# Invocation command line:
# /spec16/bin/runspec --define external --rate 56 -c cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-20150812 --define smt --define cores=28 --define physicalfirst --define invoke_with_interleave --define drop_caches --define THP_enabled -o all fp
# output_root was not used for this run
############################################################################
############################################################################
# This is a sample config file. It was tested with:
#
#      Compiler name/version:       Intel Compiler 16.0
#      Operating system version:    64-Bit RedHat Enterprise Linux64 7.1
#      Hardware:                    Intel processors supporting AVX2
#
############################################################################
# SPEC CPU2006 Intel Linux64 config file
# 20150812 Intel Compiler 16.0 for Linux64
############################################################################
action      = validate
tune        = base,peak

     #
     ########################################################
     #         ATTENTION     ATTENTION     ATTENTION
     ########################################################
     #
     #     NOTE If you change fail_build then PLEASE also
     #     change the line 'define version', because
     #     SPEC review tools use 'ext' to track binaries.
     #
     ########################################################
%define version 20150812
     ext         = cpu2006-1.2-ic16.0-lin64-ws-avx2-rate-%{version}
     #
     # vvvvvvvvvvvv # do not change unless you read NOTE above
       fail_build=1 # do not change unless you read NOTE above
     # ^^^^^^^^^^^^ # do not change unless you read NOTE above
     #
     ########################################################
     #

#####################################################################################
# You can't change the line with fail_build=1 without changing the line ext=
# to reflect the data on which you re-built the binaries.
# In addition, the sw_compiler lines below, must be modified to match the description
# of the compiler being used to build the binaries
#####################################################################################
PATHSEP     = /
check_md5=1
reportable=1
bench_post_setup=sync
parallel_test=0
mean_anyway=1
sysinfo_program = specperl $[top]/config/sysinfo.rev6914

flagsurl000=http://www.spec.org/cpu2006/flags/Intel-ic16.0-official-linux64.xml
flagsurl001 = http://www.spec.org/cpu2006/flags/Huawei-Platform-Settings-BDW-V1.0.xml
%ifdef %{default-platform-flags}
flagsurl2=Default-Platform-Flags.xml
%endif

# Set some environment variables
preENV_LD_LIBRARY_PATH = $[top]/libs/32:$[top]/libs/64:$[top]/sh

#
# These are listed as benchmark-tuning-extension-machine
#
int=default=default=default:
CC=  icc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin
CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin
OBJ = .o
SMARTHEAP32_DIR = /sh
SMARTHEAP64_DIR = /sh
PORTABILITY = -D_FILE_OFFSET_BITS=64

fp=default=default=default:
CC=  icc   -m64
CXX= icpc  -m64
FC=  ifort -m64
OBJ = .o

# For UP systems, we need to know if the processors are ordered across cores first or in order
# If across cores, processors 0, 1, 2 and 3 are on distinct physical cores
# Otherwise, processors 0, 2, 4 and 6 are on distinct physical cores

default:
submit       = numactl --localalloc --physcpubind=$SPECCOPYNUM $command

%ifdef %{no-numa}
submit       = taskset -c $SPECCOPYNUM $command
%endif

####################################################################
# Compiler options
# for Nehalem use -xSSE4.2
# for processors prior to dunnington, replace -xSSE4.1 with -xSSSE3
####################################################################
default:
SSE          = -xCORE-AVX2
FASTNOSTATIC =  $(SSE) -ipo -O3 -no-prec-div
FAST         =  $(SSE) -ipo -O3 -no-prec-div

################################################################
#
# portability & libraries
#
#################### Portability Flags and Notes ############################

400.perlbench=default:
CPORTABILITY=      -DSPEC_CPU_LINUX_IA32

403.gcc=default:
EXTRA_CFLAGS=      -Dalloca=_alloca

462.libquantum=default:
CPORTABILITY=      -DSPEC_CPU_LINUX

483.xalancbmk=default:
CXXPORTABILITY=    -DSPEC_CPU_LINUX

fp=default:
PORTABILITY = -DSPEC_CPU_LP64

435.gromacs=default=default=default:
LDPORTABILITY = -nofor_main

436.cactusADM=default=default=default:
LDPORTABILITY = -nofor_main

454.calculix=default=default=default:
LDPORTABILITY = -nofor_main

481.wrf=default=default=default:
CPORTABILITY = -DSPEC_CPU_CASE_FLAG -DSPEC_CPU_LINUX


################################################################
# Tuning Flags
################################################################
#
# Base tuning default optimization
# Feedback directed optimization not allowed in baseline for CPU2006
# However there is no limit on the number of flags as long as the same
# flags are used in the same order for all benchmarks of a given language

471.omnetpp,473.astar,483.xalancbmk=default:
EXTRA_LIBS=  -L$(SMARTHEAP32_DIR) -lsmartheap
EXTRA_LDFLAGS= -Wl,-z,muldefs

int=base=default=default:
COPTIMIZE=    $(FASTNOSTATIC)  -opt-prefetch -opt-mem-layout-trans=3
CXXOPTIMIZE=  $(FASTNOSTATIC)  -opt-prefetch -opt-mem-layout-trans=3

fp=base=default=default:
OPTIMIZE=     $(FAST) -opt-prefetch
COPTIMIZE=    -auto-p32 -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=  -auto-p32 -ansi-alias -opt-mem-layout-trans=3

################################################################
# Peak Tuning Flags int 2006 fast
################################################################
int=peak=default:
COPTIMIZE=         -ansi-alias -opt-mem-layout-trans=3
CXXOPTIMIZE=       -ansi-alias -opt-mem-layout-trans=3
PASS1_CFLAGS     = -prof-gen:threadsafe -par-num-threads=1
PASS2_CFLAGS     = $(FASTNOSTATIC) -prof-use
PASS1_CXXFLAGS   = -prof-gen:threadsafe -par-num-threads=1
PASS2_CXXFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCFLAGS   = -prof-gen:threadsafe -par-num-threads=1
PASS2_LDCFLAGS   = $(FASTNOSTATIC) -prof-use
PASS1_LDCXXFLAGS = -prof-gen:threadsafe -par-num-threads=1
PASS2_LDCXXFLAGS = $(FASTNOSTATIC) -prof-use

400.perlbench=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64 -DSPEC_CPU_LINUX_X64
COPTIMIZE= -auto-ilp32

401.bzip2=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -opt-prefetch  -auto-ilp32 -ansi-alias

403.gcc=peak=default:
COPTIMIZE = $(FASTNOSTATIC)
feedback=0

429.mcf=peak=default:
basepeak=yes

445.gobmk=peak=default:
PASS1_CFLAGS     = -prof-gen:threadsafe -par-num-threads=1
PASS2_CFLAGS     = $(SSE) -prof-use
PASS1_LDCFLAGS   = -prof-gen:threadsafe -par-num-threads=1
PASS2_LDCFLAGS   = $(SSE) -prof-use

456.hmmer=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE=  $(FASTNOSTATIC) -unroll2  -auto-ilp32
feedback=no

458.sjeng=peak=default:
CC= icc -m64
CPORTABILITY= -DSPEC_CPU_LP64
COPTIMIZE= -unroll4 -auto-ilp32

462.libquantum=peak=default:
basepeak=yes

464.h264ref=peak=default:
COPTIMIZE=  -unroll2 -ansi-alias

471.omnetpp=peak=default:
CXXOPTIMIZE=  -ansi-alias -opt-ra-region-strategy=block

473.astar=peak=default:
basepeak=yes

483.xalancbmk=peak=default:
basepeak=yes

################################################################
# Peak Tuning Flags for FP
################################################################
fp=peak=default:
COPTIMIZE=       -auto-ilp32
CXXOPTIMIZE=     -auto-ilp32
PASS1_CFLAGS =   -prof-gen:threadsafe -par-num-threads=1
PASS2_CFLAGS =   $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_CXXFLAGS = -prof-gen:threadsafe -par-num-threads=1
PASS2_CXXFLAGS = $(FASTNOSTATIC) -opt-mem-layout-trans=3 -prof-use
PASS1_FFLAGS =   -prof-gen:threadsafe -par-num-threads=1
PASS2_FFLAGS =   $(FASTNOSTATIC)                         -prof-use
PASS1_LDFLAGS =  -prof-gen:threadsafe -par-num-threads=1
PASS2_LDFLAGS =  $(FASTNOSTATIC)                         -prof-use

410.bwaves=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

416.gamess=peak=default:
OPTIMIZE= -unroll2 -inline-level=0  -scalar-rep-

433.milc=peak=default:
basepeak=yes

434.zeusmp=peak=default:
basepeak=yes
feedback=0

435.gromacs=peak=default:
OPTIMIZE= -opt-prefetch

436.cactusADM=peak=default:
basepeak=yes

437.leslie3d=peak=default:
basepeak=yes

####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

444.namd=peak=default:
CXXOPTIMIZE= -fno-alias -auto-ilp32

447.dealII=peak=default:
basepeak=yes

450.soplex=peak=default:
PORTABILITY = -D_FILE_OFFSET_BITS=64
CXX= icpc -m32 -L/opt/intel/compilers_and_libraries_2016/linux/compiler/lib/ia32_lin
OPTIMIZE= -opt-malloc-options=3
CXXOPTIMIZE=
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

453.povray=peak=default:
CXXOPTIMIZE= -unroll4  -ansi-alias

454.calculix=peak=default:
basepeak=yes

459.GemsFDTD=peak=default:
basepeak=yes
####################################################################################################################################
%ifdef %{smt}
copies=%{cores}
%ifdef %{physicallogical}
submit       = numactl --localalloc --physcpubind=`expr 2 \\* $SPECCOPYNUM` $command
%ifdef %{no-numa}
submit       = taskset -c `expr 2 \\* $SPECCOPYNUM` $command
%endif
%endif
%endif
####################################################################################################################################

465.tonto=peak=default:
OPTIMIZE= -unroll4 -auto -inline-calloc -opt-malloc-options=3

470.lbm=peak=default:
basepeak=yes

481.wrf=peak=default:
basepeak=yes

482.sphinx3=peak=default:
basepeak=yes

#################################################################
# (Edit this to match your system)
#################################################################

default=default=default=default:
license_num      = 3175
test_sponsor     = Huawei
hw_avail         = Mar-2016
sw_avail         = Mar-2016
tester           = Huawei
hw_cpu_name      = Intel Trademarked CPU Name
hw_cpu_char      =Intel Turbo Boost Technology up to 3.50 GHz
hw_cpu_mhz       = 2600
hw_disk          = 9999 GB SATA, 9999RPM
hw_fpu           = Integrated
hw_memory000     = 512 GB (16 x 32 GB 2Rx4 PC4-2400T-R)
hw_model         = Huawei CH121 V3 (Intel Xeon E5-2690 v4)
hw_ncpuorder     = 1,2 chip
hw_ncores        = 28
hw_nchips        = 9999
hw_ncoresperchip = 14
hw_nthreadspercore = 2
hw_other         = None
hw_pcache        = 32 KB I + 32 KB D on chip per core
hw_scache        = 256 KB I+D on chip per core
hw_tcache        = 35 MB I+D on chip per chip
hw_ocache        = None
hw_vendor        = Huawei
prepared_by      = <Insert Entity Name>
sw_file          = ReiserFS
sw_os001         = RedHat EL 6.4
sw_state         = Run level 3 (multi-user)
notes_submit_000 = The numactl mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_005 = was used to generate numactl commands to bind each copy to a specific processor.
notes_submit_010 = For details, please see the config file.
%ifdef %{no-numa}
notes_submit_000 = The taskset mechanism was used to bind copies to processors. The config file option 'submit'
notes_submit_001 = was used to generate taskset commands to bind each copy to a specific processor.
notes_submit_002 = For details, please see the config file.
%endif
notes_015        = Binaries compiled on a system with 1x Intel Core i5-4670K CPU + 32GB
notes_020        = memory using RedHat EL 7.1
notes_os_000     = Stack size set to unlimited using "ulimit -s unlimited"

int=default=default=default:
sw_compiler001   = C/C++: Version 16.0.0.101 of Intel C++ Studio XE
sw_compiler002   = for Linux
sw_base_ptrsize  = 32-bit
sw_peak_ptrsize  = 32/64-bit
sw_other001      = Microquill SmartHeap V10.2

default:
%ifdef %{THP_enabled}
notes_025        = Transparent Huge Pages enabled with:
notes_030        = echo always > /sys/kernel/mm/transparent_hugepage/enabled
%endif

%ifdef %{THP_disabled}
notes_200        = Transparent Huge Pages disabled with:
notes_201        = echo never  > /sys/kernel/mm/transparent_hugepage/enabled
%endif

%ifdef %{drop_caches}
notes_035        = Filesystem page cache cleared with:
notes_040        = echo 1>       /proc/sys/vm/drop_caches
%endif

%ifdef %{invoke_with_interleave}
notes_045        = runspec command invoked through numactl i.e.:
notes_050        = numactl --interleave=all runspec <etc>
notes_055 = The Huawei CH121 V3 and Huawei CH222 V3
notes_060 = are electronically equivalent.
notes_065 = The results have been measured on a Huawei CH121 V3 model
%endif

fp=default=default=default:
sw_compiler000   = C/C++: Version 16.0.0.101 of Intel C++ Studio XE
sw_compiler001   = for Linux;
sw_compiler002   = Fortran: Version 16.0.0.101 of Intel Fortran
sw_compiler003   = Studio XE for Linux
sw_base_ptrsize  = 32/64-bit
sw_peak_ptrsize  = 32/64-bit
sw_other = None


# The following settings were obtained by running 'specperl $[top]/config/sysinfo.rev6914'
default:
notes_plat_sysinfo_000 = Sysinfo program /spec16/config/sysinfo.rev6914
notes_plat_sysinfo_005 = $Rev: 6914 $ $Date:: 2014-06-25 #$ e3fbb8667b5a285932ceab81e28219e1
notes_plat_sysinfo_010 = running on linux-4m6y Mon Oct 31 18:39:48 2016
notes_plat_sysinfo_015 =
notes_plat_sysinfo_020 = This section contains SUT (System Under Test) info as seen by
notes_plat_sysinfo_025 = some common utilities.  To remove or add to this section, see:
notes_plat_sysinfo_030 =   http://www.spec.org/cpu2006/Docs/config.html#sysinfo
notes_plat_sysinfo_035 =
notes_plat_sysinfo_040 = From /proc/cpuinfo
notes_plat_sysinfo_045 =    model name : Intel(R) Xeon(R) CPU E5-2690 v4@ 2.60GHz
notes_plat_sysinfo_050 =       2 "physical id"s (chips)
notes_plat_sysinfo_055 =       56 "processors"
notes_plat_sysinfo_060 =    cores, siblings (Caution: counting these is hw and system dependent.  The
notes_plat_sysinfo_065 =    following excerpts from /proc/cpuinfo might not be reliable.  Use with
notes_plat_sysinfo_070 =    caution.)
notes_plat_sysinfo_075 =       cpu cores : 14
notes_plat_sysinfo_080 =       siblings  : 28
notes_plat_sysinfo_085 =       physical 0: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_090 =       physical 1: cores 0 1 2 3 4 5 6 8 9 10 11 12 13 14
notes_plat_sysinfo_095 =    cache size : 17920 KB
notes_plat_sysinfo_100 =
notes_plat_sysinfo_105 = From /proc/meminfo
notes_plat_sysinfo_110 =    MemTotal:       528824412 kB
notes_plat_sysinfo_115 =    HugePages_Total:       0
notes_plat_sysinfo_120 =    Hugepagesize:       2048 kB
notes_plat_sysinfo_125 =
notes_plat_sysinfo_130 = /usr/bin/lsb_release -d
notes_plat_sysinfo_135 =    SUSE Linux Enterprise Server 12 SP1
notes_plat_sysinfo_140 =
notes_plat_sysinfo_145 = From /etc/*release* /etc/*version*
notes_plat_sysinfo_150 =    SuSE-release:
notes_plat_sysinfo_155 =       SUSE Linux Enterprise Server 12 (x86_64)
notes_plat_sysinfo_160 =       VERSION = 12
notes_plat_sysinfo_165 =       PATCHLEVEL = 1
notes_plat_sysinfo_170 =       # This file is deprecated and will be removed in a future service pack or
notes_plat_sysinfo_175 =       release.
notes_plat_sysinfo_180 =       # Please check /etc/os-release for details about this release.
notes_plat_sysinfo_185 =    os-release:
notes_plat_sysinfo_190 =       NAME="SLES"
notes_plat_sysinfo_195 =       VERSION="12-SP1"
notes_plat_sysinfo_200 =       VERSION_ID="12.1"
notes_plat_sysinfo_205 =       PRETTY_NAME="SUSE Linux Enterprise Server 12 SP1"
notes_plat_sysinfo_210 =       ID="sles"
notes_plat_sysinfo_215 =       ANSI_COLOR="0;32"
notes_plat_sysinfo_220 =       CPE_NAME="cpe:/o:suse:sles:12:sp1"
notes_plat_sysinfo_225 =
notes_plat_sysinfo_230 = uname -a:
notes_plat_sysinfo_235 =    Linux linux-4m6y 3.12.49-11-default #1 SMP Wed Nov 11 20:52:43 UTC 2015
notes_plat_sysinfo_240 =    (8d714a0) x86_64 x86_64 x86_64 GNU/Linux
notes_plat_sysinfo_245 =
notes_plat_sysinfo_250 = run-level 3 Oct 31 14:36 last=5
notes_plat_sysinfo_255 =
notes_plat_sysinfo_260 = SPEC is set to: /spec16
notes_plat_sysinfo_265 =    Filesystem     Type  Size  Used Avail Use% Mounted on
notes_plat_sysinfo_270 =    /dev/sda2      xfs   456G  113G  344G  25% /
notes_plat_sysinfo_275 = Additional information from dmidecode:
notes_plat_sysinfo_280 =
notes_plat_sysinfo_285 =    Warning: Use caution when you interpret this section. The 'dmidecode' program
notes_plat_sysinfo_290 =    reads system data which is "intended to allow hardware to be accurately
notes_plat_sysinfo_295 =    determined", but the intent may not be met, as there are frequent changes to
notes_plat_sysinfo_300 =    hardware, firmware, and the "DMTF SMBIOS" standard.
notes_plat_sysinfo_305 =
notes_plat_sysinfo_310 =   BIOS Insyde Corp. 3.32 09/14/2016
notes_plat_sysinfo_315 =   Memory:
notes_plat_sysinfo_320 =    8x NO DIMM NO DIMM
notes_plat_sysinfo_325 =    16x Samsung M393A4K40BB1-CRC 32 GB 2 rank 2400 MHz
notes_plat_sysinfo_330 =
notes_plat_sysinfo_335 = (End of data from sysinfo program)
hw_cpu_name    = Intel Xeon E5-2690 v4
hw_disk        = 1 x 500 GB SATA, 7200 RPM
hw_nchips      = 2
prepared_by    = Huawei
sw_file        = xfs
sw_os000       = SUSE Linux Enterprise Server 12 SP1
sw_os001       = 3.12.49-11-default
sw_state       = Run level 3 (multi-user)


# The following section was added automatically, and contains settings that
# did not appear in the original configuration file, but were added to the
# raw file after the run.
default:
notes_000 =Environment variables set by runspec before the start of the run:
notes_005 =LD_LIBRARY_PATH = "/spec16/libs/32:/spec16/libs/64:/spec16/sh"
notes_010 =
notes_plat_form_000 = BIOS configuration:
notes_plat_form_005 = Set Power Efficiency Mode to Performance
notes_plat_form_010 = Set Snoop Mode to COD mode
notes_plat_form_015 = Set Patrol Scrub to Disable
notes_plat_form_020 = Baseboard Management Controller used to adjust the fan speed to 100%