected
 Microarchitectural Data Sampling:                      Not affected
 CVE-2017-5754 (Meltdown):                              Not affected
 CVE-2018-3639 (Speculative Store Bypass):              Mitigation: Speculative Store
                                                        Bypass disabled via prctl and
                                                        seccomp
 CVE-2017-5753 (Spectre variant 1):                     Mitigation: usercopy/swapgs
                                                        barriers and __user pointer
                                                        sanitization
 CVE-2017-5715 (Spectre variant 2):                     Mitigation: Full AMD retpoline,
                                                        IBPB: conditional, IBRS_FW, STIBP:
                                                        always-on, RSB filling
 CVE-2020-0543 (Special Register Buffer Data Sampling): Not affected
 CVE-2019-11135 (TSX Asynchronous Abort):               Not affected

 run-level 5 Apr 1 17:23

 SPEC is set to: /cpu2017
    Filesystem     Type  Size  Used Avail Use% Mounted on
    /dev/sdb2      ext4  733G   23G  673G   4% /

 From /sys/devices/virtual/dmi/id
     Vendor:         HPE
     Product:        ProLiant DL325 Gen10 Plus
     Product Family: ProLiant
     Serial:         CN79290FKQ

 Additional information from dmidecode follows.  WARNING: Use caution when you interpret
 this section. The 'dmidecode' program reads system data which is "intended to allow
 hardware to be accurately determined", but the intent may not be met, as there are
 frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard.
   Memory:
     8x UNKNOWN M386AAG40AM3-CWE 128 GB 4 rank 3200
     8x UNKNOWN NOT AVAILABLE

 BIOS:
    BIOS Vendor:       HPE
    BIOS Version:      A43
    BIOS Date:         02/15/2021
    BIOS Revision:     2.40
    Firmware Revision: 2.40

 (End of data from sysinfo program)

Compiler Version Notes

==============================================================================
C               | 619.lbm_s(base, peak) 638.imagick_s(base, peak)
                | 644.nab_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
C++, C, Fortran | 607.cactuBSSN_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran         | 603.bwaves_s(base, peak) 649.fotonik3d_s(base, peak)
                | 654.roms_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

==============================================================================
Fortran, C      | 621.wrf_s(base, peak) 627.cam4_s(base, peak)
                | 628.pop2_s(base, peak)
------------------------------------------------------------------------------
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
AMD clang version 12.0.0 (CLANG: AOCC_3.0.0-Build#78 2020_12_10) (based on
  LLVM Mirror.Version.12.0.0)
Target: x86_64-unknown-linux-gnu
Thread model: posix
InstalledDir: /opt/AMD/aocc-compiler-3.0.0/bin
------------------------------------------------------------------------------

Base Compiler Invocation

C benchmarks:

 clang 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Base Portability Flags

603.bwaves_s:  -DSPEC_LP64 
607.cactuBSSN_s:  -DSPEC_LP64 
619.lbm_s:  -DSPEC_LP64 
621.wrf_s:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
627.cam4_s:  -DSPEC_CASE_FLAG   -DSPEC_LP64 
628.pop2_s:  -DSPEC_CASE_FLAG   -Mbyteswapio   -DSPEC_LP64 
638.imagick_s:  -DSPEC_LP64 
644.nab_s:  -DSPEC_LP64 
649.fotonik3d_s:  -DSPEC_LP64 
654.roms_s:  -DSPEC_LP64 

Base Optimization Flags

C benchmarks:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Fortran benchmarks:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Hz,1,0x1   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp=true   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Benchmarks using both Fortran and C:

 -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Hz,1,0x1   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Benchmarks using Fortran, C, and C++:

 -m64   -mno-adx   -mno-sse4a   -std=c++98   -Wl,-mllvm -Wl,-x86-use-vzeroupper=false   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -O3   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -mllvm -inline-threshold=1000   -fremap-arrays   -mllvm -function-specialize   -flv-function-specialization   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -mllvm -enable-partial-unswitch   -mllvm -unroll-threshold=100   -finline-aggressive   -mllvm -loop-unswitch-threshold=200000   -mllvm -reroll-loops   -mllvm -aggressive-loop-unswitch   -mllvm -extra-vectorizer-passes   -mllvm -convert-pow-exp-to-int=false   -Hz,1,0x1   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -lsr-in-nested-loop   -z muldefs   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang   -lflangrti 

Base Other Flags

C benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Fortran benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using both Fortran and C:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using Fortran, C, and C++:

 -Wno-unused-command-line-argument   -Wno-return-type 

Peak Compiler Invocation

C benchmarks:

 clang 

Fortran benchmarks:

 flang 

Benchmarks using both Fortran and C:

 flang   clang 

Benchmarks using Fortran, C, and C++:

 clang++   clang   flang 

Peak Portability Flags

Same as Base Portability Flags

Peak Optimization Flags

C benchmarks:

619.lbm_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
638.imagick_s:  basepeak = yes 
644.nab_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-region-vectorize   -Wl,-mllvm -Wl,-function-specialize   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Fortran benchmarks:

603.bwaves_s:  basepeak = yes 
649.fotonik3d_s:  basepeak = yes 
654.roms_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -Mrecursive   -mllvm -reduce-array-computations=3   -mllvm -global-vectorize-slp=true   -mllvm -enable-licm-vrp   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Benchmarks using both Fortran and C:

621.wrf_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Hz,1,0x1   -O3   -Mrecursive   -mllvm -fuse-tile-inner-loop   -funroll-loops   -mllvm -extra-vectorizer-passes   -mllvm -lsr-in-nested-loop   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
627.cam4_s:  -m64   -mno-adx   -mno-sse4a   -Wl,-mllvm -Wl,-enable-X86-prefetching   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -Mrecursive   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 
628.pop2_s:  basepeak = yes 

Benchmarks using Fortran, C, and C++:

 -m64   -mno-adx   -mno-sse4a   -std=c++98   -Wl,-mllvm -Wl,-x86-use-vzeroupper=false   -Wl,-mllvm -Wl,-enable-licm-vrp   -Wl,-mllvm -Wl,-function-specialize   -Wl,-mllvm -Wl,-align-all-nofallthru-blocks=6   -Wl,-mllvm -Wl,-reduce-array-computations=3   -Ofast   -march=znver3   -fveclib=AMDLIBM   -ffast-math   -flto   -fstruct-layout=5   -mllvm -unroll-threshold=50   -fremap-arrays   -flv-function-specialization   -mllvm -inline-threshold=1000   -mllvm -enable-gvn-hoist   -mllvm -global-vectorize-slp=true   -mllvm -function-specialize   -mllvm -enable-licm-vrp   -mllvm -reduce-array-computations=3   -finline-aggressive   -mllvm -unroll-threshold=100   -mllvm -reroll-loops   -mllvm -aggressive-loop-unswitch   -Mrecursive   -DSPEC_OPENMP   -fopenmp   -fopenmp=libomp   -lomp   -lamdlibm   -ljemalloc   -lflang 

Peak Other Flags

C benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Fortran benchmarks:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using both Fortran and C:

 -Wno-unused-command-line-argument   -Wno-return-type 

Benchmarks using Fortran, C, and C++:

 -Wno-unused-command-line-argument   -Wno-return-type 

The flags files that were used to format this result can be browsed at
http://www.spec.org/cpu2017/flags/aocc300-flags-A1.html,
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revP.html.

You can also download the XML flags sources by saving the following links:
http://www.spec.org/cpu2017/flags/aocc300-flags-A1.xml,
http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revP.xml.

SPEC CPU and SPECspeed are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders.

For questions about this result, please contact the tester. For other inquiries, please contact [email protected]
Copyright 2017-2021 Standard Performance Evaluation Corporation
Tested with SPEC CPU®2017 v1.1.5 on 2020-04-01 13:24:55-0400.
Report generated on 2021-05-12 13:41:59 by SPEC CPU®2017 HTML formatter v6442.
Originally published on 2021-05-11.