# Invocation command line:
# /root/cpu2006-1.2/bin/runspec --define default-platform-flags --rate --copies 256 -c cpu2006-1.2-ic16.0u2-lin64-dt-mic-avx512-rate-20160518.cfg --define smt-on --define cores=256 --define physicalfirst --define invoke_with_interleave --define drop_caches --tune base,peak -o all fp
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 16.0u2
#      Operating system version:    64-Bit RedHat Enterprise Linux64 7.2
#      Hardware:                    Intel processors supporting MIC-AVX512
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# 20160518 Intel Compiler 16.0u2 for Linux64
############################################################################
action      = validate
tune        = base,peak

     #
     ########################################################
     #         ATTENTION     ATTENTION     ATTENTION
     ########################################################
     #
     #     NOTE If you change fail_build then PLEASE also
     #     change the line 'define version', because
     #     SPEC review tools use 'ext' to track binaries.
     #
     ########################################################
%define version 20160518
     ext         = cpu2006-1.2-ic16.0u2-lin64-dt-mic-avx512-rate-%{version}
     #
     # vvvvvvvvvvvv # do not change unless you read NOTE above
       fail_build=1 # do not change unless you read NOTE above
     # ^^^^^^^^^^^^ # do not change unless you read NOTE above
     #
     ########################################################
     #

PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1
sysinfo_program = specperl $[top]/config/sysinfo.rev6914

flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64-revB.xml
%ifdef %{default-platform-flags}
flagsurl001=http://www.spec.org/cpu2006/flags/Default-Platform-Flags.xml
%endif

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin
CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin
OBJ = .o
SMARTHEAP32_DIR = /sh
SMARTHEAP64_DIR = /sh
PORTABILITY = -D_FILE_OFFSET_BITS=64

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

default:
SSE          = -xMIC-AVX512
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST         =  $(SSE) -ipo -O3 -no-prec-div

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC)  -opt-prefetch
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch

fp=base=default=default:
OPTIMIZE=     $(FAST) -opt-prefetch
COPTIMIZE=    -auto-p32 -ansi-alias
CXXOPTIMIZE=  -auto-p32 -ansi-alias

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias
CXXOPTIMIZE=       -ansi-alias
PASS1_CFLAGS     = $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE= -auto-ilp32

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias

403.gcc=peak=default:
COPTIMIZE = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen -par-num-threads=1
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen -par-num-threads=1
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FASTNOSTATIC) -unroll2  -auto-ilp32
feedback=no

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
COPTIMIZE=  -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_CFLAGS =   $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS = $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_CXXFLAGS = $(FASTNOSTATIC) -prof-use
PASS1_FFLAGS =   $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_FFLAGS =   $(FASTNOSTATIC)                         -prof-use
PASS1_LDFLAGS =  $(FASTNOSTATIC) -prof-gen -par-num-threads=1
PASS2_LDFLAGS =  $(FASTNOSTATIC)                         -prof-use

410.bwaves=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 4 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep-

433.milc=peak=default:
basepeak=yes
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 4 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch

436.cactusADM=peak=default:
basepeak=yes
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 4 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

437.leslie3d=peak=default:
basepeak=yes

####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 4 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
PORTABILITY = -D_FILE_OFFSET_BITS=64
CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 4 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
basepeak=yes
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 4 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 4 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
basepeak=yes

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 55
test_sponsor     = Dell Inc.
hw_avail         = Jan-2017
sw_avail         = Jan-2017
tester           = Dell Inc.
hw_cpu_name      = Intel Trademarked CPU Name
hw_cpu_char      =Intel Turbo Boost Technology up to 1.50 GHz
hw_cpu_mhz       = 1300
hw_disk          = 9999 GB SATA, 9999RPM
hw_fpu           = Integrated
hw_memory000     = 400 GB (6 x 64 GB 2Rx8 PC4-2400T-R, running at
hw_model         = PowerEdge C6320p (Intel Xeon Phi 7210 1.30 GHz)
hw_ncpuorder     = 1 chip
hw_ncores        = 64
hw_nchips        = 9999
hw_ncoresperchip = 64
hw_nthreadspercore = 4
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 1 MB I+D on chip per two cores
hw_tcache        = None
hw_ocache        = None
hw_vendor        = Dell Inc.
prepared_by      = <Insert Entity Name>
sw_file          = xfs
sw_os001         = RedHat EL 7.2
sw_state         = Run level 3 (multi-user)
notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor.
notes_submit_010 = For details, please see the config file.
%ifdef %{no-numa}
notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor.
notes_submit_002 = For details, please see the config file.
%endif
notes_015        = Binaries compiled on a system with
notes_020        = Intel 2nd Generation Xeon Phi CPU
notes_025        = with 96 GB DDR4 memory using RedHat EL 7.2
notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"

int=default=default=default:
sw_compiler001   = C/C++: Version 16.0.2.181 of Intel C++ Studio XE
sw_compiler002   = for Linux
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other001      = Microquill SmartHeap V10.2

default:
%ifdef %{THP_enabled}
notes_200        = Transparent Huge Pages enabled with:
notes_201        = echo always > /sys/kernel/mm/transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_200        = Transparent Huge Pages disabled with:
notes_201        = echo never  > /sys/kernel/mm/transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_030        = Filesystem page cache cleared with:
notes_035        = echo 1>       /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_040        = runspec command invoked through numactl i.e.:
notes_045        = numactl --interleave=all runspec <etc>
%endif

fp=default=default=default:
sw_compiler000   = C/C++: Version 16.0.2.181 of Intel C++ Studio XE
sw_compiler001   = for Linux;
sw_compiler002   = Fortran: Version 16.0.2.181 of Intel Fortran
sw_compiler003   = Studio XE for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other = None


# The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914'
default:
notes_plat_sysinfo_000 = Sysinfo program /root/cpu2006-1.2/config/sysinfo.rev6914
notes_plat_sysinfo_005 = $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1
notes_plat_sysinfo_010 = running on linux-z6tq Thu Mar  9 22:03:14 2017
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon Phi(TM) CPU 7210 @ 1.30GHz
notes_plat_sysinfo_050 =       1 "physical id"s (chips)
notes_plat_sysinfo_055 =       256 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 64
notes_plat_sysinfo_080 =       siblings  : 256
notes_plat_sysinfo_085 =       physical 0: cores 0 1 10 11 12 13 14 15 18 19 20 21 22 23 24 25 28 29 30
notes_plat_sysinfo_090 =       31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 48 49 50 51 52 53 54 55 56 57
notes_plat_sysinfo_095 =       58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73
notes_plat_sysinfo_100 =    cache size : 1024 KB
notes_plat_sysinfo_105 =
notes_plat_sysinfo_110 = From /proc/meminfo
notes_plat_sysinfo_115 =    MemTotal:       396136364 kB
notes_plat_sysinfo_120 =    HugePages_Total:       0
notes_plat_sysinfo_125 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_130 =
notes_plat_sysinfo_135 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_140 =    SuSE-release:
notes_plat_sysinfo_145 =       SUSE Linux Enterprise Server 12 (x86_64)
notes_plat_sysinfo_150 =       VERSION = 12
notes_plat_sysinfo_155 =       PATCHLEVEL = 2
notes_plat_sysinfo_160 =       # This file is deprecated and will be removed in a future service pack or
notes_plat_sysinfo_165 =       release.
notes_plat_sysinfo_170 =       # Please check /etc/os-release for details about this release.
notes_plat_sysinfo_175 =    os-release:
notes_plat_sysinfo_180 =       NAME="SLES"
notes_plat_sysinfo_185 =       VERSION="12-SP2"
notes_plat_sysinfo_190 =       VERSION_ID="12.2"
notes_plat_sysinfo_195 =       PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2"
notes_plat_sysinfo_200 =       ID="sles"
notes_plat_sysinfo_205 =       ANSI_COLOR="0;32"
notes_plat_sysinfo_210 =       CPE_NAME="cpe:/o:suse:sles:12:sp2"
notes_plat_sysinfo_215 =
notes_plat_sysinfo_220 = uname -a:
notes_plat_sysinfo_225 =    Linux linux-z6tq 4.4.16-56-default #1 SMP Mon Aug 8 14:24:26 UTC 2016
notes_plat_sysinfo_230 =    (5b281a8) x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_235 =
notes_plat_sysinfo_240 = run-level 3 Mar 6 22:35
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = SPEC is set to: /root/cpu2006-1.2
notes_plat_sysinfo_255 =    Filesystem     Type   Size  Used Avail Use% Mounted on
notes_plat_sysinfo_260 =    /dev/sdb2      btrfs  930G  533G  395G  58% /
notes_plat_sysinfo_265 = Additional information from dmidecode:
notes_plat_sysinfo_270 =
notes_plat_sysinfo_275 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_280 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_285 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_290 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_295 =
notes_plat_sysinfo_300 =   BIOS Dell Inc. 1.1.7 003/003/2017
notes_plat_sysinfo_305 =   Memory:
notes_plat_sysinfo_310 =    6x Hynix HMAA8GL7MMR4N-UH 64 GB 4 rank 2400 MHz, configured at 2133 MHz
notes_plat_sysinfo_315 =    8x INTEL N/A 2 GB 6400 MHz
notes_plat_sysinfo_320 =
notes_plat_sysinfo_325 = (End of data from sysinfo program)
hw_cpu_name    = Intel Xeon Phi 7210
hw_disk        = 1 x 1 TB 7.2K  SATA
hw_memory001   = 2133 MHz + 8 x 2 GB 6400 MHz MCDRAM)
hw_nchips      = 1
prepared_by    = root  (is never output, only tags rawfile)
sw_file        = xfs
sw_os000       = SUSE Linux Enterprise Server 12 SP2 (x86_64)
sw_os001       = 4.4.16-56-default
sw_state       = Run level 3 (multi-user)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/root/cpu2006-1.2/libs/32:/root/cpu2006-1.2/libs/64:/root/cpu2006-1.2/sh"
notes_010 =