# Invocation command line: # /root/previous-cpu2006-1.2/bin/runspec --define external --define THP_enabled -c cpu2006-1.2-ic17.0-lin-core-avx2-speed-20160922.cfg --define cores=28 --tune base,peak -o all --define intspeed int # output_root was not used for this run ############################################################################ ############################################################################ # SPEC CPU2006 precompiled subbenchmark config file # 20160922 Intel(R) C/C++ and Fortran 17.0 Compilers for Linux ############################################################################ ############################################################################ # This is config file targets: # # Compiler name/version: Intel(R) C/C++ and Fortran 17.0 Compilers for Linux # Operating system version: Redhat Enterprise Linux 7.2, GLIBC 2.17 # Hardware: Intel(R) processors supporting CORE-AVX2 tuning # ############################################################################ # ######################################################## # ATTENTION ATTENTION ATTENTION ######################################################## # # NOTE If you change fail_build then PLEASE also # change the line 'define version', because # SPEC review tools use 'ext' to track binaries. # ######################################################## %define version 20160922 ext = cpu2006-1.2-ic17.0-lin-core-avx2-speed-%{version} # # vvvvvvvvvvvv # do not change unless you read NOTE above fail_build=1 # do not change unless you read NOTE above # ^^^^^^^^^^^^ # do not change unless you read NOTE above # ######################################################## # action = validate tune = base,peak PATHSEP = / makeflags= -j8 check_md5=1 reportable=1 bench_post_setup=sync parallel_test=0 mean_anyway=1 sysinfo_program = specperl $[top]/config/sysinfo.rev6993 use_submit_for_speed=1 flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic17.0-official-linux64.xml %ifdef %{external} flagsurl001=http://www.spec.org/cpu2006/flags/Dell-Platform-Flags-PowerEdge13G-revE.xml %endif # Set some environment variables preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh10.2 # Set some environment variables preENV_OMP_NUM_THREADS = %{cores} %ifdef %{intspeed} preENV_KMP_AFFINITY = granularity=fine,scatter %else #preENV_KMP_AFFINITY = granularity=fine,compact,1,0 preENV_KMP_AFFINITY = granularity=fine,compact %endif int=default=default=default: CC= icc -m64 CXX= icpc -m64 OBJ = .o SMARTHEAP32_DIR = /sh10.2 SMARTHEAP64_DIR = /sh10.2 fp=default=default=default: CC= icc -m64 CXX= icpc -m64 FC= ifort -m64 OBJ = .o #################################################################### # Compiler Global Tuning Options #################################################################### default: SSE = -xCORE-AVX2 FAST_NO_STATIC = $(SSE) -ipo -O3 -no-prec-div ################################################################ # # portability & libraries # #################### Portability Flags and Notes ############################ default: PORTABILITY = -DSPEC_CPU_LP64 400.perlbench=default: CPORTABILITY = -DSPEC_CPU_LINUX_X64 403.gcc=default: EXTRA_CFLAGS= -Dalloca=_alloca 462.libquantum=default: CPORTABILITY= -DSPEC_CPU_LINUX 483.xalancbmk=default=default=default: CXXPORTABILITY= -DSPEC_CPU_LINUX 435.gromacs=default=default=default: LDPORTABILITY = -nofor_main 436.cactusADM=default=default=default: LDPORTABILITY = -nofor_main 454.calculix=default=default=default: LDPORTABILITY = -nofor_main 481.wrf=default=default=default: CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX 471.omnetpp,473.astar,483.xalancbmk=default: EXTRA_LIBS= -L$(SMARTHEAP64_DIR) -lsmartheap64 EXTRA_LDFLAGS= -Wl,-z,muldefs int=base=default=default: COPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch -auto-p32 CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch -auto-p32 fp=base=default=default: FOPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch COPTIMIZE= $(FAST_NO_STATIC) -parallel -qopt-prefetch CXXOPTIMIZE= $(FAST_NO_STATIC) -qopt-prefetch ################################################################ # Peak Tuning Flags int 2006 fast ################################################################ int=peak=default: COPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDCXXFLAGS = -prof-gen -par-num-threads=1 PASS2_LDCXXFLAGS = -prof-use $(FAST_NO_STATIC) 400.perlbench,401.bzip2,429.mcf,445.gobmk,458.sjeng,464.h264ref,471.omnetpp,473.astar,483.xalancbmk=peak: submit = taskset -c $SPECCOPYNUM $command 400.perlbench=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 CPORTABILITY = -DSPEC_CPU_LINUX_IA32 COPTIMIZE= -qopt-prefetch 401.bzip2=peak=default: COPTIMIZE= -auto-ilp32 -qopt-prefetch -no-prec-div 403.gcc=peak=default: feedback=0 COPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto-ilp32 OPTIMIZE= $(FAST_NO_STATIC) 429.mcf=peak=default: feedback=0 COPTIMIZE= -parallel -qopt-prefetch -auto-p32 OPTIMIZE= $(FAST_NO_STATIC) 445.gobmk=peak=default: CC= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 PORTABILITY= -D_FILE_OFFSET_BITS=64 COPTIMIZE= 456.hmmer=peak=default: basepeak=yes 458.sjeng=peak=default: COPTIMIZE= -unroll4 462.libquantum=peak=default: basepeak=yes 464.h264ref=peak=default: basepeak=yes 471.omnetpp=peak=default: CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-ra-region-strategy=block 473.astar=peak=default: feedback=0 CXXOPTIMIZE= -qopt-prefetch -auto-p32 OPTIMIZE= $(FAST_NO_STATIC) 483.xalancbmk=peak=default: feedback=0 CXX= icc -m32 -L/opt/intel/compilers_and_libraries_2017/linux/lib/ia32 EXTRA_LIBS= -L$(SMARTHEAP32_DIR) -lsmartheap PORTABILITY= -D_FILE_OFFSET_BITS=64 CXXOPTIMIZE= -qopt-prefetch OPTIMIZE= $(FAST_NO_STATIC) ################################################################ # Peak Tuning Flags for FP ################################################################ fp=peak=default: COPTIMIZE= -auto-ilp32 CXXOPTIMIZE= -auto-ilp32 PASS1_CFLAGS = -prof-gen -par-num-threads=1 PASS2_CFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_CXXFLAGS = -prof-gen -par-num-threads=1 PASS2_CXXFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_FFLAGS = -prof-gen -par-num-threads=1 PASS2_FFLAGS = -prof-use $(FAST_NO_STATIC) PASS1_LDFLAGS = -prof-gen -par-num-threads=1 PASS2_LDFLAGS = -prof-use $(FAST_NO_STATIC) 410.bwaves=peak=default: basepeak=yes 416.gamess=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -scalar-rep- 433.milc=peak=default: basepeak=yes 434.zeusmp=peak=default: basepeak=yes 435.gromacs=peak=default: basepeak=yes 436.cactusADM=peak=default: basepeak=yes 437.leslie3d=peak=default: basepeak=yes 444.namd=peak=default: OPTIMIZE= -fno-alias CXXOPTIMIZE= -fno-alias -auto-ilp32 447.dealII=peak=default: basepeak=yes 450.soplex=peak=default: basepeak=yes 453.povray=peak=default: CXXOPTIMIZE= -unroll4 -ansi-alias 454.calculix=peak=default: feedback=0 OPTIMIZE= $(FAST_NO_STATIC) 459.GemsFDTD=peak=default: OPTIMIZE= -unroll2 -inline-level=0 -qopt-prefetch -parallel 465.tonto=peak=default: OPTIMIZE= -inline-calloc -qopt-malloc-options=3 -auto -unroll4 470.lbm=peak=default: basepeak=yes 481.wrf=peak=default: basepeak=yes 482.sphinx3=peak=default: basepeak=yes ################################################################# # (Edit this to match your system) ################################################################# default=default=default=default: license_num = 55 test_sponsor = Dell Inc. hw_avail = Mar-2016 sw_avail = Nov-2016 tester = Dell Inc. hw_cpu_name = Intel(R) Xeon(R) CPU E5-2680 v4 hw_cpu_char = Intel Turbo Boost Technology up to 3.30 GHz hw_cpu_mhz = 3000 hw_disk = 2 x 2000 GB SATA 7200 RPM hw_fpu = Integrated hw_memory = 256 GB (16 x 16 GB 2Rx8 PC4-2400T-R) hw_model = PowerEdge R730xd (Intel Xeon E5-2680 v4, 2.40 GHz) hw_ncpuorder = 1,2 chips hw_ncores = 28 hw_nchips = 2 hw_ncoresperchip = 14 hw_nthreadspercore = 1 hw_other = None hw_pcache = 32 KB I + 32 KB D on chip per core hw_scache = 256 KB I+D on chip per core hw_tcache = 35 MB I+D on chip per chip hw_ocache = None hw_vendor = Dell Inc. prepared_by = Dell Inc. sw_file = xfs sw_os001 = SUSE Enterprise Linux Server 12 SP1 (x86_64) Kernel 3.12.28-4-default sw_state = Run level 3 (multi-user) notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor. notes_submit_010 = For details, please see the config file. %ifdef %{no-numa} notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit' notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor. notes_submit_002 = For details, please see the config file. %endif notes_025 = The results have been measured on a Dell PowerEdge R730xd model. notes_030 = Binaries compiled on a system with 1x Intel Core i7-4790K CPU + 32GB RAM notes_os_000 = Stack size set to unlimited using "ulimit -s unlimited" notes_plat_form_000 = BIOS settings: notes_plat_form_005 = Snoop Mode set to Opportunistic Snoop Broadcast notes_plat_form_010 = Virtualization Technology disabled notes_plat_form_015 = System Profile set to Custom notes_plat_form_020 = CPU Performance set to Maximum Performance notes_plat_form_025 = C States set to Autonomous notes_plat_form_030 = C1E disabled notes_plat_form_035 = Energy Efficient Turbo disabled notes_plat_form_040 = Uncore Frequency set to Dynamic notes_plat_form_045 = Energy Efficiency Policy set to Performance notes_plat_form_050 = Memory Patrol Scrub disabled notes_plat_form_055 = Logical Processor disabled int=default=default=default: sw_compiler000 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler001 = Compiler for Linux sw_base_ptrsize = 32/64-bit sw_peak_ptrsize = 32/64-bit sw_other = Microquill SmartHeap V10.2 default: %if defined(%{THP_enabled}) notes_035 = memory using Redhat Enterprise Linux 7.2 notes_040 = Transparent Huge Pages enabled with: notes_045 = echo always > /sys/kernel/mm/transparent_hugepage/enabled %elif defined(%{THP_disabled}) notes_200 = Transparent Huge Pages disabled with: notes_201 = echo never > /sys/kernel/mm/transparent_hugepage/enabled %else notes_200 = Transparent Huge Pages enabled by default. %endif %ifdef %{drop_caches} notes_202 = Filesystem page cache cleared with: notes_203 = echo 1> /proc/sys/vm/drop_caches %endif %ifdef %{invoke_with_interleave} notes_204 = runspec command invoked through numactl i.e.: notes_205 = numactl --interleave=all runspec %endif fp=default=default=default: sw_compiler001 = C/C++: Version 17.0.0.098 of Intel C/C++ sw_compiler002 = Compiler for Linux; sw_compiler004 = Fortran: Version 17.0.0.098 of Intel Fortran sw_compiler005 = Compiler for Linux sw_base_ptrsize = 64-bit sw_peak_ptrsize = 32/64-bit # The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6993' default: notes_plat_sysinfo_000 = Sysinfo program /root/previous-cpu2006-1.2/config/sysinfo.rev6993 notes_plat_sysinfo_005 = Revision 6993 of 2015-11-06 (b5e8d4b4eb51ed28d7f98696cbe290c1) notes_plat_sysinfo_010 = running on linux-0171 Fri Feb 10 16:31:51 2017 notes_plat_sysinfo_015 = notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by notes_plat_sysinfo_025 = some common utilities. To remove or add to this section, see: notes_plat_sysinfo_030 = http://www.spec.org/cpu2006/Docs/config.html#sysinfo notes_plat_sysinfo_035 = notes_plat_sysinfo_040 = From /proc/cpuinfo notes_plat_sysinfo_045 = model name : Intel(R) Xeon(R) CPU E5-2680 v4@ 2.40GHz notes_plat_sysinfo_050 = 2 "physical id"s (chips) notes_plat_sysinfo_055 = 28 "processors" notes_plat_sysinfo_060 = cores, siblings (Caution: counting these is hw and system dependent. The notes_plat_sysinfo_065 = following excerpts from /proc/cpuinfo might not be reliable. Use with notes_plat_sysinfo_070 = caution.) notes_plat_sysinfo_075 = cpu cores : 14 notes_plat_sysinfo_080 = siblings : 14 notes_plat_sysinfo_085 = physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 notes_plat_sysinfo_090 = physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14 notes_plat_sysinfo_095 = cache size : 35840 KB notes_plat_sysinfo_100 = notes_plat_sysinfo_105 = From /proc/meminfo notes_plat_sysinfo_110 = MemTotal: 264567484 kB notes_plat_sysinfo_115 = HugePages_Total: 0 notes_plat_sysinfo_120 = Hugepagesize: 2048 kB notes_plat_sysinfo_125 = notes_plat_sysinfo_130 = /usr/bin/lsb_release -d notes_plat_sysinfo_135 = SUSE Linux Enterprise Server 12 notes_plat_sysinfo_140 = notes_plat_sysinfo_145 = From /etc/*release* /etc/*version* notes_plat_sysinfo_150 = SuSE-release: notes_plat_sysinfo_155 = SUSE Linux Enterprise Server 12 (x86_64) notes_plat_sysinfo_160 = VERSION = 12 notes_plat_sysinfo_165 = PATCHLEVEL = 0 notes_plat_sysinfo_170 = # This file is deprecated and will be removed in a future service pack or notes_plat_sysinfo_175 = release. notes_plat_sysinfo_180 = # Please check /etc/os-release for details about this release. notes_plat_sysinfo_185 = os-release: notes_plat_sysinfo_190 = NAME="SLES" notes_plat_sysinfo_195 = VERSION="12" notes_plat_sysinfo_200 = VERSION_ID="12" notes_plat_sysinfo_205 = PRETTY_NAME="SUSE Linux Enterprise Server 12" notes_plat_sysinfo_210 = ID="sles" notes_plat_sysinfo_215 = ANSI_COLOR="0;32" notes_plat_sysinfo_220 = CPE_NAME="cpe:/o:suse:sles:12" notes_plat_sysinfo_225 = notes_plat_sysinfo_230 = uname -a: notes_plat_sysinfo_235 = Linux linux-0171 3.12.28-4-default #1 SMP Thu Sep 25 17:02:34 UTC 2014 notes_plat_sysinfo_240 = (9879bd4) x86_64 x86_64 x86_64 GNU/Linux notes_plat_sysinfo_245 = notes_plat_sysinfo_250 = run-level 3 Feb 10 11:28 notes_plat_sysinfo_255 = notes_plat_sysinfo_260 = SPEC is set to: /root/previous-cpu2006-1.2 notes_plat_sysinfo_265 = Filesystem Type Size Used Avail Use% Mounted on notes_plat_sysinfo_270 = /dev/sda2 ext4 246G 19G 226G 8% / notes_plat_sysinfo_275 = Additional information from dmidecode: notes_plat_sysinfo_280 = notes_plat_sysinfo_285 = Warning: Use caution when you interpret this section. The 'dmidecode' program notes_plat_sysinfo_290 = reads system data which is "intended to allow hardware to be accurately notes_plat_sysinfo_295 = determined", but the intent may not be met, as there are frequent changes to notes_plat_sysinfo_300 = hardware, firmware, and the "DMTF SMBIOS" standard. notes_plat_sysinfo_305 = notes_plat_sysinfo_310 = BIOS Dell Inc. 2.3.4 11/08/2016 notes_plat_sysinfo_315 = Memory: notes_plat_sysinfo_320 = 7x 00AD063200AD HMA82GR7MFR8N-UH 16 GB 2 rank 2400 MHz notes_plat_sysinfo_325 = 9x 00CE00B300CE M393A2K43BB1-CRC 16 GB 2 rank 2400 MHz notes_plat_sysinfo_330 = 8x Not Specified Not Specified notes_plat_sysinfo_335 = notes_plat_sysinfo_340 = (End of data from sysinfo program) hw_cpu_name = Intel Xeon E5-2680 v4 hw_disk = 2 x 2000 GB 7200 RPM SAS RAID 0 hw_nchips = 2 prepared_by = root (is never output, only tags rawfile) sw_file = ext4 sw_os000 = SUSE Linux Enterprise Server 12 sw_os001 = 3.12.28-4-default sw_state = Run level 3 (multi-user) # The following section was added automatically, and contains settings that # did not appear in the original configuration file, but were added to the # raw file after the run. default: notes_000 =Environment variables set by runspec before the start of the run: notes_005 =KMP_AFFINITY = "granularity=fine,scatter" notes_010 =LD_LIBRARY_PATH = "/root/previous-cpu2006-1.2/libs/32:/root/previous-cpu2006-1.2/libs/64:/root/previous-cpu2006-1.2/sh10.2" notes_015 =OMP_NUM_THREADS = "20" notes_020 = The Dell PowerEdge R730 and the PowerEdge R730xd models are electronically equivalent.