# Invocation command line: # /mnt/ramdisk/cpu2017-1.1.0/bin/harness/runcpu --configfile amd_rate_aocc200_rome_C4.cfg --tune all --reportable --iterations 2 --nopower --runmode rate --tune base:peak --size test:train:refrate fprate # output_root was not used for this run ############################################################################ ################################################################################ # AMD AOCC 2.0.0 SPEC CPU2017 V1.1.0 Rate Configuration File for 64-bit Linux # # File name : amd_rate_aocc200_rome_C4.cfg # Creation Date : February 18, 2020 # CPU2017 Version : 1.1.0 # Supported benchmarks : All Rate benchmarks (intrate, fprate) # Compiler name/version : AOCC v2.0.0 # Operating system version : Fedora 26 # Supported OS's : Ubuntu 18.04/19.04/19.10+, RHEL 8.0, SLES 15 SP1 # Hardware : AMD Rome, Naples (AMD64) # FP Base Pointer Size : 64-bit # FP Peak Pointer Size : 64-bit # INT Base Pointer Size : 64-bit # INT Peak Pointer Size : 32/64-bit # Auto Parallization : No # # Note: DO NOT EDIT THIS FILE, the only edits required to properly run these # binaries are made in the ini Python file. Please consult Readme.amd_rate_aocc200_rome_C4.txt # for a few uncommon exceptions which require edits to this file. # # Description: # # This binary package automates away many of the complexities necessary to set # up and run SPEC CPU2017 under optimized conditions on AMD Rome/Naples-based # server platforms within Linux (AMD64). # # The binary package was built specifically for AMD Rome/Naples microprocessors and # is not intended to run on other products. # # Please install the binary package by following the instructions in # "Readme.amd_rate_aocc200_rome_C4.txt" under the "How To Use the Binaries" section. # # The binary package is designed to work without alteration on two socket AMD # Rome/Naples-based servers with 64 cores per socket, SMT enabled and 1 TiB of DDR4 # memory distributed evenly among all 16 channels using 32 GiB DIMMs. # # To run the binary package on other Rome/Naples configurations, please review # "Readme.amd_rate_aocc200_rome_C4.txt". In general, Rome or Naples CPUs # should be autodetected with no action required by the user. # # In most cases, it should be unnecessary to edit "amd_rate_aocc200_rome_C4.cfg" or any # other file besides "ini_amd_rate_aocc200_rome_C4.py" where reporting fields # and run conditions are set. # # The run script automatically sets the optimal number of rate copies and binds # them appropriately. # # The run script and accompanying binary package are designed to work on Ubuntu # 18.04+, RHEL 8.0 and SLES 15 SP1. # # Important! If you write your own run script, please set the stack size to # "unlimited" when executing this binary package. Failure to do so may cause # some benchmarks to overflow the stack. For example, to set stack size within # the bash shell, include the following line somewhere at the top of your run # script before the runcpu invocation: # # ulimit -s unlimited # # Modification of this config file should only be necessary if you intend to # rebuild the binaries. General instructions for rebuilding the binaries are # found in-line below. # ################################################################################ # Include file name ################################################################################ # The include file contains fields that are commonly changed. This file is auto- # generated based upon INI file settings and should not need user modification # for runs. %define inc_file_name amd_rate_aocc200_rome_C4.inc ################################################################################ # Binary label extension and "allow_build"" switch ################################################################################ # Only modify the binary label extension if you plan to rebuild the binaries. %define ext amd_rate_aocc200_rome_C # If you plan to recompile these CPU2017 binaries, please choose a new extension # name (ext above) to avoid confusion with the current binary set on your system # under test, and to avoid confusion for SPEC submission reviewers. You will # also need to set "allow_build" to true below. Finally, you must modify the # Paths section below to point to your library locations if the paths are not # already set up in your build environment. # Change the following line to true if you intend to REBUILD the binaries (AMD # does not support this). Valid values are "true" or "false" (no quotes). %define allow_build false ################################################################################ # Paths and Environment Variables # ** MODIFY AS NEEDED (modification should not be necessary for runs) ** ################################################################################ # Allow environment variables to be set before runs: preenv = 1 # Necessary to avoid out-of-memory exceptions on certain SUTs: preENV_MALLOC_CONF = retain:true # Define the name of the directory that holds AMD library files: %define lib_dir amd_rate_aocc200_rome_C_lib # Set the shared object library path for runs and builds: preENV_LD_LIBRARY_PATH = $[top]/%{lib_dir}/64;$[top]/%{lib_dir}/32:%{ENV_LD_LIBRARY_PATH} # Define 32-bit library build paths: # Do not use $[top] with the 32-bit libraries because doing so will cause an # options checksum error triggering a xalanc recompile attempt on SUTs having # different file paths: JEMALLOC_LIB32_PATH = /sppo/dev/cpu2017/v110/amd_rate_aocc200_rome_C_lib/32 %if '%{allow_build}' eq 'false' # The include file is only needed for runs, but not for builds. # include: %{inc_file_name} # ----- Begin inclusion of 'amd_rate_aocc200_rome_C4.inc' ############################################################################ ################################################################################ ################################################################################ # File name: amd_rate_aocc200_rome_C4.inc # File generation code date: February 18, 2020 # File generation date/time: April 26, 2020 / 12:34:51 # # This file is automatically generated during a SPEC CPU2017 run. # # To modify inc file generation, please consult the readme file or the run # script. ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The following macros are generated for use in the cfg file. ################################################################################ ################################################################################ %define logical_core_count 64 %define physical_core_count 32 ################################################################################ # The following inc blocks set the rate copy counts and affinity settings. # # intrate benchmarks: 500.perlbench_r,502.gcc_r,505.mcf_r,520.omnetpp_r, # 523.xalancbmk_r,525.x264_r,531.deepsjeng_r,541.leela_r,548.exchange2_r, # 557.xz_r # fpspeed benchmarks: 503.bwaves_r,507.cactuBSSN_r,519.lbm_r,521.wrf_r, # 527.cam4_r,538.imagick_r,544.nab_r,549.fotonik3d_r,554.roms_r # ################################################################################ # default copy counts: default: copies = 64 # Bind commands for assigning affinity: bind0 = numactl --localalloc --physcpubind=0 bind1 = numactl --localalloc --physcpubind=1 bind2 = numactl --localalloc --physcpubind=2 bind3 = numactl --localalloc --physcpubind=3 bind4 = numactl --localalloc --physcpubind=4 bind5 = numactl --localalloc --physcpubind=5 bind6 = numactl --localalloc --physcpubind=6 bind7 = numactl --localalloc --physcpubind=7 bind8 = numactl --localalloc --physcpubind=8 bind9 = numactl --localalloc --physcpubind=9 bind10 = numactl --localalloc --physcpubind=10 bind11 = numactl --localalloc --physcpubind=11 bind12 = numactl --localalloc --physcpubind=12 bind13 = numactl --localalloc --physcpubind=13 bind14 = numactl --localalloc --physcpubind=14 bind15 = numactl --localalloc --physcpubind=15 bind16 = numactl --localalloc --physcpubind=16 bind17 = numactl --localalloc --physcpubind=17 bind18 = numactl --localalloc --physcpubind=18 bind19 = numactl --localalloc --physcpubind=19 bind20 = numactl --localalloc --physcpubind=20 bind21 = numactl --localalloc --physcpubind=21 bind22 = numactl --localalloc --physcpubind=22 bind23 = numactl --localalloc --physcpubind=23 bind24 = numactl --localalloc --physcpubind=24 bind25 = numactl --localalloc --physcpubind=25 bind26 = numactl --localalloc --physcpubind=26 bind27 = numactl --localalloc --physcpubind=27 bind28 = numactl --localalloc --physcpubind=28 bind29 = numactl --localalloc --physcpubind=29 bind30 = numactl --localalloc --physcpubind=30 bind31 = numactl --localalloc --physcpubind=31 bind32 = numactl --localalloc --physcpubind=32 bind33 = numactl --localalloc --physcpubind=33 bind34 = numactl --localalloc --physcpubind=34 bind35 = numactl --localalloc --physcpubind=35 bind36 = numactl --localalloc --physcpubind=36 bind37 = numactl --localalloc --physcpubind=37 bind38 = numactl --localalloc --physcpubind=38 bind39 = numactl --localalloc --physcpubind=39 bind40 = numactl --localalloc --physcpubind=40 bind41 = numactl --localalloc --physcpubind=41 bind42 = numactl --localalloc --physcpubind=42 bind43 = numactl --localalloc --physcpubind=43 bind44 = numactl --localalloc --physcpubind=44 bind45 = numactl --localalloc --physcpubind=45 bind46 = numactl --localalloc --physcpubind=46 bind47 = numactl --localalloc --physcpubind=47 bind48 = numactl --localalloc --physcpubind=48 bind49 = numactl --localalloc --physcpubind=49 bind50 = numactl --localalloc --physcpubind=50 bind51 = numactl --localalloc --physcpubind=51 bind52 = numactl --localalloc --physcpubind=52 bind53 = numactl --localalloc --physcpubind=53 bind54 = numactl --localalloc --physcpubind=54 bind55 = numactl --localalloc --physcpubind=55 bind56 = numactl --localalloc --physcpubind=56 bind57 = numactl --localalloc --physcpubind=57 bind58 = numactl --localalloc --physcpubind=58 bind59 = numactl --localalloc --physcpubind=59 bind60 = numactl --localalloc --physcpubind=60 bind61 = numactl --localalloc --physcpubind=61 bind62 = numactl --localalloc --physcpubind=62 bind63 = numactl --localalloc --physcpubind=63 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak copy counts: 32 510.parest_r,521.wrf_r,549.fotonik3d_r,554.roms_r=peak: copies = 32 # Bind commands for assigning affinity: bind0 = numactl --localalloc --physcpubind=0 bind1 = numactl --localalloc --physcpubind=1 bind2 = numactl --localalloc --physcpubind=2 bind3 = numactl --localalloc --physcpubind=3 bind4 = numactl --localalloc --physcpubind=4 bind5 = numactl --localalloc --physcpubind=5 bind6 = numactl --localalloc --physcpubind=6 bind7 = numactl --localalloc --physcpubind=7 bind8 = numactl --localalloc --physcpubind=8 bind9 = numactl --localalloc --physcpubind=9 bind10 = numactl --localalloc --physcpubind=10 bind11 = numactl --localalloc --physcpubind=11 bind12 = numactl --localalloc --physcpubind=12 bind13 = numactl --localalloc --physcpubind=13 bind14 = numactl --localalloc --physcpubind=14 bind15 = numactl --localalloc --physcpubind=15 bind16 = numactl --localalloc --physcpubind=16 bind17 = numactl --localalloc --physcpubind=17 bind18 = numactl --localalloc --physcpubind=18 bind19 = numactl --localalloc --physcpubind=19 bind20 = numactl --localalloc --physcpubind=20 bind21 = numactl --localalloc --physcpubind=21 bind22 = numactl --localalloc --physcpubind=22 bind23 = numactl --localalloc --physcpubind=23 bind24 = numactl --localalloc --physcpubind=24 bind25 = numactl --localalloc --physcpubind=25 bind26 = numactl --localalloc --physcpubind=26 bind27 = numactl --localalloc --physcpubind=27 bind28 = numactl --localalloc --physcpubind=28 bind29 = numactl --localalloc --physcpubind=29 bind30 = numactl --localalloc --physcpubind=30 bind31 = numactl --localalloc --physcpubind=31 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ ################################################################################ # peak copy counts: 16 503.bwaves_r=peak: copies = 16 # Bind commands for assigning affinity: bind0 = numactl --localalloc --physcpubind=0 bind1 = numactl --localalloc --physcpubind=2 bind2 = numactl --localalloc --physcpubind=4 bind3 = numactl --localalloc --physcpubind=6 bind4 = numactl --localalloc --physcpubind=8 bind5 = numactl --localalloc --physcpubind=10 bind6 = numactl --localalloc --physcpubind=12 bind7 = numactl --localalloc --physcpubind=14 bind8 = numactl --localalloc --physcpubind=16 bind9 = numactl --localalloc --physcpubind=18 bind10 = numactl --localalloc --physcpubind=20 bind11 = numactl --localalloc --physcpubind=22 bind12 = numactl --localalloc --physcpubind=24 bind13 = numactl --localalloc --physcpubind=26 bind14 = numactl --localalloc --physcpubind=28 bind15 = numactl --localalloc --physcpubind=30 submit = echo "$command" > run.sh ; $BIND bash run.sh ################################################################################ # Switch back to the default block after the include file: default: ################################################################################ ################################################################################ ################################################################################ ################################################################################ # The remainder of this file defines CPU2017 report parameters. ################################################################################ ################################################################################ ################################################################################ # SPEC CPU 2017 report header ################################################################################ license_num =55 # (Your SPEC license number) tester =Dell Inc. test_sponsor =Dell Inc. hw_vendor =Dell Inc. hw_model000 =PowerEdge R7525 (AMD EPYC 7F52, 3.50 GHz) #--------- If you install new compilers, edit this section -------------------- sw_compiler =C/C++/Fortran: Version 2.0.0 of AOCC ################################################################################ ################################################################################ # Hardware, firmware and software information ################################################################################ hw_avail =Jul-2020 sw_avail =Aug-2019 hw_cpu_name =AMD EPYC rome16 hw_cpu_nominal_mhz =3500 hw_cpu_max_mhz =3900 hw_ncores =32 hw_nthreadspercore =2 hw_ncpuorder =1,2 chips hw_other =None # Other perf-relevant hw, or "None" fw_bios =Version 1.4.6 released Apr-2020 sw_base_ptrsize =64-bit hw_pcache =32 KB I + 32 KB D on chip per core hw_scache =512 KB I+D on chip per core hw_tcache000 =256 MB I+D on chip per chip, 16 MB per core hw_ocache =None ################################################################################ # Notes ################################################################################ # Enter notes_000 through notes_100 here. notes_000 =Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26 notes_005 = notes_010 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_015 =is mitigated in the system as tested and documented. notes_020 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_025 =is mitigated in the system as tested and documented. notes_030 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_035 =is mitigated in the system as tested and documented. notes_040 =Benchmark run from a 225 GB ramdisk created with the cmd; "mount -t tmpfs -o size=225G tmpfs /mnt/ramdisk". notes_submit_000 ='numactl' was used to bind copies to the cores. notes_submit_005 =See the configuration file for details. notes_os_000 ='ulimit -s unlimited' was used to set environment stack size notes_os_005 ='ulimit -l 2097152' was used to set environment locked pages in memory limit notes_os_010 = notes_os_015 =runcpu command invoked through numactl i.e.: notes_os_020 =numactl --interleave=all runcpu notes_os_025 = notes_os_030 =Set dirty_ratio=8 to limit dirty cache to 8% of memory notes_os_035 =Set swappiness=1 to swap only if necessary notes_os_040 =Set zone_reclaim_mode=1 to free local node memory and avoid remote memory notes_os_045 =sync then drop_caches=3 to reset caches before invoking runcpu notes_os_050 = notes_os_055 =dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were notes_os_060 =all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). notes_os_065 = notes_os_070 =Transparent huge pages set to 'always' for this run (OS default) notes_comp_000 =The AMD64 AOCC Compiler Suite is available at notes_comp_005 =http://developer.amd.com/amd-aocc/ notes_comp_010 = notes_jemalloc_000 =jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto notes_jemalloc_005 =jemalloc 5.2.0 is available here: notes_jemalloc_010 =https://github.com/jemalloc/jemalloc/releases/download/5.2.0/jemalloc-5.2.0.tar.bz2 notes_jemalloc_015 = sw_other =jemalloc: jemalloc memory allocator library v5.2.0 power_management = BIOS set to prefer performance at the cost of additional power usage. ################################################################################ # The following note fields describe platorm settings. ################################################################################ # example: (uncomment as necessary) notes_plat_000 = BIOS settings: notes_plat_005 = NUMA Nodes Per Socket set to 4 notes_plat_010 = CCX as NUMA Domain set to Enabled notes_plat_015 = System Profile set to Custom notes_plat_020 = CPU Power Management set to Maximum Performance notes_plat_025 = Memory Frequency set to Maximum Performance notes_plat_030 = Turbo Boost Enabled notes_plat_035 = Cstates set to Enabled notes_plat_040 = Memory Patrol Scrub Disabled notes_plat_045 = Memory Refresh Rate set to 1x notes_plat_050 = PCI ASPM L1 Link Power Management Disabled notes_plat_055 = Determinism Slider set to Power Determinism notes_plat_060 = Efficiency Optimized Mode Disabled notes_plat_065 = Memory Interleaving set to Disabled notes_plat_070 = ApbDis set to Disabled notes_plat_075 = DLWM set to Unforced ################################################################################ # The following are custom fields: ################################################################################ # Use custom_fields to enter lines that are not listed here. For example: # notes_plat_100 = Energy Bias set to Max Performance # new_field = Ambient temperature set to 10C ################################################################################ # The following fields must be set here for only Int benchmarks. ################################################################################ intrate: sw_peak_ptrsize =32/64-bit ################################################################################ # The following fields must be set here for FP benchmarks. ################################################################################ fprate: sw_peak_ptrsize =64-bit ################################################################################ # The following fields must be set here or they will be overwritten by sysinfo. ################################################################################ intrate,fprate: hw_disk =1 x 960 GB SATA SSD hw_memory000 =512 GB (16 x 32 GB 2Rx4 PC4-3200AA-R, hw_memory001 =running at 3200) hw_memory002 = hw_nchips =2 prepared_by =Dell Inc. sw_file =tmpfs sw_os000 =SUSE Linux Enterprise Server 15 SP1 sw_os001 =kernel 4.12.14-195-default sw_state =Run level 3 (multi-user) ################################################################################ # End of inc file ################################################################################ # Switch back to the default block after the include file: default: # ---- End inclusion of '/mnt/ramdisk/cpu2017-1.1.0/config/amd_rate_aocc200_rome_C4.inc' # Switch back to default block after the include file: default: fail_build = 1 %elif '%{allow_build}' eq 'true' # If you intend to rebuild, be sure to set the library paths either in the # build script or here: preENV_LIBRARY_PATH = $[top]/%{lib_dir}/64;$[top]/%{lib_dir}/32:%{ENV_LIBRARY_PATH} % define build_ncpus 64 # controls number of simultaneous compiles fail_build = 0 makeflags = --jobs=%{build_ncpus} --load-average=%{build_ncpus} %else % error The value of "allow_build" is %{allow_build}, but it can only be "true" or "false". This error was generated %endif ################################################################################ # Enable automated data collection per benchmark ################################################################################ # Data collection is not enabled for reportable runs. # teeout is necessary to get data collection stdout into the logs. Best # practices for the individual data collection items would be to have # them store important output in separate files. Filenames could be # constructed from $SPEC (environment), $lognum (result number from runcpu), # and benchmark name/number. teeout = yes # Run runcpu with '-v 35' (or greater) to log lists of variables which can # be used in substitutions as below. # For CPU2006, change $label to $ext %define data-collection-parameters benchname='$name' benchnum='$num' benchmark='$benchmark' iteration=$iter size='$size' tune='$tune' label='$label' log='$log' lognum='$lognum' from_runcpu='$from_runcpu' %define data-collection-start $[top]/data-collection/data-collection start %{data-collection-parameters} %define data-collection-stop $[top]/data-collection/data-collection stop %{data-collection-parameters} monitor_specrun_wrapper = %{data-collection-start} ; $command ; %{data-collection-stop} ################################################################################ # Header settings ################################################################################ backup_config = 0 # set to 0 if you do not want backup files bench_post_setup = sync # command_add_redirect: If set, the generated ${command} will include # redirection operators (stdout, stderr), which are passed along to the shell # that executes the command. If this variable is not set, specinvoke does the # redirection. command_add_redirect = yes env_vars = no flagsurl000 = http://www.spec.org/cpu2017/flags/aocc200-flags-C4.xml flagsurl001 = http://www.spec.org/cpu2017/flags/Dell-Platform-Flags-PowerEdge-revE9.xml #flagsurl02 = $[top]/INVALID_platform_amd_rate_aocc200_rome.xml # label: User defined extension string that tags your binaries & directories: label = %{ext} line_width = 1020 log_line_width = 1020 mean_anyway = yes output_format = all reportable = yes size = test,train,ref teeout = yes teerunout = yes tune = base,peak ################################################################################ # Compilers ################################################################################ default: CC = clang CXX = clang++ FC = flang CLD = clang FLD = flang CC_VERSION_OPTION = --version CXX_VERSION_OPTION = --version FC_VERSION_OPTION = --version ################################################################################ # Portability Flags ################################################################################ default:# data model applies to all benchmarks EXTRA_PORTABILITY = -DSPEC_LP64 # *** Benchmark-specific portability *** # Anything other than the data model is only allowed where a need is proven. # (ordered by last 2 digits of benchmark number) 500.perlbench_r,600.perlbench_s: #lang='C' PORTABILITY = -DSPEC_LINUX_X64 521.wrf_r,621.wrf_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio 523.xalancbmk_r,623.xalancbmk_s: #lang='CXX' PORTABILITY = -DSPEC_LINUX 526.blender_r: #lang='CXX,C' CPORTABILITY = -funsigned-char CXXPORTABILITY = -D__BOOL_DEFINED 527.cam4_r,627.cam4_s: #lang='F,C' PORTABILITY = -DSPEC_CASE_FLAG 628.pop2_s: #lang='F,C' CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY = -Mbyteswapio ################################################################################ # Tuning Flags ################################################################################ ##################### # Base tuning flags # ##################### default=base: #optimize flags COPTIMIZE = -O3 -flto -ffast-math -march=znver2 -fstruct-layout=3 \ -mllvm -unroll-threshold=50 -fremap-arrays \ -mllvm -function-specialize -mllvm -enable-gvn-hoist \ -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp \ -mllvm -vector-library=LIBMVEC \ -mllvm -inline-threshold=1000 -flv-function-specialization CXXOPTIMIZE = -O3 -flto -ffast-math -march=znver2 \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -vector-library=LIBMVEC \ -mllvm -unroll-threshold=100 -flv-function-specialization \ -mllvm -enable-partial-unswitch FOPTIMIZE = -O3 -flto -march=znver2 -funroll-loops -Mrecursive \ -mllvm -vector-library=LIBMVEC EXTRA_FFLAGS = -Kieee -fno-finite-math-only #linker flags LDFLAGS = -flto -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-vector-library=LIBMVEC \ -Wl,-mllvm -Wl,-reduce-array-computations=3 LDCXXFLAGS = -Wl,-mllvm -Wl,-suppress-fmas #other libraries EXTRA_LIBS = -lmvec -lamdlibm -ljemalloc -lflang EXTRA_FLIBS = -lmvec -lamdlibm -lm # The following is necessary for 502/602 gcc: LDOPTIMIZE = -z muldefs MATHLIBOPT = -lmvec -lamdlibm -lm ######################## # intrate tuning flags # ######################## intrate: EXTRA_FFLAGS = -ffast-math \ -mllvm -disable-indvar-simplify \ -mllvm -unroll-aggressive \ -mllvm -unroll-threshold=150 LDFFLAGS = -ffast-math \ -Wl,-mllvm -Wl,-inline-recursion=4 \ -Wl,-mllvm -Wl,-lsr-in-nested-loop \ -Wl,-mllvm -Wl,-enable-iv-split ######################## # fprate tuning flags # ######################## fprate: CXX = clang++ -std=c++98 ##################### # Peak tuning flags # ##################### default=peak: #optimize flags COPTIMIZE = -Ofast -flto -march=znver2 -mno-sse4a -fstruct-layout=5 \ -mllvm -vectorize-memory-aggressively \ -mllvm -function-specialize -mllvm -enable-gvn-hoist \ -mllvm -unroll-threshold=50 -fremap-arrays \ -mllvm -vector-library=LIBMVEC \ -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp \ -mllvm -inline-threshold=1000 -flv-function-specialization CXXOPTIMIZE = -Ofast -flto -march=znver2 -flv-function-specialization \ -mllvm -unroll-threshold=100 -mllvm -enable-partial-unswitch \ -mllvm -loop-unswitch-threshold=200000 \ -mllvm -vector-library=LIBMVEC \ -mllvm -inline-threshold=1000 FOPTIMIZE = -O3 -flto -march=znver2 -funroll-loops -Mrecursive \ -mllvm -vector-library=LIBMVEC EXTRA_FFLAGS = -Kieee -fno-finite-math-only #linker flags LDFLAGS = -flto -Wl,-mllvm -Wl,-function-specialize \ -Wl,-mllvm -Wl,-region-vectorize \ -Wl,-mllvm -Wl,-vector-library=LIBMVEC \ -Wl,-mllvm -Wl,-reduce-array-computations=3 #libraries EXTRA_LIBS = -lmvec -lamdlibm -ljemalloc -lflang EXTRA_FLIBS = -lmvec -lamdlibm -lm MATHLIBOPT = -lmvec -lamdlibm -lm feedback = 0 PASS1_CFLAGS = -fprofile-instr-generate PASS2_CFLAGS = -fprofile-instr-use PASS1_FFLAGS = -fprofile-generate PASS2_FFLAGS = -fprofile-use PASS1_CXXFLAGS = -fprofile-instr-generate PASS2_CXXFLAGS = -fprofile-instr-use PASS1_LDFLAGS = -fprofile-instr-generate PASS2_LDFLAGS = -fprofile-instr-use fdo_run1 = $command ; llvm-profdata merge -output=default.profdata *.profraw 500.perlbench_r=peak: #lang='C' feedback = 1 502.gcc_r=peak: #lang='C' EXTRA_PORTABILITY = -D_FILE_OFFSET_BITS=64 EXTRA_COPTIMIZE = -fgnu89-inline CC = clang -m32 CLD = clang -m32 EXTRA_LIBS = -L$[JEMALLOC_LIB32_PATH] -ljemalloc MATHLIBOPT = -lm 510.parest_r=peak: LDCXXFLAGS = -Wl,-mllvm -Wl,-suppress-fmas 511.povray_r=peak: LDCXXFLAGS = -Wl,-mllvm -Wl,-x86-use-vzeroupper=false 523.xalancbmk_r=peak: #lang='CXX` EXTRA_PORTABILITY = -D_FILE_OFFSET_BITS=64 CXX = clang++ -m32 CXXLD = clang++ -m32 EXTRA_LIBS = -L$[JEMALLOC_LIB32_PATH] -ljemalloc MATHLIBOPT = -lm 525.x264_r=peak: #lang='C' feedback = 1 554.roms_r=peak: LDFFLAGS = -Wl,-mllvm -Wl,-enable-X86-prefetching # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:1b187da62efa5d65f0e989c214b6a257d16a31d3cf135973c9043da741052207) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /mnt/ramdisk/cpu2017-1.1.0/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011 notes_plat_sysinfo_015 = running on linux-g3ob Sun Apr 26 16:28:16 2020 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : AMD EPYC 7F52 16-Core Processor notes_plat_sysinfo_055 = 2 "physical id"s (chips) notes_plat_sysinfo_060 = 64 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 32 notes_plat_sysinfo_085 = physical 0: cores 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 notes_plat_sysinfo_090 = physical 1: cores 0 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 notes_plat_sysinfo_095 = notes_plat_sysinfo_100 = From lscpu: notes_plat_sysinfo_105 = Architecture: x86_64 notes_plat_sysinfo_110 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_115 = Byte Order: Little Endian notes_plat_sysinfo_120 = Address sizes: 43 bits physical, 48 bits virtual notes_plat_sysinfo_125 = CPU(s): 64 notes_plat_sysinfo_130 = On-line CPU(s) list: 0-63 notes_plat_sysinfo_135 = Thread(s) per core: 2 notes_plat_sysinfo_140 = Core(s) per socket: 16 notes_plat_sysinfo_145 = Socket(s): 2 notes_plat_sysinfo_150 = NUMA node(s): 32 notes_plat_sysinfo_155 = Vendor ID: AuthenticAMD notes_plat_sysinfo_160 = CPU family: 23 notes_plat_sysinfo_165 = Model: 49 notes_plat_sysinfo_170 = Model name: AMD EPYC 7F52 16-Core Processor notes_plat_sysinfo_175 = Stepping: 0 notes_plat_sysinfo_180 = CPU MHz: 3493.243 notes_plat_sysinfo_185 = BogoMIPS: 6986.48 notes_plat_sysinfo_190 = Virtualization: AMD-V notes_plat_sysinfo_195 = L1d cache: 32K notes_plat_sysinfo_200 = L1i cache: 32K notes_plat_sysinfo_205 = L2 cache: 512K notes_plat_sysinfo_210 = L3 cache: 16384K notes_plat_sysinfo_215 = NUMA node0 CPU(s): 0,32 notes_plat_sysinfo_220 = NUMA node1 CPU(s): 1,33 notes_plat_sysinfo_225 = NUMA node2 CPU(s): 2,34 notes_plat_sysinfo_230 = NUMA node3 CPU(s): 3,35 notes_plat_sysinfo_235 = NUMA node4 CPU(s): 4,36 notes_plat_sysinfo_240 = NUMA node5 CPU(s): 5,37 notes_plat_sysinfo_245 = NUMA node6 CPU(s): 6,38 notes_plat_sysinfo_250 = NUMA node7 CPU(s): 7,39 notes_plat_sysinfo_255 = NUMA node8 CPU(s): 8,40 notes_plat_sysinfo_260 = NUMA node9 CPU(s): 9,41 notes_plat_sysinfo_265 = NUMA node10 CPU(s): 10,42 notes_plat_sysinfo_270 = NUMA node11 CPU(s): 11,43 notes_plat_sysinfo_275 = NUMA node12 CPU(s): 12,44 notes_plat_sysinfo_280 = NUMA node13 CPU(s): 13,45 notes_plat_sysinfo_285 = NUMA node14 CPU(s): 14,46 notes_plat_sysinfo_290 = NUMA node15 CPU(s): 15,47 notes_plat_sysinfo_295 = NUMA node16 CPU(s): 16,48 notes_plat_sysinfo_300 = NUMA node17 CPU(s): 17,49 notes_plat_sysinfo_305 = NUMA node18 CPU(s): 18,50 notes_plat_sysinfo_310 = NUMA node19 CPU(s): 19,51 notes_plat_sysinfo_315 = NUMA node20 CPU(s): 20,52 notes_plat_sysinfo_320 = NUMA node21 CPU(s): 21,53 notes_plat_sysinfo_325 = NUMA node22 CPU(s): 22,54 notes_plat_sysinfo_330 = NUMA node23 CPU(s): 23,55 notes_plat_sysinfo_335 = NUMA node24 CPU(s): 24,56 notes_plat_sysinfo_340 = NUMA node25 CPU(s): 25,57 notes_plat_sysinfo_345 = NUMA node26 CPU(s): 26,58 notes_plat_sysinfo_350 = NUMA node27 CPU(s): 27,59 notes_plat_sysinfo_355 = NUMA node28 CPU(s): 28,60 notes_plat_sysinfo_360 = NUMA node29 CPU(s): 29,61 notes_plat_sysinfo_365 = NUMA node30 CPU(s): 30,62 notes_plat_sysinfo_370 = NUMA node31 CPU(s): 31,63 notes_plat_sysinfo_375 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_380 = pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm notes_plat_sysinfo_385 = constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni notes_plat_sysinfo_390 = pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx notes_plat_sysinfo_395 = f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse notes_plat_sysinfo_400 = 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext notes_plat_sysinfo_405 = perfctr_l2 mwaitx cpb cat_l3 cdp_l3 hw_pstate sme ssbd sev ibrs ibpb stibp vmmcall notes_plat_sysinfo_410 = fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni notes_plat_sysinfo_415 = xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_420 = clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean notes_plat_sysinfo_425 = flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif umip notes_plat_sysinfo_430 = rdpid overflow_recov succor smca notes_plat_sysinfo_435 = notes_plat_sysinfo_440 = /proc/cpuinfo cache data notes_plat_sysinfo_445 = cache size : 512 KB notes_plat_sysinfo_450 = notes_plat_sysinfo_455 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_460 = physical chip. notes_plat_sysinfo_465 = available: 32 nodes (0-31) notes_plat_sysinfo_470 = node 0 cpus: 0 32 notes_plat_sysinfo_475 = node 0 size: 15547 MB notes_plat_sysinfo_480 = node 0 free: 15416 MB notes_plat_sysinfo_485 = node 1 cpus: 1 33 notes_plat_sysinfo_490 = node 1 size: 16127 MB notes_plat_sysinfo_495 = node 1 free: 16029 MB notes_plat_sysinfo_500 = node 2 cpus: 2 34 notes_plat_sysinfo_505 = node 2 size: 16127 MB notes_plat_sysinfo_510 = node 2 free: 16029 MB notes_plat_sysinfo_515 = node 3 cpus: 3 35 notes_plat_sysinfo_520 = node 3 size: 16126 MB notes_plat_sysinfo_525 = node 3 free: 16026 MB notes_plat_sysinfo_530 = node 4 cpus: 4 36 notes_plat_sysinfo_535 = node 4 size: 16127 MB notes_plat_sysinfo_540 = node 4 free: 16014 MB notes_plat_sysinfo_545 = node 5 cpus: 5 37 notes_plat_sysinfo_550 = node 5 size: 16127 MB notes_plat_sysinfo_555 = node 5 free: 16030 MB notes_plat_sysinfo_560 = node 6 cpus: 6 38 notes_plat_sysinfo_565 = node 6 size: 16127 MB notes_plat_sysinfo_570 = node 6 free: 16029 MB notes_plat_sysinfo_575 = node 7 cpus: 7 39 notes_plat_sysinfo_580 = node 7 size: 16097 MB notes_plat_sysinfo_585 = node 7 free: 16000 MB notes_plat_sysinfo_590 = node 8 cpus: 8 40 notes_plat_sysinfo_595 = node 8 size: 16127 MB notes_plat_sysinfo_600 = node 8 free: 16027 MB notes_plat_sysinfo_605 = node 9 cpus: 9 41 notes_plat_sysinfo_610 = node 9 size: 16127 MB notes_plat_sysinfo_615 = node 9 free: 16027 MB notes_plat_sysinfo_620 = node 10 cpus: 10 42 notes_plat_sysinfo_625 = node 10 size: 16127 MB notes_plat_sysinfo_630 = node 10 free: 16018 MB notes_plat_sysinfo_635 = node 11 cpus: 11 43 notes_plat_sysinfo_640 = node 11 size: 16126 MB notes_plat_sysinfo_645 = node 11 free: 16021 MB notes_plat_sysinfo_650 = node 12 cpus: 12 44 notes_plat_sysinfo_655 = node 12 size: 16127 MB notes_plat_sysinfo_660 = node 12 free: 16013 MB notes_plat_sysinfo_665 = node 13 cpus: 13 45 notes_plat_sysinfo_670 = node 13 size: 16127 MB notes_plat_sysinfo_675 = node 13 free: 16027 MB notes_plat_sysinfo_680 = node 14 cpus: 14 46 notes_plat_sysinfo_685 = node 14 size: 16127 MB notes_plat_sysinfo_690 = node 14 free: 16026 MB notes_plat_sysinfo_695 = node 15 cpus: 15 47 notes_plat_sysinfo_700 = node 15 size: 16114 MB notes_plat_sysinfo_705 = node 15 free: 16018 MB notes_plat_sysinfo_710 = node 16 cpus: 16 48 notes_plat_sysinfo_715 = node 16 size: 16127 MB notes_plat_sysinfo_720 = node 16 free: 16007 MB notes_plat_sysinfo_725 = node 17 cpus: 17 49 notes_plat_sysinfo_730 = node 17 size: 16127 MB notes_plat_sysinfo_735 = node 17 free: 16028 MB notes_plat_sysinfo_740 = node 18 cpus: 18 50 notes_plat_sysinfo_745 = node 18 size: 16127 MB notes_plat_sysinfo_750 = node 18 free: 11551 MB notes_plat_sysinfo_755 = node 19 cpus: 19 51 notes_plat_sysinfo_760 = node 19 size: 16126 MB notes_plat_sysinfo_765 = node 19 free: 16029 MB notes_plat_sysinfo_770 = node 20 cpus: 20 52 notes_plat_sysinfo_775 = node 20 size: 16127 MB notes_plat_sysinfo_780 = node 20 free: 16020 MB notes_plat_sysinfo_785 = node 21 cpus: 21 53 notes_plat_sysinfo_790 = node 21 size: 16127 MB notes_plat_sysinfo_795 = node 21 free: 16027 MB notes_plat_sysinfo_800 = node 22 cpus: 22 54 notes_plat_sysinfo_805 = node 22 size: 16127 MB notes_plat_sysinfo_810 = node 22 free: 16025 MB notes_plat_sysinfo_815 = node 23 cpus: 23 55 notes_plat_sysinfo_820 = node 23 size: 16126 MB notes_plat_sysinfo_825 = node 23 free: 16027 MB notes_plat_sysinfo_830 = node 24 cpus: 24 56 notes_plat_sysinfo_835 = node 24 size: 16127 MB notes_plat_sysinfo_840 = node 24 free: 14142 MB notes_plat_sysinfo_845 = node 25 cpus: 25 57 notes_plat_sysinfo_850 = node 25 size: 16127 MB notes_plat_sysinfo_855 = node 25 free: 16030 MB notes_plat_sysinfo_860 = node 26 cpus: 26 58 notes_plat_sysinfo_865 = node 26 size: 16127 MB notes_plat_sysinfo_870 = node 26 free: 15992 MB notes_plat_sysinfo_875 = node 27 cpus: 27 59 notes_plat_sysinfo_880 = node 27 size: 16126 MB notes_plat_sysinfo_885 = node 27 free: 16027 MB notes_plat_sysinfo_890 = node 28 cpus: 28 60 notes_plat_sysinfo_895 = node 28 size: 16127 MB notes_plat_sysinfo_900 = node 28 free: 16008 MB notes_plat_sysinfo_905 = node 29 cpus: 29 61 notes_plat_sysinfo_910 = node 29 size: 16127 MB notes_plat_sysinfo_915 = node 29 free: 16018 MB notes_plat_sysinfo_920 = node 30 cpus: 30 62 notes_plat_sysinfo_925 = node 30 size: 16127 MB notes_plat_sysinfo_930 = node 30 free: 16027 MB notes_plat_sysinfo_935 = node 31 cpus: 31 63 notes_plat_sysinfo_940 = node 31 size: 16125 MB notes_plat_sysinfo_945 = node 31 free: 16029 MB notes_plat_sysinfo_950 = node distances: notes_plat_sysinfo_955 = node 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 notes_plat_sysinfo_960 = 20 21 22 23 24 25 26 27 28 29 30 31 notes_plat_sysinfo_965 = 0: 10 11 11 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_970 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_975 = 1: 11 10 11 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_980 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_985 = 2: 11 11 10 11 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_990 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_995 = 3: 11 11 11 10 12 12 12 12 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1000 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1005 = 4: 12 12 12 12 10 11 11 11 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1010 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1015 = 5: 12 12 12 12 11 10 11 11 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1020 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1025 = 6: 12 12 12 12 11 11 10 11 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1030 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1035 = 7: 12 12 12 12 11 11 11 10 12 12 12 12 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1040 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1045 = 8: 12 12 12 12 12 12 12 12 10 11 11 11 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1050 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1055 = 9: 12 12 12 12 12 12 12 12 11 10 11 11 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1060 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1065 = 10: 12 12 12 12 12 12 12 12 11 11 10 11 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1070 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1075 = 11: 12 12 12 12 12 12 12 12 11 11 11 10 12 12 12 12 32 32 32 32 notes_plat_sysinfo_1080 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1085 = 12: 12 12 12 12 12 12 12 12 12 12 12 12 10 11 11 11 32 32 32 32 notes_plat_sysinfo_1090 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1095 = 13: 12 12 12 12 12 12 12 12 12 12 12 12 11 10 11 11 32 32 32 32 notes_plat_sysinfo_1100 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1105 = 14: 12 12 12 12 12 12 12 12 12 12 12 12 11 11 10 11 32 32 32 32 notes_plat_sysinfo_1110 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1115 = 15: 12 12 12 12 12 12 12 12 12 12 12 12 11 11 11 10 32 32 32 32 notes_plat_sysinfo_1120 = 32 32 32 32 32 32 32 32 32 32 32 32 notes_plat_sysinfo_1125 = 16: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 10 11 11 11 notes_plat_sysinfo_1130 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1135 = 17: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 10 11 11 notes_plat_sysinfo_1140 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1145 = 18: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 10 11 notes_plat_sysinfo_1150 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1155 = 19: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 11 11 11 10 notes_plat_sysinfo_1160 = 12 12 12 12 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1165 = 20: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1170 = 10 11 11 11 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1175 = 21: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1180 = 11 10 11 11 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1185 = 22: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1190 = 11 11 10 11 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1195 = 23: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1200 = 11 11 11 10 12 12 12 12 12 12 12 12 notes_plat_sysinfo_1205 = 24: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1210 = 12 12 12 12 10 11 11 11 12 12 12 12 notes_plat_sysinfo_1215 = 25: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1220 = 12 12 12 12 11 10 11 11 12 12 12 12 notes_plat_sysinfo_1225 = 26: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1230 = 12 12 12 12 11 11 10 11 12 12 12 12 notes_plat_sysinfo_1235 = 27: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1240 = 12 12 12 12 11 11 11 10 12 12 12 12 notes_plat_sysinfo_1245 = 28: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1250 = 12 12 12 12 12 12 12 12 10 11 11 11 notes_plat_sysinfo_1255 = 29: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1260 = 12 12 12 12 12 12 12 12 11 10 11 11 notes_plat_sysinfo_1265 = 30: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1270 = 12 12 12 12 12 12 12 12 11 11 10 11 notes_plat_sysinfo_1275 = 31: 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 32 12 12 12 12 notes_plat_sysinfo_1280 = 12 12 12 12 12 12 12 12 11 11 11 10 notes_plat_sysinfo_1285 = notes_plat_sysinfo_1290 = From /proc/meminfo notes_plat_sysinfo_1295 = MemTotal: 527819264 kB notes_plat_sysinfo_1300 = HugePages_Total: 0 notes_plat_sysinfo_1305 = Hugepagesize: 2048 kB notes_plat_sysinfo_1310 = notes_plat_sysinfo_1315 = From /etc/*release* /etc/*version* notes_plat_sysinfo_1320 = os-release: notes_plat_sysinfo_1325 = NAME="SLES" notes_plat_sysinfo_1330 = VERSION="15-SP1" notes_plat_sysinfo_1335 = VERSION_ID="15.1" notes_plat_sysinfo_1340 = PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" notes_plat_sysinfo_1345 = ID="sles" notes_plat_sysinfo_1350 = ID_LIKE="suse" notes_plat_sysinfo_1355 = ANSI_COLOR="0;32" notes_plat_sysinfo_1360 = CPE_NAME="cpe:/o:suse:sles:15:sp1" notes_plat_sysinfo_1365 = notes_plat_sysinfo_1370 = uname -a: notes_plat_sysinfo_1375 = Linux linux-g3ob 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 (8fba516) notes_plat_sysinfo_1380 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_1385 = notes_plat_sysinfo_1390 = Kernel self-reported vulnerability status: notes_plat_sysinfo_1395 = notes_plat_sysinfo_1400 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_1405 = Microarchitectural Data Sampling: Not affected notes_plat_sysinfo_1410 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_1415 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled notes_plat_sysinfo_1420 = via prctl and seccomp notes_plat_sysinfo_1425 = CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization notes_plat_sysinfo_1430 = CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB: notes_plat_sysinfo_1435 = conditional, IBRS_FW, STIBP: conditional, RSB notes_plat_sysinfo_1440 = filling notes_plat_sysinfo_1445 = notes_plat_sysinfo_1450 = run-level 3 Apr 26 12:30 last=5 notes_plat_sysinfo_1455 = notes_plat_sysinfo_1460 = SPEC is set to: /mnt/ramdisk/cpu2017-1.1.0 notes_plat_sysinfo_1465 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_1470 = tmpfs tmpfs 225G 4.3G 221G 2% /mnt/ramdisk notes_plat_sysinfo_1475 = notes_plat_sysinfo_1480 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_1485 = BIOS: Dell Inc. 1.4.6 04/10/2020 notes_plat_sysinfo_1490 = Vendor: Dell Inc. notes_plat_sysinfo_1495 = Product: PowerEdge R7525 notes_plat_sysinfo_1500 = Product Family: PowerEdge notes_plat_sysinfo_1505 = Serial: 48LN333 notes_plat_sysinfo_1510 = notes_plat_sysinfo_1515 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_1520 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_1525 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_1530 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_1535 = Memory: notes_plat_sysinfo_1540 = 16x 802C80B3802C 36ASF4G72PZ-3G2E7 32 GB 2 rank 3200 notes_plat_sysinfo_1545 = 16x Not Specified Not Specified notes_plat_sysinfo_1550 = notes_plat_sysinfo_1555 = (End of data from sysinfo program) hw_cpu_name = AMD EPYC 7F52 hw_disk = 225 GB add more disk info here hw_memory001 = 503.368 GB fixme: If using DDR4, the format is: hw_memory002 = 'N GB (N x N GB nRxn PC4-nnnnX-X)' hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os001 = NAME="SLES" sw_state = Run level 3 (add definition here) # End of settings added by sysinfo_program 549.fotonik3d_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 538.imagick_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 526.blender_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 521.wrf_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 519.lbm_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 510.parest_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 508.namd_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 507.cactuBSSN_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 503.bwaves_r: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1