# Invocation command line: # /home/cpu2017-1.1.0-ic19.0u4/bin/harness/runcpu --nobuild --action validate --define default-platform-flags --define numcopies=128 --configfile ic19.0u4-lin-core-avx512-rate-20190909.cfg --define smt-on --define cores=64 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base --output_format all --nopower --runmode rate --tune base --size refrate fprate # output_root was not used for this run ############################################################################ #------------------------------------------------------------------------------ # This is a sample SPEC CPU2017 config file. It is applicable for: # # Compiler name/version: Intel(R) C/C++ and Fortran 19.0u4 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.5, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX512 tuning # # If you wish to build your own: # (1) Copy this to a new name # cd %SPEC%/config # copy this.cfg that.cfg # (2) Change items that are marked 'EDIT' (search for it) # # If you have different software or hardware, this config file may not work. # You may find a better config file for your system next to posted results: # http://www.spec.org/cpu2017/results # # Compiler issues: Contact your compiler vendor, not SPEC. # For SPEC help: http://www.spec.org/auto/cpu2017/Docs/techsupport.html #------------------------------------------------------------------------------ #--------- Preprocessor ------------------------------------------------------- # # Optionally edit if you wish: %define build_ncpus 8 # controls number of simultaneous compiles # Used to date the label %define version 20190909 # Used for the optimization tuning part of the label (not required) %if defined(%{noopt}) %define opt_label -noopt %elif defined(%{medopt}) %define opt_label -medopt %else %define opt_label %endif # Used for labeling static linked builds (not required) %if defined(%{static}) %define static_label -static %else %define static_label %endif #--------- Label -------------------------------------------------------------- # Arbitrary string, tags your binaries & directories. # Two Suggestions: # (1) Change this label as you try new ideas. label = ic19.0u4-lin-core-avx512-rate%{opt_label}%{static_label}-%{version} # (2) Make the label meaningful to YOU. #--------- Global Settings ---------------------------------------------------- # For info, see: # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname XXX # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#tune ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'label' to track binaries. # ######################################################## # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=0 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate command_add_redirect = 1 line_width = 1020 log_line_width = 1020 makeflags = -j%{build_ncpus} output_format = txt,cfg,pdf,csv preenv = 1 tune = base bench_post_setup = sync parallel_test = 1 mean_anyway = 1 reportable = 1 copies = 1 #Reference the flags Files flagsurl000=http://www.spec.org/cpu2017/flags/Intel-ic19.0u1-official-linux64.2019-07-09.xml %ifdef %{default-platform-flags} flagsurl001=http://www.spec.org/cpu2017/flags/Lenovo-Platform-SPECcpu2017-Flags-V1.2-CLX-F.xml %endif # Set some environment variables intrate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64:$[top]/lib/ia32:$[top]/je5.0.1-32 fprate: preENV_LD_LIBRARY_PATH = $[top]/lib/intel64 # Affinitization # For UP systems, we need to know if the processors are ordered across cores first or in order # If across cores, processors 0, 1, 2 and 3 are on distinct physical cores # Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores default: submit = numactl --localalloc --physcpubind=$SPECCOPYNUM -- $command %ifdef %{no-numa} submit = taskset -c $SPECCOPYNUM $command %endif #--------- Compilers ---------------------------------------------------------- intrate,fprate: CC = icc -m64 -std=c11 CXX = icpc -m64 FC = ifort -m64 default: # How to say "Show me your version, please" CC_VERSION_OPTION = -V CXX_VERSION_OPTION = -V FC_VERSION_OPTION = -V JEMALLOC32_DIR = /usr/local/je5.0.1-32/lib JEMALLOC64_DIR = /usr/local/je5.0.1-64/lib INTEL64_DIR = /usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/intel64 %if !defined(%{static}) JEMALLOC32 = jemalloc JEMALLOC64 = jemalloc QKMALLOC = qkmalloc %else JEMALLOC32 = libjemalloc.a JEMALLOC64 = libjemalloc.a %endif #--------- Portability -------------------------------------------------------- intrate,fprate: PORTABILITY= -DSPEC_LP64 500.perlbench_r: CPORTABILITY = -DSPEC_LINUX_X64 521.wrf_r: CPORTABILITY = -DSPEC_CASE_FLAG FPORTABILITY= -convert big_endian 523.xalancbmk_r: CXXPORTABILITY=-DSPEC_LINUX 526.blender_r: CPORTABILITY= -DSPEC_LINUX -funsigned-char 527.cam4_r: CPORTABILITY= -DSPEC_CASE_FLAG #--------- How Many CPUs? ----------------------------------------------------- # Both SPECrate and SPECspeed can test multiple chips / cores / hw threads # - For SPECrate, you set the number of copies. # See: https://www.spec.org/cpu2017/Docs/system-requirements.html#MultipleCPUs # # q. How many should I set? # a. Unknown, you will have to try it and see! # # To get you started, some suggestions: # # copies - This config file, if numcopies not defined or copies are not specified, # defaults to testing only 1 copy. You might # try changing it to match the number of cores on your system, # or perhaps the number of virtual CPUs as reported by: # grep -c processor /proc/cpuinfo # Be sure you have enough memory. See: # https://www.spec.org/cpu2017/Docs/system-requirements.html#memory # default: %if defined (%{numcopies}) copies = %{numcopies} %else copies = 1 # EDIT to change number of copies (see above) %endif #-------- Tuning Flags ------------------------------------------------- intspeed,fpspeed: #reconsider using a speed config file instead of a rate config file fail=1 intrate,fprate: SSE = -xCORE-AVX512 EXTRA_FOPTIMIZE = -nostandard-realloc-lhs -align array32byte intrate=default: EXTRA_LIBS = -L$(INTEL64_DIR) -l$(QKMALLOC) EXTRA_LDFLAGS = -Wl,-z,muldefs intrate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif fprate=base: %if defined(%{noopt}) OPT_ROOT = -O0 %elif defined(%{medopt}) OPT_ROOT = -O2 %else OPT_ROOT = -ipo -O3 -no-prec-div %endif FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif intrate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-mem-layout-trans=4 %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-mem-layout-trans=4 %endif fprate=peak: %if defined(%{noopt}) || defined(%{medopt}) #not building or executing peak against less opt fail=1 %endif PASS1_CFLAGS = -prof-gen PASS2_CFLAGS = -prof-use PASS1_FFLAGS = -prof-gen PASS2_FFLAGS = -prof-use PASS1_CXXFLAGS = -prof-gen PASS2_CXXFLAGS = -prof-use PASS1_LDFLAGS = -prof-gen PASS2_LDFLAGS = -prof-use OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS1 = $(OPT_ROOT) FAST_PASS1 = $(OPT_ROOT) -static FORT_FAST_PASS1 = $(OPT_ROOT) -static FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC_PASS2 = $(SSE) $(OPT_ROOT) FAST_PASS2 = $(SSE) $(OPT_ROOT) -static FORT_FAST_PASS2 = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) PASS1_COPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_NO_STATIC_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %else PASS1_COPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_CXXOPTIMIZE = $(FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS1_FOPTIMIZE = $(FORT_FAST_PASS1) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_COPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_CXXOPTIMIZE = $(FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 PASS2_FOPTIMIZE = $(FORT_FAST_PASS2) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %endif #some benchmarks do not want to share a core %if defined (%{smt-on}) %define numpeakcopies %{cores} 503.bwaves_r,510.parest_r,521.wrf_r,554.roms_r=peak: copies = %{numpeakcopies} %endif 500.perlbench_r=peak=default: #[56]00.perlbench[rs] has non standard signed overflow EXTRA_OPTIMIZE = -fno-strict-overflow 525.x264_r=peak: EXTRA_OPTIMIZE = -fno-alias 502.gcc_r,523.xalancbmk_r=peak: CC = icc -m32 -std=c11 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/ia32_lin CXX = icpc -m32 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/ia32_lin FC = ifort -m32 -L/usr/local/IntelCompiler19/compilers_and_libraries_2019.4.227/linux/compiler/lib/ia32_lin EXTRA_LIBS = -L$(JEMALLOC32_DIR) -l$(JEMALLOC32) EXTRA_LDFLAGS = -Wl,-z,muldefs #Change portability for 32b, large file support for safety PORTABILITY = -D_FILE_OFFSET_BITS=64 #int rate subset for removing FDO 505.mcf_r,557.xz_r,520.omnetpp_r,525.x264_r,548.exchange2_r,531.deepsjeng_r,541.leela_r=peak: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-mem-layout-trans=4 %else COPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-mem-layout-trans=4 %endif #fp rate subset for removing FDO 503.bwaves_r,507.cactuBSSN_r,510.parest_r,526.blender_r,538.imagick_r,544.nab_r,549.fotonik3d_r=peak=default: feedback = 0 OPT_ROOT = -ipo -O3 -no-prec-div FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FORT_FAST_NO_STATIC = $(SSE) $(OPT_ROOT) FAST = $(SSE) $(OPT_ROOT) -static FORT_FAST = $(SSE) $(OPT_ROOT) -static %if !defined(%{static}) COPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST_NO_STATIC) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) CXXOPTIMIZE = $(OPT_ROOT) FOPTIMIZE = $(OPT_ROOT) %endif %else COPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 CXXOPTIMIZE = $(FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 FOPTIMIZE = $(FORT_FAST) -qopt-prefetch -ffinite-math-only -qopt-mem-layout-trans=4 -auto %if defined(%{noopt}) COPTIMIZE = $(OPT_ROOT) -static CXXOPTIMIZE = $(OPT_ROOT) -static FOPTIMIZE = $(OPT_ROOT) -static %endif %endif #------------------------------------------------------------------------------- # Tester and System Descriptions - EDIT the sections below #------------------------------------------------------------------------------- # For info about any field, see # https://www.spec.org/auto/cpu2017/Docs/config.html#fieldname # Example: https://www.spec.org/auto/cpu2017/Docs/config.html#hw_memory #------------------------------------------------------------------------------- #--------- If you install new compilers, EDIT this section -------------------- intrate,intspeed,fpspeed,fprate: sw_compiler000 = C/C++: Version 19.0.4.227 of Intel sw_compiler001 = C/C++ sw_compiler002 = Compiler for Linux; sw_compiler003 = Fortran: Version 19.0.4.227 of sw_compiler004 = Intel Fortran sw_compiler005 = Compiler for Linux sw_base_ptrsize = 64-bit fprate,fpspeed: sw_peak_ptrsize = Not Applicable sw_other = None power_management = Disable intspeed: sw_peak_ptrsize = 64-bit sw_other001 = jemalloc memory allocator V5.0.1 intrate: sw_peak_ptrsize = 32/64-bit sw_other001 = jemalloc memory allocator V5.0.1 #--------- EDIT Your info --------------------------------------------------------- # To understand the difference between hw_vendor/sponsor/tester, see: # www.spec.org/auto/cpu2017/Docs/config.html#test_sponsor intrate,intspeed,fprate,fpspeed: # Important: keep this line hw_vendor = Lenovo Global Technology tester = Lenovo Global Technology test_sponsor = Lenovo Global Technology license_num = 9017 prepared_by = Lenovo Global Technology #--------- EDIT system availability dates and system information ---------------------------------------------- intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field hw_avail = Apr-2019 sw_avail = May-2019 hw_cpu_nominal_mhz = 2300 hw_cpu_max_mhz = 3900 hw_ncores = 64 hw_nthreadspercore = 2 hw_ncpuorder = 2,4 chips hw_model000 = ThinkSystem SR860 hw_model001 = (2.30 GHz, Intel Xeon Gold 5218B) hw_other = None # sw_other = # TurboHeap Library V8.1 # Other perf-relevant sw, or "None" hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 1 MB I+D on chip per core hw_tcache = 22 MB I+D on chip per chip hw_ocache = None # hw_memory001 = # 4 TB (256 x 16 GB 2Rx4 PC4-2133P-R, # N GB (M x N GB nRxn # hw_memory002 = # running at 1600 MHz) # PCn-nnnnnR-n[, ECC and other info]) #--------- Sysinfo fields - You may need to adjust this section --------------- # Note: Some commented-out fields above are automatically set to preliminary # values by sysinfo # www.spec.org/auto/cpu2017/Docs/config.html#sysinfo # Uncomment lines for which you already have a better answer than sysinfo # intrate,intspeed,fprate,fpspeed: # Important: keep this line # Example # Brief info about field # hw_cpu_name = # Intel Xeon E9-9999 v9 # chip name # hw_disk = # 9 x 9 TB SATA III 9999 RPM # Size, type, other perf-relevant info # hw_nchips = # 99 # number chips enabled # sw_file = # ext99 # File system # sw_state = # Run level 99 # Software state. # sw_os001 = # Linux Sailboat # Operating system # sw_os002 = # Distribution 7.2 SP1 # and version #--------- EDIT Intel Recommended Fields - You may wish to adjust this section ----- default: notes_000 = Binaries compiled on a system with 1x Intel Core i9-799X CPU + 32GB RAM notes_005 = memory using Redhat Enterprise Linux 7.5 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Tmpfs filesystem can be set with: notes_os_010 = mount -t tmpfs -o size=800g tmpfs /home notes_os_015 = Process tuning setting: notes_os_020 = echo 50000 > /proc/sys/kernel/sched_cfs_bandwidth_slice_us notes_os_025 = echo 240000000 > /proc/sys/kernel/sched_latency_ns notes_os_030 = echo 5000000 > /proc/sys/kernel/sched_migration_cost_ns notes_os_035 = echo 100000000 > /proc/sys/kernel/sched_min_granularity_ns notes_os_040 = echo 150000000 > /proc/sys/kernel/sched_wakeup_granularity_ns #Ease of tagging results from the runcpu command line with commands run outside of runcpu harneess #Adjust as necessary for your SUT %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_010 = Transparent Huge Pages enabled by default %endif %ifdef %{drop_caches} notes_015 = Prior to runcpu invocation notes_020 = Filesystem page cache synced and cleared with: notes_025 = sync; echo 3> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_030 = runcpu command invoked through numactl i.e.: notes_035 = numactl --interleave=all runcpu notes_040 =NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) notes_045 =is mitigated in the system as tested and documented. notes_050 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) notes_055 =is mitigated in the system as tested and documented. notes_060 =Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) notes_065 =is mitigated in the system as tested and documented. notes_070 =Yes: The test sponsor attests, as of date of publication, that CVE-2018-3640 (Spectre variant 3a) notes_075 =is mitigated in the system as tested and documented. notes_080 =Yes: The test sponsor attests, as of date of publication, that CVE-2018-3639 (Spectre variant 4) notes_085 =is mitigated in the system as tested and documented. %endif intrate,fprate: %if defined(%{no-numa}) notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %else notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %endif intrate,intspeed: notes_jemalloc_003 = jemalloc, a general purpose malloc implementation notes_jemalloc_004 = built with the RedHat Enterprise 7.5, and the system compiler gcc 4.8.5 notes_jemalloc_005 = sources available from jemalloc.net or https://github.com/jemalloc/jemalloc/releases # The following settings were obtained by running the sysinfo_program # 'specperl $[top]/bin/sysinfo' (sysinfo:SHA:1b187da62efa5d65f0e989c214b6a257d16a31d3cf135973c9043da741052207) default: notes_plat_sysinfo_000 = notes_plat_sysinfo_005 = Sysinfo program /home/cpu2017-1.1.0-ic19.0u4/bin/sysinfo notes_plat_sysinfo_010 = Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011 notes_plat_sysinfo_015 = running on linux-6lsv Fri Nov 8 17:12:49 2019 notes_plat_sysinfo_020 = notes_plat_sysinfo_025 = SUT (System Under Test) info as seen by some common utilities. notes_plat_sysinfo_030 = For more information on this section, see notes_plat_sysinfo_035 = https://www.spec.org/cpu2017/Docs/config.html#sysinfo notes_plat_sysinfo_040 = notes_plat_sysinfo_045 = From /proc/cpuinfo notes_plat_sysinfo_050 = model name : Intel(R) Xeon(R) Gold 5218 CPU @ 2.30GHz notes_plat_sysinfo_055 = 4 "physical id"s (chips) notes_plat_sysinfo_060 = 128 "processors" notes_plat_sysinfo_065 = cores, siblings (Caution: counting these is hw and system dependent. The following notes_plat_sysinfo_070 = excerpts from /proc/cpuinfo might not be reliable. Use with caution.) notes_plat_sysinfo_075 = cpu cores : 16 notes_plat_sysinfo_080 = siblings : 32 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_095 = physical 2: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_100 = physical 3: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 notes_plat_sysinfo_105 = notes_plat_sysinfo_110 = From lscpu: notes_plat_sysinfo_115 = Architecture: x86_64 notes_plat_sysinfo_120 = CPU op-mode(s): 32-bit, 64-bit notes_plat_sysinfo_125 = Byte Order: Little Endian notes_plat_sysinfo_130 = CPU(s): 128 notes_plat_sysinfo_135 = On-line CPU(s) list: 0-127 notes_plat_sysinfo_140 = Thread(s) per core: 2 notes_plat_sysinfo_145 = Core(s) per socket: 16 notes_plat_sysinfo_150 = Socket(s): 4 notes_plat_sysinfo_155 = NUMA node(s): 8 notes_plat_sysinfo_160 = Vendor ID: GenuineIntel notes_plat_sysinfo_165 = CPU family: 6 notes_plat_sysinfo_170 = Model: 85 notes_plat_sysinfo_175 = Model name: Intel(R) Xeon(R) Gold 5218 CPU @ 2.30GHz notes_plat_sysinfo_180 = Stepping: 6 notes_plat_sysinfo_185 = CPU MHz: 2300.000 notes_plat_sysinfo_190 = CPU max MHz: 3900.0000 notes_plat_sysinfo_195 = CPU min MHz: 1000.0000 notes_plat_sysinfo_200 = BogoMIPS: 4600.00 notes_plat_sysinfo_205 = Virtualization: VT-x notes_plat_sysinfo_210 = L1d cache: 32K notes_plat_sysinfo_215 = L1i cache: 32K notes_plat_sysinfo_220 = L2 cache: 1024K notes_plat_sysinfo_225 = L3 cache: 22528K notes_plat_sysinfo_230 = NUMA node0 CPU(s): 0-3,8-11,64-67,72-75 notes_plat_sysinfo_235 = NUMA node1 CPU(s): 4-7,12-15,68-71,76-79 notes_plat_sysinfo_240 = NUMA node2 CPU(s): 16-19,24-27,80-83,88-91 notes_plat_sysinfo_245 = NUMA node3 CPU(s): 20-23,28-31,84-87,92-95 notes_plat_sysinfo_250 = NUMA node4 CPU(s): 32-35,40-43,96-99,104-107 notes_plat_sysinfo_255 = NUMA node5 CPU(s): 36-39,44-47,100-103,108-111 notes_plat_sysinfo_260 = NUMA node6 CPU(s): 48-51,56-59,112-115,120-123 notes_plat_sysinfo_265 = NUMA node7 CPU(s): 52-55,60-63,116-119,124-127 notes_plat_sysinfo_270 = Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov notes_plat_sysinfo_275 = pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp notes_plat_sysinfo_280 = lm constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid notes_plat_sysinfo_285 = aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 notes_plat_sysinfo_290 = xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave notes_plat_sysinfo_295 = avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb cat_l3 cdp_l3 notes_plat_sysinfo_300 = invpcid_single intel_ppin ssbd mba ibrs ibpb stibp tpr_shadow vnmi flexpriority ept notes_plat_sysinfo_305 = vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm mpx rdt_a notes_plat_sysinfo_310 = avx512f avx512dq rdseed adx smap clflushopt clwb intel_pt avx512cd avx512bw avx512vl notes_plat_sysinfo_315 = xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local notes_plat_sysinfo_320 = dtherm ida arat pln pts pku ospke avx512_vnni flush_l1d arch_capabilities notes_plat_sysinfo_325 = notes_plat_sysinfo_330 = /proc/cpuinfo cache data notes_plat_sysinfo_335 = cache size : 22528 KB notes_plat_sysinfo_340 = notes_plat_sysinfo_345 = From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a notes_plat_sysinfo_350 = physical chip. notes_plat_sysinfo_355 = available: 8 nodes (0-7) notes_plat_sysinfo_360 = node 0 cpus: 0 1 2 3 8 9 10 11 64 65 66 67 72 73 74 75 notes_plat_sysinfo_365 = node 0 size: 193135 MB notes_plat_sysinfo_370 = node 0 free: 179891 MB notes_plat_sysinfo_375 = node 1 cpus: 4 5 6 7 12 13 14 15 68 69 70 71 76 77 78 79 notes_plat_sysinfo_380 = node 1 size: 193498 MB notes_plat_sysinfo_385 = node 1 free: 189141 MB notes_plat_sysinfo_390 = node 2 cpus: 16 17 18 19 24 25 26 27 80 81 82 83 88 89 90 91 notes_plat_sysinfo_395 = node 2 size: 193527 MB notes_plat_sysinfo_400 = node 2 free: 193339 MB notes_plat_sysinfo_405 = node 3 cpus: 20 21 22 23 28 29 30 31 84 85 86 87 92 93 94 95 notes_plat_sysinfo_410 = node 3 size: 193527 MB notes_plat_sysinfo_415 = node 3 free: 193360 MB notes_plat_sysinfo_420 = node 4 cpus: 32 33 34 35 40 41 42 43 96 97 98 99 104 105 106 107 notes_plat_sysinfo_425 = node 4 size: 193527 MB notes_plat_sysinfo_430 = node 4 free: 193363 MB notes_plat_sysinfo_435 = node 5 cpus: 36 37 38 39 44 45 46 47 100 101 102 103 108 109 110 111 notes_plat_sysinfo_440 = node 5 size: 193527 MB notes_plat_sysinfo_445 = node 5 free: 193369 MB notes_plat_sysinfo_450 = node 6 cpus: 48 49 50 51 56 57 58 59 112 113 114 115 120 121 122 123 notes_plat_sysinfo_455 = node 6 size: 193527 MB notes_plat_sysinfo_460 = node 6 free: 193350 MB notes_plat_sysinfo_465 = node 7 cpus: 52 53 54 55 60 61 62 63 116 117 118 119 124 125 126 127 notes_plat_sysinfo_470 = node 7 size: 193525 MB notes_plat_sysinfo_475 = node 7 free: 193357 MB notes_plat_sysinfo_480 = node distances: notes_plat_sysinfo_485 = node 0 1 2 3 4 5 6 7 notes_plat_sysinfo_490 = 0: 10 11 21 21 21 21 31 31 notes_plat_sysinfo_495 = 1: 11 10 21 21 21 21 31 31 notes_plat_sysinfo_500 = 2: 21 21 10 11 31 31 21 21 notes_plat_sysinfo_505 = 3: 21 21 11 10 31 31 21 21 notes_plat_sysinfo_510 = 4: 21 21 31 31 10 11 21 21 notes_plat_sysinfo_515 = 5: 21 21 31 31 11 10 21 21 notes_plat_sysinfo_520 = 6: 31 31 21 21 21 21 10 11 notes_plat_sysinfo_525 = 7: 31 31 21 21 21 21 11 10 notes_plat_sysinfo_530 = notes_plat_sysinfo_535 = From /proc/meminfo notes_plat_sysinfo_540 = MemTotal: 1584945232 kB notes_plat_sysinfo_545 = HugePages_Total: 0 notes_plat_sysinfo_550 = Hugepagesize: 2048 kB notes_plat_sysinfo_555 = notes_plat_sysinfo_560 = From /etc/*release* /etc/*version* notes_plat_sysinfo_565 = SuSE-release: notes_plat_sysinfo_570 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_575 = VERSION = 12 notes_plat_sysinfo_580 = PATCHLEVEL = 4 notes_plat_sysinfo_585 = # This file is deprecated and will be removed in a future service pack or release. notes_plat_sysinfo_590 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_595 = os-release: notes_plat_sysinfo_600 = NAME="SLES" notes_plat_sysinfo_605 = VERSION="12-SP4" notes_plat_sysinfo_610 = VERSION_ID="12.4" notes_plat_sysinfo_615 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP4" notes_plat_sysinfo_620 = ID="sles" notes_plat_sysinfo_625 = ANSI_COLOR="0;32" notes_plat_sysinfo_630 = CPE_NAME="cpe:/o:suse:sles:12:sp4" notes_plat_sysinfo_635 = notes_plat_sysinfo_640 = uname -a: notes_plat_sysinfo_645 = Linux linux-6lsv 4.12.14-94.41-default #1 SMP Wed Oct 31 12:25:04 UTC 2018 (3090901) notes_plat_sysinfo_650 = x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_655 = notes_plat_sysinfo_660 = Kernel self-reported vulnerability status: notes_plat_sysinfo_665 = notes_plat_sysinfo_670 = CVE-2018-3620 (L1 Terminal Fault): Not affected notes_plat_sysinfo_675 = Microarchitectural Data Sampling: No status reported notes_plat_sysinfo_680 = CVE-2017-5754 (Meltdown): Not affected notes_plat_sysinfo_685 = CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled notes_plat_sysinfo_690 = via prctl and seccomp notes_plat_sysinfo_695 = CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization notes_plat_sysinfo_700 = CVE-2017-5715 (Spectre variant 2): Mitigation: Indirect Branch Restricted notes_plat_sysinfo_705 = Speculation, IBPB, IBRS_FW notes_plat_sysinfo_710 = notes_plat_sysinfo_715 = run-level 3 Nov 8 17:01 notes_plat_sysinfo_720 = notes_plat_sysinfo_725 = SPEC is set to: /home/cpu2017-1.1.0-ic19.0u4 notes_plat_sysinfo_730 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_735 = tmpfs tmpfs 800G 8.3G 792G 2% /home notes_plat_sysinfo_740 = notes_plat_sysinfo_745 = From /sys/devices/virtual/dmi/id notes_plat_sysinfo_750 = BIOS: Lenovo -[TEE141E-2.30]- 07/02/2019 notes_plat_sysinfo_755 = Vendor: Lenovo notes_plat_sysinfo_760 = Product: ThinkSystem SR860 -[7X7025Z000]- notes_plat_sysinfo_765 = Product Family: ThinkSystem notes_plat_sysinfo_770 = Serial: none notes_plat_sysinfo_775 = notes_plat_sysinfo_780 = Additional information from dmidecode follows. WARNING: Use caution when you interpret notes_plat_sysinfo_785 = this section. The 'dmidecode' program reads system data which is "intended to allow notes_plat_sysinfo_790 = hardware to be accurately determined", but the intent may not be met, as there are notes_plat_sysinfo_795 = frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_800 = Memory: notes_plat_sysinfo_805 = 48x Samsung M393A4K40CB2-CVF 32 GB 2 rank 2933, configured at 2666 notes_plat_sysinfo_810 = notes_plat_sysinfo_815 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon Gold 5218B hw_disk = 800 GB tmpfs hw_memory000 = 1536 GB (48 x 32 GB 2Rx4 PC4-2933Y-R, running at hw_memory001 = 2666) hw_nchips = 4 prepared_by = root (is never output, only tags rawfile) sw_file = tmpfs sw_os000 = SUSE Linux Enterprise Server 12 SP4 (x86_64) sw_os001 = Kernel 4.12.14-94.41-default sw_state = Run level 3 (multi-user) # End of settings added by sysinfo_program # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: fw_bios000 = Lenovo BIOS Version TEE142E 2.30 released Aug-2019 fw_bios001 = tested as TEE141E 2.30 Jul-2019 notes_plat_form_000 =BIOS configuration: notes_plat_form_005 =Choose Operating Mode set to Maximum Performance and then set it to Custom Mode notes_plat_form_010 =C-States set to Legacy notes_plat_form_015 =SNC set to Enable notes_plat_update_000=The marketing name for the processor in this result, which appears in the CPU name and hardware notes_plat_update_005=model areas, is different from sysinfo because a pre-production processor was used. The notes_plat_update_010=pre-production processor differs from the production processor in name only.