# Invocation command line: # /home/cpu2006/bin/runspec --define default-platform-flags -c cpu2006-1.2-ic17.0-lin-core-avx2-speed-20160922.cfg --define cores=96 --tune base,peak -o all --define intspeed int # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20160922 Intel(R) C/C++ and Fortran 17.0 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160922 ext = cpu2006-1.2-ic17.0-lin-core-avx2-speed-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above # fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/HP-Platform-Flags-Intel-V1.2-HSW-revE.xml flagsurl001 = http://www.spec.org/cpu2006/flags/HPE-Compiler-Flags-Intel-V1.2-HSW-revH.xml %ifdef %{default-platform-flags} %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh10.2 # Set some environment variables preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,compact %else preENV_KMP_AFFINITY = granularity=fine,compact %endif int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = $[top]/sh10.2 SMARTHEAP64_DIR = $[top]/sh10.2 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xCORE-AVX2 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div FAST = $(SSE) -ipo -O3 -no-prec-div -static ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST) -parallel -qopt-prefetch -auto-ilp32 -complex-limited-range -qopt-prefetch-issue-excl-hint -ansi-alias CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST) -parallel -qopt-prefetch -fp-model fast=2 COPTIMIZE= $(FAST) -parallel -qopt-prefetch -ansi-alias -fp-model fast=2 CXXOPTIMIZE= $(FAST) -qopt-prefetch -ansi-alias -fp-model fast=2 ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -qopt-prefetch -ansi-alias 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -qopt-prefetch -no-prec-div -ansi-alias 403.gcc=peak=default: #feedback=0 CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto-ilp32 -static OPTIMIZE= $(FAST_NO_STATIC) feedback=0 429.mcf=peak=default: #feedback=0 CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= -parallel -qopt-prefetch -auto-p32 -complex-limited-range -static OPTIMIZE= $(FAST_NO_STATIC) feedback=0 submit = taskset -c $SPECCOPYNUM $command 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= -ansi-alias PASS1_CFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CFLAGS = $(SSE) -prof-use PASS1_LDCFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDCFLAGS = $(SSE) -prof-use 456.hmmer=peak=default: #basepeak=yes COPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch -funroll-all-loops feedback=0 submit = taskset -c $SPECCOPYNUM $command 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-ra-region-strategy=block -ansi-alias 473.astar=peak=default: #feedback=0 CXXOPTIMIZE= -qopt-prefetch -auto-p32 OPTIMIZE= $(FAST_NO_STATIC) feedback=0 submit = taskset -c $SPECCOPYNUM $command 483.xalancbmk=peak=default: feedback=0 CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-prefetch -ansi-alias OPTIMIZE= $(FAST_NO_STATIC) feedback=no ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 -ansi-alias CXXOPTIMIZE= -auto-ilp32 -ansi-alias PASS1_CFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_FFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDFLAGS = -prof-gen=threadsafe -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST_NO_STATIC) 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -qopt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 3 test_sponsor = HPE hw_avail = Mar-2017 sw_avail = Nov-2016 tester = HPE hw_cpu_name = Intel Trademarked CPU Name hw_cpu_char = Intel Turbo Boost Technology up to 3.40 GHz hw_cpu_mhz = 2400 hw_disk = 9999 GB SATA, 9999RPM hw_fpu = Integrated hw_memory000 = 1 TB (32 x 32 GB 2Rx4 PC4-2400T-R, hw_model000 = Synergy 680 Gen9 hw_model001 = (2.40 GHz, Intel Xeon E7-8894 v4) hw_ncpuorder = 2,4 chip hw_ncores = 96 hw_nchips = 9999 hw_ncoresperchip = 24 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 60 MB I+D on chip per chip hw_ocache = None hw_vendor = Hewlett Packard Enterprise prepared_by = Insert Entity Name sw_file = xfs sw_os001 = Redhat Enterprise Linux 7.2 sw_state = Run level 3 (multi-user) notes_025 = Binaries compiled on a system with 1x Intel Core i7-4790K CPU + 32GB RAM notes_030 = memory using Redhat Enterprise Linux 7.2 notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_os_005 = Transparent Huge Pages enabled by default. int=default=default=default: sw_compiler000 = C/C++: Version 17.0.0.098 of Intel C++ Studio XE sw_compiler001 = for Linux sw_base_ptrsize = 32-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_200 = Transparent Huge Pages enabled with: notes_201 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler002 = Compiler for Linux; sw_compiler004 = Fortran: Version 17.0.0.098 of Intel Fortran sw_compiler005 = Compiler for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993' default: notes_plat_sysinfo_000 = Sysinfo program /home/cpu2006/config/sysinfo.rev6993 notes_plat_sysinfo_005 = Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) notes_plat_sysinfo_010 = running on synergy680_manju Tue Jan 24 11:16:48 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E7-8894 v4 @ 2.40GHz notes_plat_sysinfo_050 = 4 "physical id"s (chips) notes_plat_sysinfo_055 = 96 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 24 notes_plat_sysinfo_080 = siblings : 24 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_090 = 27 28 29 notes_plat_sysinfo_095 = physical 1: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_100 = 27 28 29 notes_plat_sysinfo_105 = physical 2: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_110 = 27 28 29 notes_plat_sysinfo_115 = physical 3: cores 0 1 2 3 4 5 8 9 10 11 12 13 16 17 18 19 20 21 24 25 26 notes_plat_sysinfo_120 = 27 28 29 notes_plat_sysinfo_125 = cache size : 61440 KB notes_plat_sysinfo_130 = notes_plat_sysinfo_135 = From /proc/meminfo notes_plat_sysinfo_140 = MemTotal: 1056744324 kB notes_plat_sysinfo_145 = HugePages_Total: 0 notes_plat_sysinfo_150 = Hugepagesize: 2048 kB notes_plat_sysinfo_155 = notes_plat_sysinfo_160 = From /etc/*release* /etc/*version* notes_plat_sysinfo_165 = SuSE-release: notes_plat_sysinfo_170 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_175 = VERSION = 12 notes_plat_sysinfo_180 = PATCHLEVEL = 2 notes_plat_sysinfo_185 = # This file is deprecated and will be removed in a future service pack or notes_plat_sysinfo_190 = release. notes_plat_sysinfo_195 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_200 = os-release: notes_plat_sysinfo_205 = NAME="SLES" notes_plat_sysinfo_210 = VERSION="12-SP2" notes_plat_sysinfo_215 = VERSION_ID="12.2" notes_plat_sysinfo_220 = PRETTY_NAME="SUSE Linux Enterprise Server 12 SP2" notes_plat_sysinfo_225 = ID="sles" notes_plat_sysinfo_230 = ANSI_COLOR="0;32" notes_plat_sysinfo_235 = CPE_NAME="cpe:/o:suse:sles:12:sp2" notes_plat_sysinfo_240 = notes_plat_sysinfo_245 = uname -a: notes_plat_sysinfo_250 = Linux synergy680_manju 4.4.21-69-default #1 SMP Tue Oct 25 10:58:20 UTC 2016 notes_plat_sysinfo_255 = (9464f67) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_260 = notes_plat_sysinfo_265 = run-level 3 Jan 24 11:14 notes_plat_sysinfo_270 = notes_plat_sysinfo_275 = SPEC is set to: /home/cpu2006 notes_plat_sysinfo_280 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_285 = /dev/sda4 xfs 331G 20G 312G 6% /home notes_plat_sysinfo_290 = Additional information from dmidecode: notes_plat_sysinfo_295 = notes_plat_sysinfo_300 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_305 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_310 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_315 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_320 = notes_plat_sysinfo_325 = BIOS HP I40 12/08/2016 notes_plat_sysinfo_330 = Memory: notes_plat_sysinfo_335 = 64x UNKNOWN NOT AVAILABLE notes_plat_sysinfo_340 = 32x UNKNOWN NOT AVAILABLE 32 GB 2 rank 2400 MHz, configured at 1600 MHz notes_plat_sysinfo_345 = notes_plat_sysinfo_350 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E7-8894 v4 hw_disk = 1 x 400 GB SAS SSD, RAID 0 hw_memory001 = running at 1600 MHz) hw_nchips = 4 prepared_by = HPE Performance Engineering sw_file = xfs sw_os000 = SUSE Linux Enterprise Server 12 (x86_64) SP2, sw_os001 = Kernel 4.4.21-69-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. 445.gobmk: # The following setting was inserted automatically as a result of # post-run basepeak application. basepeak = 1 default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,compact" notes_010 =LD_LIBRARY_PATH = "/home/cpu2006/libs/32:/home/cpu2006/libs/64:/home/cpu2006/sh10.2" notes_015 =OMP_NUM_THREADS = "96" notes_020 = notes_plat_000 = BIOS Configuration: notes_plat_005 = HP Power Profile set to Custom notes_plat_010 = HP Power Regulator to HP Static High Performance Mode notes_plat_015 = Minimum Processor Idle Power Core C-State set to C6 State notes_plat_020 = Minimum Processor Idle Power Package C-State set to No Package State notes_plat_025 = QPI Snoop Configuration set to Home Snoop notes_plat_030 = Collaborative Power Control set to Disabled notes_plat_035 = Thermal Configuration set to Maximum Cooling notes_plat_040 = Processor Power and Utilization Monitoring set to Disabled notes_plat_045 = Intel Hyper Threading set to Disabled notes_plat_050 = Memory Refresh Rate set to 1x Refresh notes_plat_update_000 = Regarding the sysinfo display about the memory installed, the correct amount of notes_plat_update_005 = memory is 1 TB and the dmidecode description should have one line reading as: notes_plat_update_010 = 32x UNKNOWN NOT AVAILABLE 32 GB 2 rank 2400 MHz, configured at 1600 MHz