SPEC CPU(R)2017 Floating Point Speed Result Hewlett Packard Enterprise ProLiant DL325 Gen10 (2.00 GHz, AMD EPYC 7702P) Test Sponsor: HPE CPU2017 License: 003 Test date: Aug-2019 Test sponsor: HPE Hardware availability: Oct-2019 Tested by: HPE Software availability: Aug-2019 Base Base Base Base Base Base Base Peak Peak Peak Peak Peak Peak Peak Benchmarks Threads RunTime Ratio Energy MaxPwr AvgPwr ERatio Threads RunTime Ratio Energy MaxPwr AvgPwr ERatio --------------- ------- ------- ------ ------ ------ ------ ------ ------- ------- ------ ------ ------ ------ ------ 603.bwaves_s 64 167 354 65.4 399 392 985 * 64 167 354 65.4 399 392 985 * 603.bwaves_s 64 167 354 65.6 399 394 981 S 64 167 354 65.6 399 394 981 S 603.bwaves_s 64 167 354 65.5 399 393 982 S 64 167 354 65.5 399 393 982 S 607.cactuBSSN_s 64 81.0 206 29.2 376 361 624 * 64 80.4 207 29.1 377 362 626 S 607.cactuBSSN_s 64 81.8 204 29.5 376 361 618 S 64 81.7 204 29.5 376 361 618 S 607.cactuBSSN_s 64 80.8 206 29.1 376 360 627 S 64 80.5 207 29.0 376 361 628 * 619.lbm_s 64 163 32.2 61.3 383 377 97.1 * 64 163 32.2 61.3 383 377 97.1 * 619.lbm_s 64 162 32.3 61.4 384 378 97.0 S 64 162 32.3 61.4 384 378 97.0 S 619.lbm_s 64 163 32.2 61.6 384 378 96.6 S 64 163 32.2 61.6 384 378 96.6 S 621.wrf_s 64 100 132 34.9 359 348 413 S 64 99.8 132 34.8 358 349 415 S 621.wrf_s 64 100 132 34.9 359 349 413 * 64 99.2 133 34.6 358 349 417 S 621.wrf_s 64 99.4 133 34.8 359 350 415 S 64 99.5 133 34.8 359 349 416 * 627.cam4_s 64 103 86.0 37.3 394 362 258 S 64 103 86.0 37.3 394 362 258 S 627.cam4_s 64 103 85.9 37.4 393 362 258 * 64 103 85.9 37.4 393 362 258 * 627.cam4_s 64 103 85.9 37.5 394 363 257 S 64 103 85.9 37.5 394 363 257 S 628.pop2_s 64 181 65.6 62.1 355 343 210 * 64 181 65.6 62.1 355 343 210 * 628.pop2_s 64 182 65.4 62.2 355 342 210 S 64 182 65.4 62.2 355 342 210 S 628.pop2_s 64 180 65.8 62.0 357 344 211 S 64 180 65.8 62.0 357 344 211 S 638.imagick_s 64 72.4 199 22.6 358 313 694 * 64 72.4 199 22.6 358 313 694 * 638.imagick_s 64 71.5 202 22.4 351 313 703 S 64 71.5 202 22.4 351 313 703 S 638.imagick_s 64 72.5 199 22.8 350 314 690 S 64 72.5 199 22.8 350 314 690 S 644.nab_s 64 58.0 301 19.9 356 343 955 S 64 58.0 301 19.9 356 343 955 S 644.nab_s 64 58.3 300 19.9 356 342 953 S 64 58.3 300 19.9 356 342 953 S 644.nab_s 64 58.1 301 20.0 356 344 950 * 64 58.1 301 20.0 356 344 950 * 649.fotonik3d_s 64 149 61.4 52.6 381 354 194 S 64 149 61.4 52.6 381 354 194 S 649.fotonik3d_s 64 149 61.3 52.6 380 353 195 * 64 149 61.3 52.6 380 353 195 * 649.fotonik3d_s 64 150 60.7 52.9 380 353 193 S 64 150 60.7 52.9 380 353 193 S 654.roms_s 64 101 156 39.7 399 393 443 S 64 101 156 39.7 399 393 443 * 654.roms_s 64 101 155 39.7 398 391 444 S 64 101 156 39.5 399 392 446 S 654.roms_s 64 101 156 39.7 398 392 443 * 64 101 156 39.8 399 393 443 S =========================================================================================================================== 603.bwaves_s 64 167 354 65.4 399 392 985 * 64 167 354 65.4 399 392 985 * 607.cactuBSSN_s 64 81.0 206 29.2 376 361 624 * 64 80.5 207 29.0 376 361 628 * 619.lbm_s 64 163 32.2 61.3 383 377 97.1 * 64 163 32.2 61.3 383 377 97.1 * 621.wrf_s 64 100 132 34.9 359 349 413 * 64 99.5 133 34.8 359 349 416 * 627.cam4_s 64 103 85.9 37.4 393 362 258 * 64 103 85.9 37.4 393 362 258 * 628.pop2_s 64 181 65.6 62.1 355 343 210 * 64 181 65.6 62.1 355 343 210 * 638.imagick_s 64 72.4 199 22.6 358 313 694 * 64 72.4 199 22.6 358 313 694 * 644.nab_s 64 58.1 301 20.0 356 344 950 * 64 58.1 301 20.0 356 344 950 * 649.fotonik3d_s 64 149 61.3 52.6 380 353 195 * 64 149 61.3 52.6 380 353 195 * 654.roms_s 64 101 156 39.7 398 392 443 * 64 101 156 39.7 399 393 443 * SPECspeed(R)2017_fp_energy_base 387 SPECspeed(R)2017_fp_base 126 SPECspeed(R)2017_fp_energy_peak 388 SPECspeed(R)2017_fp_peak 126 HARDWARE -------- CPU Name: AMD EPYC 7702P Max MHz: 3350 Nominal: 2000 Enabled: 64 cores, 1 chip Orderable: 1 chip Cache L1: 32 KB I + 32 KB D on chip per core L2: 512 KB I+D on chip per core L3: 256 MB I+D on chip per chip, 16 MB shared / 4 cores Other: None Memory: 256 GB (8 x 32 GB 2Rx4 PC4-2933Y-L) Storage: 1 x HPE 480 GB SATA 6G SSD Other: None SOFTWARE -------- OS: SUSE Linux Enterprise Server 15 (x86_64) SP1 Kernel 4.12.14-195-default Compiler: C/C++/Fortran: Version 2.0.0 of AOCC Parallel: Yes Firmware: HPE BIOS Version A41 07/20/2019 released Aug-2019 File System: btrfs System State: Run level 3 (multi-user) Base Pointers: 64-bit Peak Pointers: 64-bit Other: jemalloc: jemalloc memory allocator library v5.2.0 Power Management: Disabled POWER ----- Max. Power (W): 400.27 Idle Power (W): 191.07 Min. Temperature (C): 20.75 Elevation (m): 132 Line Standard: 208 V / 60 Hz / 1 phase / 2 wires Provisioning: Line-powered POWER SETTINGS -------------- Management FW: Version 1.43 of iLO5 released May 23 2019 Memory Mode: Normal POWER-RELEVANT HARDWARE ----------------------- Power Supply: 1 x 800 W (non-redundant) Details: HPE 800W Flex Slot Titanium Hot Plug Low Halogen Power Supply Kit (865438-B21) Backplane: 8 SFF NVMe with optional optical drive Other Storage: Embedded SATA Controller Storage Model #s: P05976-B21 NICs Installed: 1 x HPE Ethernet 4-port 331i Adapter @ 1 Gb NICs Enabled (FW/OS): 4 / 4 NICs Connected/Speed: 2 @ 1 Gb Other HW Model #s: 7 x High Performance fans POWER ANALYZER -------------- Power Analyzer: 10.216.1.15:8888 Hardware Vendor: Yokogawa Model: YokogawaWT210 Serial Number: 91K308562 Input Connection: GPIB via NI GIPB-USB-HS Metrology Institute: NIST Calibration By: TRANSCAT Calibration Label: 5-E553M-20-1 Calibration Date: 21-May-2019 PTDaemon(TM) Version: 1.9.1 (a2d19f26; 2019-07-17) Setup Description: SUT Power Supply 1 via neoXt NXB 20815 Current Ranges Used: 1A, 2A Voltage Range Used: 300V TEMPERATURE METER ----------------- Temperature Meter: 10.216.1.15:8889 Hardware Vendor: Digi International Inc. Model: DigiWATCHPORT_H Serial Number: V45297862 Input Connection: USB PTDaemon Version: 1.9.1 (a2d19f26; 2019-07-17) Setup Description: 5 mm in front of SUT main intake Compiler Notes -------------- The AMD64 AOCC Compiler Suite is available at http://developer.amd.com/amd-aocc/ Submit Notes ------------ The config file option 'submit' was used. 'numactl' was used to bind copies to the cores. See the configuration file for details. Operating System Notes ---------------------- 'ulimit -s unlimited' was used to set environment stack size 'ulimit -l 2097152' was used to set environment locked pages in memory limit runcpu command invoked through numactl i.e.: numactl --interleave=all runcpu Set dirty_ratio=8 to limit dirty cache to 8% of memory Set swappiness=1 to swap only if necessary Set zone_reclaim_mode=1 to free local node memory and avoid remote memory sync then drop_caches=3 to reset caches before invoking runcpu dirty_ratio, swappiness, zone_reclaim_mode and drop_caches were all set using privileged echo (e.g. echo 1 > /proc/sys/vm/swappiness). Transparent huge pages set to 'always' for this run (OS default) Environment Variables Notes --------------------------- Environment variables set by runcpu before the start of the run: GOMP_CPU_AFFINITY = "0-63" LD_LIBRARY_PATH = "/cpu2017/amd_speed_aocc200_rome_C_lib/64;/cpu2017/amd_speed_aocc200_rom e_C_lib/32:" MALLOC_CONF = "retain:true" OMP_DYNAMIC = "false" OMP_SCHEDULE = "static" OMP_STACKSIZE = "128M" OMP_THREAD_LIMIT = "64" Environment variables set by runcpu during the 607.cactuBSSN_s peak run: GOMP_CPU_AFFINITY = "0-63" Environment variables set by runcpu during the 621.wrf_s peak run: GOMP_CPU_AFFINITY = "0-63" Environment variables set by runcpu during the 654.roms_s peak run: GOMP_CPU_AFFINITY = "0-63" General Notes ------------- Binaries were compiled on a system with 2x AMD EPYC 7601 CPU + 512GB Memory using Fedora 26 NA: The test sponsor attests, as of date of publication, that CVE-2017-5754 (Meltdown) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5753 (Spectre variant 1) is mitigated in the system as tested and documented. Yes: The test sponsor attests, as of date of publication, that CVE-2017-5715 (Spectre variant 2) is mitigated in the system as tested and documented. jemalloc: configured and built with GCC v9.1.0 in Ubuntu 19.04 with -O3 -znver2 -flto jemalloc 5.1.0 is available here: https://github.com/jemalloc/jemalloc/releases/download/5.1.0/jemalloc-5.1.0.tar.bz2 Submitted_by: "Bucek, James" Submitted: Tue Sep 17 00:02:18 EDT 2019 Submission: cpu2017-20190903-17798.sub Submitted_by: "Bucek, James" Submitted: Tue Sep 17 09:00:11 EDT 2019 Submission: cpu2017-20190903-17798.sub Platform Notes -------------- BIOS Configuration: AMD SMT Option set to Disabled Thermal Configuration set to Maximum Cooling Determinism Control set to Manual Performance Determinism set to Power Deterministic Memory Patrol Scrubbing set to Disabled NUMA memory domains per socket set to Four memory domains per socket Workload Profile set to General Peak Frequency Compute Minimum Processor Idle Power Core C-State set to C6 State Sysinfo program /cpu2017/bin/sysinfo Rev: r6365 of 2019-08-21 295195f888a3d7edb1e6e46a485a0011 running on dl325gen10 Sat Aug 31 19:41:38 2019 SUT (System Under Test) info as seen by some common utilities. For more information on this section, see https://www.spec.org/cpu2017/Docs/config.html#sysinfo From /proc/cpuinfo model name : AMD EPYC 7702P 64-Core Processor 1 "physical id"s (chips) 64 "processors" cores, siblings (Caution: counting these is hw and system dependent. The following excerpts from /proc/cpuinfo might not be reliable. Use with caution.) cpu cores : 64 siblings : 64 physical 0: cores 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 From lscpu: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian Address sizes: 48 bits physical, 48 bits virtual CPU(s): 64 On-line CPU(s) list: 0-63 Thread(s) per core: 1 Core(s) per socket: 64 Socket(s): 1 NUMA node(s): 4 Vendor ID: AuthenticAMD CPU family: 23 Model: 49 Model name: AMD EPYC 7702P 64-Core Processor Stepping: 0 CPU MHz: 2000.000 CPU max MHz: 2000.0000 CPU min MHz: 1500.0000 BogoMIPS: 3992.33 Virtualization: AMD-V L1d cache: 32K L1i cache: 32K L2 cache: 512K L3 cache: 16384K NUMA node0 CPU(s): 0-15 NUMA node1 CPU(s): 16-31 NUMA node2 CPU(s): 32-47 NUMA node3 CPU(s): 48-63 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl xtopology nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt tce topoext perfctr_core perfctr_nb bpext perfctr_l2 mwaitx cpb cat_l3 cdp_l3 hw_pstate ssbd ibrs ibpb stibp vmmcall fsgsbase bmi1 avx2 smep bmi2 cqm rdt_a rdseed adx smap clflushopt clwb sha_ni xsaveopt xsavec xgetbv1 xsaves cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local clzero irperf xsaveerptr arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif umip rdpid overflow_recov succor smca /proc/cpuinfo cache data cache size : 512 KB From numactl --hardware WARNING: a numactl 'node' might or might not correspond to a physical chip. available: 4 nodes (0-3) node 0 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 node 0 size: 64290 MB node 0 free: 64154 MB node 1 cpus: 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 64507 MB node 1 free: 64367 MB node 2 cpus: 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 node 2 size: 64507 MB node 2 free: 64211 MB node 3 cpus: 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 node 3 size: 64465 MB node 3 free: 64330 MB node distances: node 0 1 2 3 0: 10 12 12 12 1: 12 10 12 12 2: 12 12 10 12 3: 12 12 12 10 From /proc/meminfo MemTotal: 263958144 kB HugePages_Total: 0 Hugepagesize: 2048 kB From /etc/*release* /etc/*version* os-release: NAME="SLES" VERSION="15-SP1" VERSION_ID="15.1" PRETTY_NAME="SUSE Linux Enterprise Server 15 SP1" ID="sles" ID_LIKE="suse" ANSI_COLOR="0;32" CPE_NAME="cpe:/o:suse:sles:15:sp1" uname -a: Linux dl325gen10 4.12.14-195-default #1 SMP Tue May 7 10:55:11 UTC 2019 (8fba516) x86_64 x86_64 x86_64 GNU/Linux Kernel self-reported vulnerability status: CVE-2018-3620 (L1 Terminal Fault): Not affected Microarchitectural Data Sampling: Not affected CVE-2017-5754 (Meltdown): Not affected CVE-2018-3639 (Speculative Store Bypass): Mitigation: Speculative Store Bypass disabled via prctl and seccomp CVE-2017-5753 (Spectre variant 1): Mitigation: __user pointer sanitization CVE-2017-5715 (Spectre variant 2): Mitigation: Full AMD retpoline, IBPB: conditional, IBRS_FW, STIBP: disabled, RSB filling run-level 3 Aug 31 13:56 SPEC is set to: /cpu2017 Filesystem Type Size Used Avail Use% Mounted on /dev/sda2 btrfs 40G 11G 29G 28% / From /sys/devices/virtual/dmi/id BIOS: HPE A41 07/20/2019 Vendor: HPE Product: ProLiant DL325 Gen10 Product Family: ProLiant Serial: CN781302PS Additional information from dmidecode follows. WARNING: Use caution when you interpret this section. The 'dmidecode' program reads system data which is "intended to allow hardware to be accurately determined", but the intent may not be met, as there are frequent changes to hardware, firmware, and the "DMTF SMBIOS" standard. Memory: 8x UNKNOWN NOT AVAILABLE 8x UNKNOWN NOT AVAILABLE 32 GB 2 rank 2933 (End of data from sysinfo program) Power Settings Notes -------------------- PTDaemon to measure power and temperature was run on a ProLiant DL360 Gen9 as a controller with 2x Intel Xeon E5-2660 v3 CPU and 128 GB of memory using Windows Server 2012 R2. Power management in the OS was disabled by setting Linux CPU governor to performance for all cores: cpupower frequency-set -r -g performance Power management in the BIOS was default except for any settings mentioned in BIOS Configuration. No power management settings were set in the management firmware. The optional optical drive was not installed. The system was configured with 7 HPE Small Form Factor Hard Drive Blanks (666987-B21), 8 DIMM blanks 2 high performance heatsinks and baffles that fit over the high performance heatsinks in order to produce correct airflow and cooling. The run was started and observed through the management firmware. The Embedded SATA controller was the HPE Smart Array S100i SR Gen10 SW RAID. Compiler Version Notes ---------------------- ============================================================================== C | 619.lbm_s(base, peak) 638.imagick_s(base, peak) | 644.nab_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------ ============================================================================== C++, C, Fortran | 607.cactuBSSN_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------ ============================================================================== Fortran | 603.bwaves_s(base, peak) 649.fotonik3d_s(base, peak) | 654.roms_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------ ============================================================================== Fortran, C | 621.wrf_s(base, peak) 627.cam4_s(base, peak) | 628.pop2_s(base, peak) ------------------------------------------------------------------------------ AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin AOCC.LLVM.2.0.0.B191.2019_07_19 clang version 8.0.0 (CLANG: Jenkins AOCC_2_0_0-Build#191) (based on LLVM AOCC.LLVM.2.0.0.B191.2019_07_19) Target: x86_64-unknown-linux-gnu Thread model: posix InstalledDir: /sppo/dev/compilers/aocc-compiler-2.0.0/bin ------------------------------------------------------------------------------ Base Compiler Invocation ------------------------ C benchmarks: clang Fortran benchmarks: flang Benchmarks using both Fortran and C: flang clang Benchmarks using Fortran, C, and C++: clang++ clang flang Base Portability Flags ---------------------- 603.bwaves_s: -DSPEC_LP64 607.cactuBSSN_s: -DSPEC_LP64 619.lbm_s: -DSPEC_LP64 621.wrf_s: -DSPEC_CASE_FLAG -Mbyteswapio -DSPEC_LP64 627.cam4_s: -DSPEC_CASE_FLAG -DSPEC_LP64 628.pop2_s: -DSPEC_CASE_FLAG -Mbyteswapio -DSPEC_LP64 638.imagick_s: -DSPEC_LP64 644.nab_s: -DSPEC_LP64 649.fotonik3d_s: -DSPEC_LP64 654.roms_s: -DSPEC_LP64 Base Optimization Flags ----------------------- C benchmarks: -flto -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-vector-library=LIBMVEC -Wl,-mllvm -Wl,-reduce-array-computations=3 -O3 -ffast-math -march=znver2 -fstruct-layout=3 -mllvm -unroll-threshold=50 -fremap-arrays -mllvm -function-specialize -mllvm -enable-gvn-hoist -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp -mllvm -vector-library=LIBMVEC -mllvm -inline-threshold=1000 -flv-function-specialization -z muldefs -DSPEC_OPENMP -fopenmp -DUSE_OPENMP -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang Fortran benchmarks: -flto -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-vector-library=LIBMVEC -Wl,-mllvm -Wl,-reduce-array-computations=3 -O3 -march=znver2 -funroll-loops -Mrecursive -mllvm -vector-library=LIBMVEC -z muldefs -Kieee -fno-finite-math-only -DSPEC_OPENMP -fopenmp -DUSE_OPENMP -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang Benchmarks using both Fortran and C: -flto -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-vector-library=LIBMVEC -Wl,-mllvm -Wl,-reduce-array-computations=3 -O3 -ffast-math -march=znver2 -fstruct-layout=3 -mllvm -unroll-threshold=50 -fremap-arrays -mllvm -function-specialize -mllvm -enable-gvn-hoist -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp -mllvm -vector-library=LIBMVEC -mllvm -inline-threshold=1000 -flv-function-specialization -funroll-loops -Mrecursive -z muldefs -Kieee -fno-finite-math-only -DSPEC_OPENMP -fopenmp -DUSE_OPENMP -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang Benchmarks using Fortran, C, and C++: -std=c++98 -flto -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-vector-library=LIBMVEC -Wl,-mllvm -Wl,-reduce-array-computations=3 -Wl,-mllvm -Wl,-suppress-fmas -O3 -ffast-math -march=znver2 -fstruct-layout=3 -mllvm -unroll-threshold=50 -fremap-arrays -mllvm -function-specialize -mllvm -enable-gvn-hoist -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp -mllvm -vector-library=LIBMVEC -mllvm -inline-threshold=1000 -flv-function-specialization -mllvm -loop-unswitch-threshold=200000 -mllvm -unroll-threshold=100 -mllvm -enable-partial-unswitch -funroll-loops -Mrecursive -z muldefs -Kieee -fno-finite-math-only -DSPEC_OPENMP -fopenmp -DUSE_OPENMP -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang Base Other Flags ---------------- C benchmarks: -Wno-return-type Fortran benchmarks: -Wno-return-type Benchmarks using both Fortran and C: -Wno-return-type Benchmarks using Fortran, C, and C++: -Wno-return-type Peak Compiler Invocation ------------------------ C benchmarks: clang Fortran benchmarks: flang Benchmarks using both Fortran and C: flang clang Benchmarks using Fortran, C, and C++: clang++ clang flang Peak Portability Flags ---------------------- Same as Base Portability Flags Peak Optimization Flags ----------------------- C benchmarks: 619.lbm_s: basepeak = yes 638.imagick_s: basepeak = yes 644.nab_s: basepeak = yes Fortran benchmarks: 603.bwaves_s: basepeak = yes 649.fotonik3d_s: basepeak = yes 654.roms_s: -flto -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-vector-library=LIBMVEC -Wl,-mllvm -Wl,-reduce-array-computations=3 -Wl,-mllvm -Wl,-enable-X86-prefetching -O3 -march=znver2 -funroll-loops -Mrecursive -mllvm -vector-library=LIBMVEC -Kieee -fno-finite-math-only -DSPEC_OPENMP -fopenmp -DUSE_OPENMP -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang Benchmarks using both Fortran and C: 621.wrf_s: -flto -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-vector-library=LIBMVEC -Wl,-mllvm -Wl,-reduce-array-computations=3 -Ofast -march=znver2 -mno-sse4a -fstruct-layout=5 -mllvm -vectorize-memory-aggressively -mllvm -function-specialize -mllvm -enable-gvn-hoist -mllvm -unroll-threshold=50 -fremap-arrays -mllvm -vector-library=LIBMVEC -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp -mllvm -inline-threshold=1000 -flv-function-specialization -O3 -funroll-loops -Mrecursive -Kieee -fno-finite-math-only -DSPEC_OPENMP -fopenmp -DUSE_OPENMP -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang 627.cam4_s: basepeak = yes 628.pop2_s: basepeak = yes Benchmarks using Fortran, C, and C++: -std=c++98 -flto -Wl,-mllvm -Wl,-function-specialize -Wl,-mllvm -Wl,-region-vectorize -Wl,-mllvm -Wl,-vector-library=LIBMVEC -Wl,-mllvm -Wl,-reduce-array-computations=3 -Ofast -march=znver2 -mno-sse4a -fstruct-layout=5 -mllvm -vectorize-memory-aggressively -mllvm -function-specialize -mllvm -enable-gvn-hoist -mllvm -unroll-threshold=50 -fremap-arrays -mllvm -vector-library=LIBMVEC -mllvm -reduce-array-computations=3 -mllvm -global-vectorize-slp -mllvm -inline-threshold=1000 -flv-function-specialization -mllvm -unroll-threshold=100 -mllvm -enable-partial-unswitch -mllvm -loop-unswitch-threshold=200000 -O3 -funroll-loops -Mrecursive -Kieee -fno-finite-math-only -DSPEC_OPENMP -fopenmp -DUSE_OPENMP -fopenmp=libomp -lomp -lpthread -ldl -lmvec -lamdlibm -ljemalloc -lflang Peak Other Flags ---------------- C benchmarks: -Wno-return-type Fortran benchmarks: -Wno-return-type Benchmarks using both Fortran and C: -Wno-return-type Benchmarks using Fortran, C, and C++: -Wno-return-type The flags files that were used to format this result can be browsed at http://www.spec.org/cpu2017/flags/aocc200-flags-C1-HPE.html http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revF.html You can also download the XML flags sources by saving the following links: http://www.spec.org/cpu2017/flags/aocc200-flags-C1-HPE.xml http://www.spec.org/cpu2017/flags/HPE-Platform-Flags-AMD-V1.2-EPYC-revF.xml PTDaemon, SPEC CPU, and SPECspeed are trademarks or registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. ---------------------------------------------------------------------------------------------------------------------------------- For questions about this result, please contact the tester. For other inquiries, please contact info@spec.org. Copyright 2017-2019 Standard Performance Evaluation Corporation Tested with SPEC CPU(R)2017 v1.1.0 on 2019-08-31 20:41:37-0400. Report generated on 2019-09-17 16:19:29 by CPU2017 text formatter v6255. Originally published on 2019-09-17.